Other Name: Sensor Kit, Theft Deterrent Or Front/Rear/Side Object; Parking Aid Sensor; Ultrasonic Sensor; Parking Sensors; Reverse Sensor; Module; Theft Deterrent Or Object Detection; Sensor Package, Front And Rear Bumper/Fascia Face
Position: Rear
Replaces: 13415478, 23130107
Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
2015-2020 Chevrolet Tahoe | LS, LT, LTZ, PPV, Premier, SSV | 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
Other Name: Sensor, Theft Deterrent Or Front/Rear/Side Object; Parking Aid Sensor; Ultrasonic Sensor; Parking Sensors; Reverse Sensor; Alarm; Sensor Kit, Theft Deterrent for Front/Rear/Side Objects; Front and Rear Bumper/Fascia.
Position: Rear
Replaces: 19116085
Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
2007-2014 Chevrolet Tahoe | Hybrid, LS, LT, LTZ | 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L FULL HYBRID EV-FLEX (FHEV), 8 Cyl 6.0 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
Other Name: Switch, Ignition Switch Warning, Lock, Headlamp, Theft Deterrent Or Front/Rear/Side Object; Switch,Theft Deterrent Or Front/Rear/Side/Intake Object
Position: Rear
Warranty: This genuine part is guaranteed by GM's
factory warranty.
Fits the following Vehicles:
2002-2004 Chevrolet Tahoe | LS, LT, Z71 | 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS
Chevrolet Tahoe Parking Assist Distance Sensor
Our website offers an extensive catalog of genuine Chevrolet Tahoe Parking Assist Distance Sensor at unbeatable prices. Every OEM Chevrolet Tahoe Parking Assist Distance Sensor comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!
Chevrolet Tahoe Parking Assist Distance Sensor Parts Questions & Experts Answers
Q: How to replace the rear Parking Assist Distance Sensor on Chevrolet Tahoe?
A: The electrical connectors to the rear object sensor need to be detached before trying to replace it. Press the housing lock tabs until you can remove the rear object sensor. Apply a small-size screwdriver to detach the housing tabs while you gently pull out the spring through the use of . Pushing the tabs from the housing interior will expose it so you can slide the bezel through the fascia. An operator must paint the new rear object sensor while being cautious to avoid refinished sensors because sensor operation fails with excessive paint buildup; a proper paint thickness gauge checks that the paint does not surpass 6 mils for non-ferrous metals. Take the sensor bezel and fit it inside the fascia so that the keyhole lines up with the key while the bezel sharp ends push from inside. Put the housing into position on the bezel while working on the fascia's rear face until it secures in the bezel's cutouts. Push the spring into place inside the housing until it reaches complete seating position and verify that the sensor remains tightly attached against the bumper fascia at its mounting points on the top and bottom housing surface. Place the decoupling ring on the sensor before placing the sensor within the housing while directing its connector towards the passenger side of the fascia where the housing tabs should snap into placement. Finally, connect the electrical connectors.