How to replace the Camshaft Position Sensor on Bank 1 (Right Side) Intake on 2009 Chevrolet Traverse?

The first step to replace the Bank 1 (Right Side) Intake Camshaft Position Sensor requires removal of engine mount strut and bracket. Disconnect the engine wiring harness electrical connector which controls the bank 1 intake camshaft position (CMP) sensor and then remove the CMP sensor bolt and sensor . During installation you should attach the CMP sensor along with its bolt while tightening the bolt to reach 10 Nm torque (89 lb in). Reinstall the engine mount strut and bracket after connecting the engine wiring harness electrical connector to the bank 1 intake CMP sensor .

OEM 2009 Chevrolet Traverse Camshaft Position Sensor

Cam Position Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Camshaft Position Sensor found

View related parts
2009 Chevrolet Traverse Camshaft Position Sensor
Part Number: 12608424
$40.35 MSRP: $75.78
You Save: $35.43 (47%)
Ships in 1 Business Day
ADD TO CART
Product Specifications
- Other Name: Sensor, Distributor (Also Knock Sensor); Engine Camshaft Position Sensor; Camshaft Sensor
- Item Weight: 0.50 Pounds
- Item Dimensions: 3.3 x 2.6 x 0.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 12608424
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2009 Chevrolet Traverse Submodels:
- LS, LT, LTZ | 6 Cyl 3.6 L GAS

2009 Chevrolet Traverse Camshaft Position Sensor

With a comprehensive array of OEM 2009 Chevrolet Traverse Camshaft Position Sensor, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2009 Chevrolet Traverse Camshaft Position Sensor are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2009 Chevrolet Traverse Parts Questions & Experts Answers

Q: How to replace the Camshaft Position Sensor on Bank 1 (Right Side) Intake on 2009 Chevrolet Traverse?
A: The first step to replace the Bank 1 (Right Side) Intake Camshaft Position Sensor requires removal of engine mount strut and bracket. Disconnect the engine wiring harness electrical connector which controls the bank 1 intake camshaft position (CMP) sensor and then remove the CMP sensor bolt and sensor . During installation you should attach the CMP sensor along with its bolt while tightening the bolt to reach 10 Nm torque (89 lb in). Reinstall the engine mount strut and bracket after connecting the engine wiring harness electrical connector to the bank 1 intake CMP sensor .

Related 2009 Chevrolet Traverse Parts

Alternate Year Models

2010 Chevrolet Traverse Camshaft Position Sensor