How to replace the Camshaft Position Sensor for Bank 1 (Right Side) Intake on 2010 Chevrolet Traverse?

The procedure of Camshaft Position Sensor for Bank 1 (Right Side) Intake replacement begins by disconnecting the engine wiring harness electrical connector from the bank 1 intake camshaft position (CMP) sensor and requires removing both the CMP sensor bolt and sensor. When installing the CMP sensor be sure to bolt in place with a torque of 10 Nm (89 lb in). Reattach the engine wiring harness electrical connector first to the bank 1 intake CMP sensor.

OEM 2010 Chevrolet Traverse Camshaft Position Sensor

Cam Position Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Camshaft Position Sensor found

View related parts
2010 Chevrolet Traverse Camshaft Position Sensor
Part Number: 12684186
$17.04 MSRP: $34.60
You Save: $17.56 (51%)
ADD TO CART
Product Specifications
- Other Name: Sensor, Distributor (Also Knock Sensor); Engine Camshaft Position Sensor; Camshaft Sensor
- Replaces: 12615371
- Item Weight: 0.40 Pounds
- Item Dimensions: 4.6 x 2.7 x 2.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 12684186
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2010 Chevrolet Traverse Submodels:
- High Country, L, LS, LT, LTZ, Premier, RS | 6 Cyl 3.6 L GAS

2010 Chevrolet Traverse Camshaft Position Sensor

With a comprehensive array of OEM 2010 Chevrolet Traverse Camshaft Position Sensor, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2010 Chevrolet Traverse Camshaft Position Sensor are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2010 Chevrolet Traverse Parts Questions & Experts Answers

Q: How to replace the Camshaft Position Sensor for Bank 1 (Right Side) Intake on 2010 Chevrolet Traverse?
A: The procedure of Camshaft Position Sensor for Bank 1 (Right Side) Intake replacement begins by disconnecting the engine wiring harness electrical connector from the bank 1 intake camshaft position (CMP) sensor and requires removing both the CMP sensor bolt and sensor. When installing the CMP sensor be sure to bolt in place with a torque of 10 Nm (89 lb in). Reattach the engine wiring harness electrical connector first to the bank 1 intake CMP sensor.

Related 2010 Chevrolet Traverse Parts

Alternate Year Models

2009 Chevrolet Traverse Camshaft Position Sensor 2011 Chevrolet Traverse Camshaft Position Sensor