How to replace the knock sensor for Bank 2 on 2010 Chevrolet Traverse?

When changing the Knock Sensor for bank 2 we first cut off the negative Battery Cable. Next, take off the engine Oil Filter. De-energize the vehicle shutdown and disconnect the engine wiring harness electrical connector from the Knock Sensor of bank 2. Now loosen the Knock Sensor bolt and take out the Knock Sensor. For installation, mount the new Knock Sensor and thread the bolt to 23 nm (17 lb ft). Fasten the engine wiring harness electrical connector using bank 2 Knock Sensor. Lift up and properly support the car, then fit a new engine Oil Filter. Then reconnect negative cable of the battery.

OEM 2010 Chevrolet Traverse Knock Sensor

Engine Knock Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Knock Sensor found

View related parts
2010 Chevrolet Traverse Knock Sensor Part Number: 12729597
$19.80 MSRP: $37.18
You Save: $17.38 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Distributor (Also Knock Sensor); Camshaft Sensor
- Replaces: 12692505, 12605738, 12636736
- Condition: New
- SKU: 12729597
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following 2010 Chevrolet Traverse Submodels:
- High Country, L, LS, LT, LTZ, Premier, RS | 6 Cyl 3.6 L GAS

2010 Chevrolet Traverse Knock Sensor

With a comprehensive array of OEM 2010 Chevrolet Traverse Knock Sensor, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2010 Chevrolet Traverse Knock Sensor are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2010 Chevrolet Traverse Knock Sensor Parts and Q&A

Q: How to replace the knock sensor for Bank 2 on 2010 Chevrolet Traverse?
A: When changing the Knock Sensor for bank 2 we first cut off the negative Battery Cable. Next, take off the engine Oil Filter. De-energize the vehicle shutdown and disconnect the engine wiring harness electrical connector from the Knock Sensor of bank 2. Now loosen the Knock Sensor bolt and take out the Knock Sensor. For installation, mount the new Knock Sensor and thread the bolt to 23 nm (17 lb ft). Fasten the engine wiring harness electrical connector using bank 2 Knock Sensor. Lift up and properly support the car, then fit a new engine Oil Filter. Then reconnect negative cable of the battery.