How to replace the knock sensor for Bank 2 on Chevrolet Traverse?

When changing the Knock Sensor for bank 2 we first cut off the negative Battery Cable. Next, take off the engine Oil Filter. De-energize the vehicle shutdown and disconnect the engine wiring harness electrical connector from the Knock Sensor of bank 2. Now loosen the Knock Sensor bolt and take out the Knock Sensor. For installation, mount the new Knock Sensor and thread the bolt to 23 nm (17 lb ft). Fasten the engine wiring harness electrical connector using bank 2 Knock Sensor. Lift up and properly support the car, then fit a new engine Oil Filter. Then reconnect negative cable of the battery.

OEM Chevrolet Traverse Knock Sensor

Engine Knock Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Knock Sensors found

View related parts
Chevrolet Traverse Knock Sensor
Part Number: 12623095
$22.97 MSRP: $43.16
You Save: $20.19 (47%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Distributor (Also Knock Sensor)
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2018-2019 Chevrolet Traverse | RS | 4 Cyl 2.0 L GAS
View related parts
Chevrolet Traverse Knock Sensor
Part Number: 12729597
$19.41 MSRP: $36.46
You Save: $17.05 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Distributor (Also Knock Sensor); Camshaft Sensor
- Replaces: 12692505, 12605738, 12636736
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2009-2023 Chevrolet Traverse | High Country, L, LS, LT, LTZ, Premier, RS | 6 Cyl 3.6 L GAS

Chevrolet Traverse Knock Sensor

Our website offers an extensive catalog of genuine Chevrolet Traverse Knock Sensor at unbeatable prices. Every OEM Chevrolet Traverse Knock Sensor comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!

Chevrolet Traverse Knock Sensor Parts Questions & Experts Answers

Knock Sensor
12729597
Q: How to replace the knock sensor for Bank 2 on Chevrolet Traverse?
A: When changing the Knock Sensor for bank 2 we first cut off the negative Battery Cable. Next, take off the engine Oil Filter. De-energize the vehicle shutdown and disconnect the engine wiring harness electrical connector from the Knock Sensor of bank 2. Now loosen the Knock Sensor bolt and take out the Knock Sensor. For installation, mount the new Knock Sensor and thread the bolt to 23 nm (17 lb ft). Fasten the engine wiring harness electrical connector using bank 2 Knock Sensor. Lift up and properly support the car, then fit a new engine Oil Filter. Then reconnect negative cable of the battery.

Related Chevrolet Traverse Parts

Browse Chevrolet Traverse Knock Sensor by Years

2023 2022 2021 2020 2019 2018 2017 2016 2015 2014 2013 2012 2011 2010 2009