How to Replace the Brake Disc on 2009 GMC Canyon?

Set up the vehicle for work first. Turn off your vehicle and take out both the tire and wheel assembly before proceeding to remove the wheel bearing and hub unit. Place the Brake Disc assembly on wooden blocks to shield the surface that produces friction when you work on it. As you hold the assembly parts together you should take out the 6 Wheel Hub bolts and split the Wheel Hub from Brake Disc. You need to wipe away dirt and rust from the Wheel Hub and Brake Disc contact areas before proceeding. Place the Wheel Hub onto the Brake Disc correctly and install its 6 bolts with hand tools at 120 nm torque setting (89 lb ft). After these steps install the Wheel Hub and bearing before placing the tire back in position.

OEM 2009 GMC Canyon Brake Disc

Disc Rotor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Brake Disc found

View related parts
2009 GMC Canyon Rotor, Front
Part Number: 25832146
Product Specifications
- Other Name: Rotor Assembly-Front Brake; Disc Brake Hardware Kit; Brake Rotor; Rotor, Front And Rear Wheel Brake
- Position: Front
- Item Weight: 23.50 Pounds
- Item Dimensions: 13.9 x 14.2 x 3.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 25832146
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2009 GMC Canyon Submodels:
- SLE, SLT, WT | 4 Cyl 2.9 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS

2009 GMC Canyon Brake Disc

With a comprehensive array of OEM 2009 GMC Canyon Brake Disc, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2009 GMC Canyon Brake Disc are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2009 GMC Canyon Brake Disc Parts Questions & Experts Answers

Q: How to Replace the Brake Disc on 2009 GMC Canyon?
A: Set up the vehicle for work first. Turn off your vehicle and take out both the tire and wheel assembly before proceeding to remove the wheel bearing and hub unit. Place the Brake Disc assembly on wooden blocks to shield the surface that produces friction when you work on it. As you hold the assembly parts together you should take out the 6 Wheel Hub bolts and split the Wheel Hub from Brake Disc. You need to wipe away dirt and rust from the Wheel Hub and Brake Disc contact areas before proceeding. Place the Wheel Hub onto the Brake Disc correctly and install its 6 bolts with hand tools at 120 nm torque setting (89 lb ft). After these steps install the Wheel Hub and bearing before placing the tire back in position.