How to Replace the Brake Disc on GMC Canyon?

Check the brake master cylinder reservoir fluid level first to replace the Brake Disc. You need no brake fluid removal if the level stays between maximum-full and minimum lines but take some fluid to the midway point if it exceeds maximum-full. Position the Wheel Hub component on its suspension using two blocks of wood before taking out the Wheel Hub assembly. Use tools to separate the Wheel Hub/speed sensor bolt connection with the Brake Disc then remove the Brake Disc from the Wheel Bearing/hub assembly for cleaning of the contact areas. Everyone the Wheel Bearing/hub assembly on the Brake Disc and screw in its bolts. Start with cross-thread tightening to 20 n.m (15 lb ft) then re-tighten to 110 n.m (81 lb ft). Put the Wheel Bearing unit into the Steering Knuckle and place the vehicle back on the ground to check brake fluid levels. Finally, burnish the brakes.

Is Burnishing the Brake Pads and Brake Disc Essential for Proper Preparation After Servicing the Disc Brake System on GMC Canyon?

It is critical to burnish the brake pads and discs in order to properly prepare the braking surfaces after servicing the disc braking system especially during the situations where discs have been refinished or replaced or in the case where the pads have been replaced. In order to carry out such a procedure, choose a smooth road with slow traffic and pick up maximum pace of the vehicle leading to 48 km/h (30 mph) while ensuring that you do not over heat the brakes. Press brakes lightly to a moderate or firm pressure to stop the vehicle without letting the brakes lock. Repeat the process of acceleration and braking until about 20 stops have been made with enough cooling periods between stops to effectively burnish the brake pads and discs.

OEM GMC Canyon Brake Disc

Disc Rotor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

8 Brake Discs found

View related parts
GMC Canyon Rotor Part Number: 94775725
$141.37 MSRP: $274.38
You Save: $133.01 (49%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Rotor-Front Brake (Coated); Disc Brake Hardware Kit; Brake Rotor; Rotor, Front And Rear Wheel Brake
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2015-2020 GMC Canyon | All Terrain, Base, Denali, SL, SLE, SLT | 4 Cyl 2.5 L GAS, 4 Cyl 2.8 L DIESEL, 6 Cyl 3.6 L GAS
View related parts
GMC Canyon Rotor, Rear Part Number: 23387173
$104.66 MSRP: $203.14
You Save: $98.48 (49%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Rotor-Rear Brake; Brake Rotor; Rotor, Front And Rear Wheel Brake
- Position: Rear
- Replaces: 94778644
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2015-2020 GMC Canyon | All Terrain, Base, Denali, SL, SLE, SLT | 4 Cyl 2.5 L GAS, 4 Cyl 2.8 L DIESEL, 6 Cyl 3.6 L GAS
View related parts
GMC Canyon Rotor Part Number: 89040374
$107.33 MSRP: $200.27
You Save: $92.94 (47%)
ADD TO CART
Product Specifications
- Other Name: Rotor, Front Brake; Disc Brake Hardware Kit; Brake Rotor; Rotor, Front And Rear Wheel Brake
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2004-2008 GMC Canyon | SL, SLE, SLT, WT, Z71 Fleet, Z71 SL, Z71 SLE, Z85 SL, Z85 SLE | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS
View related parts
GMC Canyon Rotor Part Number: 85158898
$113.22 MSRP: $221.66
You Save: $108.44 (49%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Rotor-Front Brake (Coated); Rotor, Front And Rear Wheel Brake
- Replaces: 84703914
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2021-2022 GMC Canyon | AT4, Denali, Elevation, Elevation Standard | 4 Cyl 2.5 L GAS, 4 Cyl 2.8 L DIESEL, 6 Cyl 3.6 L GAS
View related parts
GMC Canyon Rotor, Rear Part Number: 84309171
$91.68 MSRP: $177.93
You Save: $86.25 (49%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Rotor-Rear Brake (Coated); Disc Brake Hardware Kit; Brake Rotor; Rotor, Front And Rear Wheel Brake
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2021-2022 GMC Canyon | AT4, Denali, Elevation, Elevation Standard | 4 Cyl 2.5 L GAS, 4 Cyl 2.8 L DIESEL, 6 Cyl 3.6 L GAS
View related parts
GMC Canyon Rotor Part Number: 13549409
$90.32 MSRP: $161.29
You Save: $70.97 (44%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Rotor-Front Brake (Coated); Rotor, Front And Rear Wheel Brake
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2023 GMC Canyon | AT4, AT4X, Denali, Elevation | 4 Cyl 2.7 L GAS
View related parts
GMC Canyon Rotor, Rear Part Number: 13539733
$94.16 MSRP: $168.14
You Save: $73.98 (44%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Rotor-Rear Brake (Coated); Rotor, Front And Rear Wheel Brake
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2023 GMC Canyon | AT4, AT4X, Denali, Elevation | 4 Cyl 2.7 L GAS
View related parts
GMC Canyon Rotor, Front Part Number: 25832146
Product Specifications
- Other Name: Rotor Assembly-Front Brake; Disc Brake Hardware Kit; Brake Rotor; Rotor, Front And Rear Wheel Brake
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2009-2012 GMC Canyon | SLE, SLT, WT | 4 Cyl 2.9 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS

GMC Canyon Brake Disc

Want to cut long-term maintenance and repair costs? Choose OEM Brake Disc. Those parts deliver top durability you can trust. On our site, you'll find a huge catalog of genuine GMC Canyon parts. Prices are unbeatable, so you can keep more in your pocket. Every OEM GMC Canyon Brake Disc includes a manufacturer's warranty. You can also get an easy return policy that keeps buying risk free. Fast delivery, get your car on the road quickly. It's simple to search, compare, and order. Stop guessing about quality or fit. Order today and save with parts that last.

The Brake Disc in GMC Canyon is a crucial part that makes up the disc brake system, offering the Contact Surface the Brake Pads require to coefficients that let them slow or stop the vehicle. Located at the axle or hub, the rotor turns with the wheel; and when brakes are applied, fluid-pressure compels the caliper to squeeze the pads onto the rotor. This design also favours heat dissipation, more especially in the vented rotors with cooling fins affixed to them. The GMC Canyon cars for years have employed several designs of Brake Discs such as solid types and vented types. Navidad rotors come in solid type indicated for small non-performance models while Vented rotors are usually used in performance models owing to their efficiency in cooling. It is advisable to maintain rotors, sometimes they experience some problems such as scoring, warping, and excessive runout thereby limiting the braking ability. In order to ensure the right performance of a car, special attention must be paid to the state of wheels and their rotors in particular, and the latter must be inspected and replaced more often whenever they become worn out.

GMC Canyon Brake Disc Parts and Q&A

Rotor
89040374
Q: How to Replace the Brake Disc on GMC Canyon?
A:
Check the brake master cylinder reservoir fluid level first to replace the Brake Disc. You need no brake fluid removal if the level stays between maximum-full and minimum lines but take some fluid to the midway point if it exceeds maximum-full. Position the Wheel Hub component on its suspension using two blocks of wood before taking out the Wheel Hub assembly. Use tools to separate the Wheel Hub/speed sensor bolt connection with the Brake Disc then remove the Brake Disc from the Wheel Bearing/hub assembly for cleaning of the contact areas. Everyone the Wheel Bearing/hub assembly on the Brake Disc and screw in its bolts. Start with cross-thread tightening to 20 n.m (15 lb ft) then re-tighten to 110 n.m (81 lb ft). Put the Wheel Bearing unit into the Steering Knuckle and place the vehicle back on the ground to check brake fluid levels. Finally, burnish the brakes.
Rotor, Front
25832146
Q: Is Burnishing the Brake Pads and Brake Disc Essential for Proper Preparation After Servicing the Disc Brake System on GMC Canyon?
A:
It is critical to burnish the brake pads and discs in order to properly prepare the braking surfaces after servicing the disc braking system especially during the situations where discs have been refinished or replaced or in the case where the pads have been replaced. In order to carry out such a procedure, choose a smooth road with slow traffic and pick up maximum pace of the vehicle leading to 48 km/h (30 mph) while ensuring that you do not over heat the brakes. Press brakes lightly to a moderate or firm pressure to stop the vehicle without letting the brakes lock. Repeat the process of acceleration and braking until about 20 stops have been made with enough cooling periods between stops to effectively burnish the brake pads and discs.