How to replace the steering knuckle on GMC Canyon?

The first step to replace a Steering Knuckle requires vehicle elevation followed by support methods. First remove the tire and wheel assembly before using a suitable jack to support the lower Control Arm. Supporting brake caliper assemblies with mechanics wire becomes important before total removal from the system. 4wd vehicles require isolating the front wheel drive shaft from the Steering Knuckle during replacement. The process begins by harvesting the speed sensor wiring harness from its retaining clips on the upper Control Arm and frame. This step must be followed by unseating the outer Tie Rod End from the knuckle. First remove the knuckle-connected upper Ball Joint before dislodging the lower Ball Joint. After removing the knuckle from both upper and lower control arms, remove the Wheel Hub and bearing assembly from the knuckle structure. Begin wheel assembly installation by placing the Wheel Hub and bearing assembly onto the knuckle then install the lower Control Arm/ball joint into the knuckle. Start by putting drive shafts of 4wd vehicles into the knuckle and then add upper Control Arm/ball joint assemblies. Put the outer Tie Rod End to its mating position on the knuckle after bolting down the speed sensor wiring harness clips into its notches. Attachment of brake caliper mounting bracket and wheel drive shaft retaining nut must follow specified requirements. Finish the installation by removing the lower Control Arm support then place on the tire wheel and lower down your vehicle.

OEM GMC Canyon Steering Knuckle

Front Steering Knuckle

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

16 Steering Knuckles found

View related parts
GMC Canyon Knuckle, Driver Side Part Number: 23298404
$111.97 MSRP: $190.64
You Save: $78.67 (42%)
ADD TO CART
Product Specifications
- Other Name: Knuckle, Steering
- Position: Driver Side
- Replaces: 94772426
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2015-2022 GMC Canyon | All Terrain, AT4, Base, Denali, Elevation, Elevation Standard, SL, SLE, SLT | 4 Cyl 2.5 L GAS, 4 Cyl 2.8 L DIESEL, 6 Cyl 3.6 L GAS
View related parts
GMC Canyon Knuckle, Passenger Side Part Number: 23298403
$111.97 MSRP: $190.64
You Save: $78.67 (42%)
ADD TO CART
Product Specifications
- Other Name: Knuckle, Steering
- Position: Passenger Side
- Replaces: 94772425
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2015-2022 GMC Canyon | All Terrain, AT4, Base, Denali, Elevation, Elevation Standard, SL, SLE, SLT | 4 Cyl 2.5 L GAS, 4 Cyl 2.8 L DIESEL, 6 Cyl 3.6 L GAS
View related parts
GMC Canyon Knuckle, Passenger Side Part Number: 84588072
$119.91 MSRP: $188.67
You Save: $68.76 (37%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Knuckle, Steering
- Position: Passenger Side
- Replaced by: 86588655
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2023 GMC Canyon | AT4, AT4X, Denali, Elevation | 4 Cyl 2.7 L GAS
View related parts
GMC Canyon Knuckle, Passenger Side Part Number: 84925032
$123.68 MSRP: $194.60
You Save: $70.92 (37%)
ADD TO CART
Product Specifications
- Other Name: Knuckle, Steering
- Position: Passenger Side
- Replaced by: 85777788
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2023 GMC Canyon | AT4, AT4X, Denali, Elevation | 4 Cyl 2.7 L GAS
View related parts
GMC Canyon Knuckle, Driver Side Part Number: 84925031
$103.11 MSRP: $161.51
You Save: $58.40 (37%)
ADD TO CART
Product Specifications
- Other Name: Knuckle, Steering
- Position: Driver Side
- Replaced by: 85777787
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2023 GMC Canyon | AT4, AT4X, Denali, Elevation | 4 Cyl 2.7 L GAS
View related parts
GMC Canyon Knuckle, Passenger Side Part Number: 19303845
$520.38 MSRP: $826.20
You Save: $305.82 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Knuckle, Steering
- Position: Passenger Side
- Replaces: 19208800
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2009-2012 GMC Canyon | SLE, SLT, WT | 4 Cyl 2.9 L GAS, 5 Cyl 3.7 L GAS
View related parts
GMC Canyon Knuckle, Passenger Side Part Number: 19303849
Product Specifications
- Other Name: Knuckle, Steering
- Position: Passenger Side
- Replaces: 19208804
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2009-2012 GMC Canyon | SLE, SLT, WT | 4 Cyl 2.9 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
View related parts
GMC Canyon Knuckle, Driver Side Part Number: 19303836
Product Specifications
- Other Name: Knuckle, Steering
- Position: Driver Side
- Replaces: 15184896
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2004-2008 GMC Canyon | SL, SLE, SLT, WT, Z71 Fleet, Z71 SL, Z71 SLE, Z85 SL, Z85 SLE | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS
View related parts
GMC Canyon Knuckle, Passenger Side Part Number: 19303835
Product Specifications
- Other Name: Knuckle, Steering
- Position: Passenger Side
- Replaces: 15184895
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2004-2008 GMC Canyon | SL, SLE, SLT, WT, Z71 Fleet, Z71 SL, Z71 SLE, Z85 SL, Z85 SLE | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS
View related parts
GMC Canyon Knuckle, Passenger Side Part Number: 19303833
Product Specifications
- Other Name: Knuckle, Steering
- Position: Passenger Side
- Replaces: 15178871
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2004-2008 GMC Canyon | SL, SLE, SLT, WT, Z71 Fleet, Z71 SL, Z71 SLE, Z85 SL, Z85 SLE | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS
View related parts
GMC Canyon Knuckle, Driver Side Part Number: 19303834
$257.84 MSRP: $405.70
You Save: $147.86 (37%)
Product Specifications
- Other Name: Knuckle, Steering
- Position: Driver Side
- Replaces: 15178872
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2004-2008 GMC Canyon | SL, SLE, SLT, WT, Z71 Fleet, Z71 SL, Z71 SLE, Z85 SL, Z85 SLE | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS
View related parts
GMC Canyon Knuckle, Driver Side Part Number: 84588071
$111.73 MSRP: $175.02
You Save: $63.29 (37%)
Product Specifications
- Other Name: Knuckle, Steering
- Position: Driver Side
- Replaced by: 86588654
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2023 GMC Canyon | AT4, AT4X, Denali, Elevation | 4 Cyl 2.7 L GAS
View related parts
GMC Canyon Knuckle, Driver Side Part Number: 19303850
Product Specifications
- Other Name: Knuckle, Steering
- Position: Driver Side
- Replaces: 19208805
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2009-2012 GMC Canyon | SLE, SLT, WT | 4 Cyl 2.9 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
View related parts
GMC Canyon Knuckle, Driver Side Part Number: 15178874
Product Specifications
- Other Name: Knuckle, Steering
- Position: Driver Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2004-2008 GMC Canyon | SL, SLE, SLT, WT, Z71 Fleet, Z71 SL, Z71 SLE, Z85 SL, Z85 SLE | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS
View related parts
GMC Canyon Knuckle, Passenger Side Part Number: 15178873
Product Specifications
- Other Name: Knuckle, Steering
- Position: Passenger Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2004-2008 GMC Canyon | SL, SLE, SLT, WT, Z71 Fleet, Z71 SL, Z71 SLE, Z85 SL, Z85 SLE | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS
View related parts
GMC Canyon Knuckle, Driver Side Part Number: 19303846
$244.64 MSRP: $384.93
You Save: $140.29 (37%)
Product Specifications
- Other Name: Knuckle, Steering
- Position: Driver Side
- Replaces: 19208801
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2009-2012 GMC Canyon | SLE, SLT, WT | 4 Cyl 2.9 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS

GMC Canyon Steering Knuckle

Want to cut long-term maintenance and repair costs? Choose OEM Steering Knuckle. Those parts deliver top durability you can trust. On our site, you'll find a huge catalog of genuine GMC Canyon parts. Prices are unbeatable, so you can keep more in your pocket. Every OEM GMC Canyon Steering Knuckle includes a manufacturer's warranty. You can also get an easy return policy that keeps buying risk free. Fast delivery, get your car on the road quickly. It's simple to search, compare, and order. Stop guessing about quality or fit. Order today and save with parts that last.

The Steering Knuckle of GMC Canyon vehicles is a heavy component that attaches the suspension as well as the steering mechanism to the front wheels. It has mounting loops for control arms, tie-rod ends, spindle or the hub, and it has the ability to move up and down in accordance with the roads' surface and move horizontally for the purpose of steering. GMC Canyon type Steering Knuckles come in different forms depending on the type of GMC Canyon vehicular structures that are rear-wheel drive (RWD) and those that have front, all, four-wheel drive (FWD, AWD or 4WD). RWD models may have the integral spindle integrated into the Steering Knuckle, and FWD/AWD/4WD designs have a drive axle passing through the Steering Knuckle with self-expanding or bolt-on hubs. Indeed with the development of different kingpin designs to the modern days, it has become evident that the Steering Knuckle is a versatile part and plays a critical role in managing wheel stability and control. This means that constant checkups of the Steering Knuckle are vital in enhancing the overall efficiency as well as safety in GMC Canyon vehicles.

GMC Canyon Steering Knuckle Parts Questions & Experts Answers

Knuckle, Driver Side
19303834
Q: How to replace the steering knuckle on GMC Canyon?
A:
The first step to replace a Steering Knuckle requires vehicle elevation followed by support methods. First remove the tire and wheel assembly before using a suitable jack to support the lower Control Arm. Supporting brake caliper assemblies with mechanics wire becomes important before total removal from the system. 4wd vehicles require isolating the front wheel drive shaft from the Steering Knuckle during replacement. The process begins by harvesting the speed sensor wiring harness from its retaining clips on the upper Control Arm and frame. This step must be followed by unseating the outer Tie Rod End from the knuckle. First remove the knuckle-connected upper Ball Joint before dislodging the lower Ball Joint. After removing the knuckle from both upper and lower control arms, remove the Wheel Hub and bearing assembly from the knuckle structure. Begin wheel assembly installation by placing the Wheel Hub and bearing assembly onto the knuckle then install the lower Control Arm/ball joint into the knuckle. Start by putting drive shafts of 4wd vehicles into the knuckle and then add upper Control Arm/ball joint assemblies. Put the outer Tie Rod End to its mating position on the knuckle after bolting down the speed sensor wiring harness clips into its notches. Attachment of brake caliper mounting bracket and wheel drive shaft retaining nut must follow specified requirements. Finish the installation by removing the lower Control Arm support then place on the tire wheel and lower down your vehicle.