ChevyParts
My Garage
My Account
Cart
OEM 2009 GMC Canyon Rack And Pinion
Steering Rack And Pinion- Select Vehicle by Model
- Select Vehicle by VIN
Select Vehicle by Model
orMake
Model
Year
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).
3 Rack And Pinions found
2009 GMC Canyon Steering Gear Part Number: 15951338
$455.60 MSRP: $782.48You Save: $326.88 (42%)Ships in 1-2 Business DaysProduct Specifications- Other Name: Gear, Steering; Gear Assembly
- Replaces: 25817575, 15864178, 15921544
- Item Weight: 7.40 Pounds
- Item Dimensions: 29.9 x 7.4 x 6.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15951338
- Warranty: This genuine part is guaranteed by GM's factory warranty.
2009 GMC Canyon Steering Gear Part Number: 25912269
$515.01 MSRP: $999.54You Save: $484.53 (49%)Product Specifications- Other Name: Gear, Steering; Gear Assembly
- Item Weight: 26.60 Pounds
- Item Dimensions: 64.1 x 13.1 x 12.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25912269
- Warranty: This genuine part is guaranteed by GM's factory warranty.
2009 GMC Canyon Steering Gear Part Number: 15951337
Product Specifications- Other Name: Gear, Steering; Gear Assembly
- Item Weight: 21.10 Pounds
- Item Dimensions: 61.6 x 12.2 x 10.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15951337
- Warranty: This genuine part is guaranteed by GM's factory warranty.
2009 GMC Canyon Rack And Pinion
With a comprehensive array of OEM 2009 GMC Canyon Rack And Pinion, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2009 GMC Canyon Rack And Pinion are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.
2009 GMC Canyon Rack And Pinion Parts and Q&A
- Q: How to replace the rack and pinion on 2009 GMC Canyon?A: Vehicle maintenance starts by supporting the lifted vehicle then removing both front tires and wheels. The first step requires engine protection shield removal if your vehicle has it installed. Place a drain pan to contain the fluid as you disconnect the outer Tie Rod End from the Steering Knuckle. Disengage the Rack And Pinion Power Steering Hose automobile assembly while separating the intermediate shaft from the Rack And Pinion through removal of its coupler clamp bolt. Rack And Pinion installation requires technicians to remove vertical and horizontal mounting nuts, washers, and bolts before extracting the crossmember when necessary. Position the Rack And Pinion into the vehicle before starting by loosely attaching the horizontal mounting nuts, washers, and bolts then completing the installation with crossmember installation if required. Install the vertical mounting nuts, washers and bolts at first but then apply torque to the long bolts to 130 nm (96 lb ft) and the isolator clamp bolts to 100 nm (74 lb ft). Attach the Rack And Pinion's intermediate shaft and follow by fastening the coupler clamp bolt. First connect the Power Steering Hose assembly to the Rack And Pinion and reinstall the engine protection shield (if present). Lastly attach the outer Tie Rod End to the Steering Knuckle. After lowering the vehicle down reattach both front tire and wheel assemblies and proceed with draining the power steering system.
Related 2009 GMC Canyon Parts
2009 GMC Canyon Steering Wheel
2009 GMC Canyon Ignition Lock Cylinder
2009 GMC Canyon Power Steering Hose
2009 GMC Canyon Power Steering Pump
2009 GMC Canyon Power Steering Reservoir
2009 GMC Canyon Rack and Pinion Boot
2009 GMC Canyon Shift Solenoid
2009 GMC Canyon Steering Column
2009 GMC Canyon Steering Column Cover
2009 GMC Canyon Steering Shaft
2009 GMC Canyon Tie Rod
2009 GMC Canyon Tie Rod End