How to replace the wheel cylinder on 2009 GMC Canyon?

Before replacing the Wheel Cylinder you need to remove the rear brake shoes first. Protect the brake system by capping the brake pipe fitting and plugging the Wheel Cylinder while you disconnect those components. First you should unscrew the Wheel Cylinder bolts and lift out the Wheel Cylinder . After positioning the new Wheel Cylinder install the Wheel Cylinder bolts then tighten them to 18 nm (13 lb ft). Attach the brake pipe to the Wheel Cylinder and tighten it at 19 nm (14 lb ft) torque. Reinstall the brake shoes at the rear part and complete the Wheel Cylinder bleeding according to hydraulic brake system standards.

OEM 2009 GMC Canyon Wheel Cylinder

Brake Wheel Cylinder

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Wheel Cylinder found

View related parts
2009 GMC Canyon Wheel Cylinder
Part Number: 25832114
$41.64 MSRP: $77.71
You Save: $36.07 (47%)
ADD TO CART
Product Specifications
- Other Name: Cylinder, Wheel Brake Cylinder/Caliper; Wheel Cylinder Repair Kit
- Position: Rear
- Item Weight: 1.40 Pounds
- Item Dimensions: 4.1 x 4.0 x 2.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- Require Quantity: 2
- SKU: 25832114
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2009 GMC Canyon Submodels:
- SLE, SLT, WT | 4 Cyl 2.9 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS

2009 GMC Canyon Wheel Cylinder

With a comprehensive array of OEM 2009 GMC Canyon Wheel Cylinder, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2009 GMC Canyon Wheel Cylinder are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2009 GMC Canyon Wheel Cylinder Parts Questions & Experts Answers

Q: How to replace the wheel cylinder on 2009 GMC Canyon?
A: Before replacing the Wheel Cylinder you need to remove the rear brake shoes first. Protect the brake system by capping the brake pipe fitting and plugging the Wheel Cylinder while you disconnect those components. First you should unscrew the Wheel Cylinder bolts and lift out the Wheel Cylinder . After positioning the new Wheel Cylinder install the Wheel Cylinder bolts then tighten them to 18 nm (13 lb ft). Attach the brake pipe to the Wheel Cylinder and tighten it at 19 nm (14 lb ft) torque. Reinstall the brake shoes at the rear part and complete the Wheel Cylinder bleeding according to hydraulic brake system standards.

Related 2009 GMC Canyon Parts

Alternate Year Models

2008 GMC Canyon Wheel Cylinder 2010 GMC Canyon Wheel Cylinder