OEM GMC Canyon Wheel Cylinder

Brake Wheel Cylinder
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Wheel Cylinders found

  • GMC Canyon Wheel Cylinder - 25832114
    GMC Canyon Wheel Cylinder Diagram - 25832114
    View related parts

    GMC Canyon Wheel Cylinder

    Part Number: 25832114
    $41.64 MSRP: $77.71
    You Save: $36.07 (47%)
    ADD TO CART
    Product Specifications
    • Other Name: Cylinder, Wheel Brake Cylinder/Caliper; Wheel Cylinder Repair Kit
    • Position: Rear
    • Warranty: This genuine part is guaranteed by GM's factory warranty.
    Fits the following Vehicles:
    • 2009-2012 GMC Canyon | SLE, SLT, WT | 4 Cyl 2.9 L GAS, 5 Cyl 3.7 L GAS, 8 Cyl 5.3 L GAS
  • GMC Canyon Wheel Cylinder - 19213348
    GMC Canyon Wheel Cylinder Diagram - 19213348
    View related parts
    Product Specifications
    • Other Name: Cylinder Assembly, Rear Brake; Wheel Cylinder Repair Kit; Cylinder, Wheel Brake Cylinder/Caliper
    • Position: Rear
    • Replaces: 89058902
    • Warranty: This genuine part is guaranteed by GM's factory warranty.
    Fits the following Vehicles:
    • 2004-2008 GMC Canyon | SL, SLE, SLT, WT, Z71 Fleet, Z71 SL, Z71 SLE, Z85 SL, Z85 SLE | 4 Cyl 2.8 L GAS, 4 Cyl 2.9 L GAS, 5 Cyl 3.5 L GAS, 5 Cyl 3.7 L GAS

GMC Canyon Wheel Cylinder

Our website offers an extensive catalog of genuine GMC Canyon Wheel Cylinder at unbeatable prices. Every OEM GMC Canyon Wheel Cylinder comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!

GMC Canyon Wheel Cylinder Parts Questions & Experts Answers

  • Q: How to replace the wheel cylinder on GMC Canyon?
    A: First lift the vehicle before starting the Wheel Cylinder replacement. Take off the rear Brake Shoe parts before disconnecting the Brake Line from the Wheel Cylinder and plugging it to stop contaminants from entering. Take off the Wheel Cylinder by first unthreading the mounting bolts then removing it from the backing plate. Secure the new Wheel Cylinder onto the backing plate by placing its mounting bolts and tightening them to 13 lb ft (18 N.m). Fit the Brake Line fitting to the Wheel Cylinder and secure it with 19 n.m final torque (14 lb ft). You should install the new brake shoes in the rear and perform proper brake system bleeding procedures. Bring the vehicle down to the ground and measure the master cylinder reservoir level for fluid.

Related GMC Canyon Parts