How to replace the Crankshaft Position Sensor on 2009 GMC Savana 1500?

The Crankshaft Position Sensor replacement requires that you position the ignition and start switch to off or lock while shutting down all electrical loads to eliminate electrical sparks. Disconnect the negative Battery Cable. Lift the vehicle before removing the Starter assembly. The crankshaft position (CKP) sensor electrical connector needs removal so you can clean the surrounding area to keep engine debris outside. To replace the sensor first remove its retaining fastener followed by removing the ckp sensor itself. To install the ckp sensor follow this process: put sensor in position then install its retaining fastener before tightening it to 25 nm (18 lb ft). Reconnect the ckp sensor electrical connector before returning the Starter into position and lowering the vehicle and reconnecting the negative Battery Cable. Running the crankshaft position system variation learn procedure is required following both sensor removal and replacement.

OEM 2009 GMC Savana 1500 Crankshaft Position Sensor

Engine Crankshaft Position Sensor

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Crankshaft Position Sensors found

View related parts
2009 GMC Savana 1500 Crankshaft Position Sensor
Part Number: 12595966
$36.96 MSRP: $75.06
You Save: $38.10 (51%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Sensor, Distributor (Also Knock Sensor); Crankshaft Sensor
- Item Weight: 0.40 Pounds
- Item Dimensions: 2.2 x 2.1 x 1.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 12595966
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2009 GMC Savana 1500 Submodels:
- Base | 6 Cyl 4.3 L GAS
View related parts
2009 GMC Savana 1500 Crankshaft Position Sensor
Part Number: 12703627
$58.96 MSRP: $105.28
You Save: $46.32 (44%)
Product Specifications
- Other Name: Sensor Assembly-Crankshaft Position; Crankshaft Sensor; Sensor, Distributor (Also Knock Sensor)
- Replaces: 12585546
- Item Weight: 2.30 Pounds
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 12703627
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2009 GMC Savana 1500 Submodels:
- Base, LS, LT | 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS

2009 GMC Savana 1500 Crankshaft Position Sensor

With a comprehensive array of OEM 2009 GMC Savana 1500 Crankshaft Position Sensor, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2009 GMC Savana 1500 Crankshaft Position Sensor are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2009 GMC Savana 1500 Crankshaft Position Sensor Parts Questions & Experts Answers

Q: How to replace the Crankshaft Position Sensor on 2009 GMC Savana 1500?
A: The Crankshaft Position Sensor replacement requires that you position the ignition and start switch to off or lock while shutting down all electrical loads to eliminate electrical sparks. Disconnect the negative Battery Cable. Lift the vehicle before removing the Starter assembly. The crankshaft position (CKP) sensor electrical connector needs removal so you can clean the surrounding area to keep engine debris outside. To replace the sensor first remove its retaining fastener followed by removing the ckp sensor itself. To install the ckp sensor follow this process: put sensor in position then install its retaining fastener before tightening it to 25 nm (18 lb ft). Reconnect the ckp sensor electrical connector before returning the Starter into position and lowering the vehicle and reconnecting the negative Battery Cable. Running the crankshaft position system variation learn procedure is required following both sensor removal and replacement.