How to replace the power brake booster on 2009 GMC Savana 3500?

Set park brake, block wheels. Support master cylinder aside. Disconnect booster inlet and outlet hoses, inspecting O-rings. Remove pushrod clip, stoplamp switch, booster nuts, booster and gasket. Install new gasket, booster and nuts, lubricate pedal pin, reconnect stoplamp switch, pushrod clip, hoses, master cylinder; bleed system.

OEM 2009 GMC Savana 3500 Brake Booster

Brake Power Booster

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Brake Booster found

View related parts
2009 GMC Savana 3500 Brake Booster Part Number: 19371364
$322.73 MSRP: $630.22
You Save: $307.49 (49%)
ADD TO CART
Product Specifications
- Other Name: Booster, Hydraulic Power Brake Booster; Hydro-Boost Assembly; Booster Assembly; Power Brake Booster
- Replaces: 25790711, 20774171, 20941664
- Item Weight: 14.40 Pounds
- Item Dimensions: 25.2 x 14.4 x 10.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 19371364
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2009 GMC Savana 3500 Submodels:
- Base, LS, LT | 8 Cyl 4.8 L FLEX, 8 Cyl 4.8 L GAS, 8 Cyl 6.0 L CNG, 8 Cyl 6.0 L FLEX, 8 Cyl 6.0 L GAS, 8 Cyl 6.6 L DIESEL

2009 GMC Savana 3500 Brake Booster

With a comprehensive array of OEM 2009 GMC Savana 3500 Brake Booster, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2009 GMC Savana 3500 Brake Booster are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2009 GMC Savana 3500 Brake Booster Parts and Q&A

Q: How to replace the power brake booster on 2009 GMC Savana 3500?
A: Set park brake, block wheels. Support master cylinder aside. Disconnect booster inlet and outlet hoses, inspecting O-rings. Remove pushrod clip, stoplamp switch, booster nuts, booster and gasket. Install new gasket, booster and nuts, lubricate pedal pin, reconnect stoplamp switch, pushrod clip, hoses, master cylinder; bleed system.