How to replace the ignition lock cylinder on 2009 GMC Yukon?

As a replacement to the ignition switch lock cylinder, one needs to disable the sir system first. Take out the steering column shroud. When the key is in the start position, unscrew an allen wrench and release the tab and slide away the ignition lock cylinder. Installation should be done correctly to prevent complications. Install the shroud back in and activate the sir system.

OEM 2009 GMC Yukon Ignition Lock Cylinder

Ignition Key Lock Cylinder

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Ignition Lock Cylinder found

View related parts
2009 GMC Yukon Ignition Lock Cylinder Part Number: 15794826
$92.55 MSRP: $126.71
You Save: $34.16 (27%)
ADD TO CART
Product Specifications
- Other Name: Cylinder Kit Ignition Lock; Lock Cylinder; Ignition Cylinder; Cylinder; Cylinder, Ignition Switch
- Replaces: 19120038, 25756079
- Item Weight: 0.50 Pounds
- Item Dimensions: 3.3 x 2.2 x 1.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15794826
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2009 GMC Yukon Submodels:
- Denali, Denali Hybrid, Hybrid, SLE, SLT | 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L FULL HYBRID EV-FLEX (FHEV), 8 Cyl 6.0 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS

2009 GMC Yukon Ignition Lock Cylinder

With a comprehensive array of OEM 2009 GMC Yukon Ignition Lock Cylinder, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2009 GMC Yukon Ignition Lock Cylinder are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2009 GMC Yukon Ignition Lock Cylinder Parts and Q&A

Q: How to replace the ignition lock cylinder on 2009 GMC Yukon?
A: As a replacement to the ignition switch lock cylinder, one needs to disable the sir system first. Take out the steering column shroud. When the key is in the start position, unscrew an allen wrench and release the tab and slide away the ignition lock cylinder. Installation should be done correctly to prevent complications. Install the shroud back in and activate the sir system.