OEM 2010 Chevrolet Aveo Crankshaft

2010 Chevrolet Aveo Parts Questions & Experts Answers

• Q: How to replace the crankshaft on 2010 Chevrolet Aveo?

  A: Replace the Crankshaft using the following procedure - check and confirm the sequence of the Crankshaft caps and bearings. Start by removing the pistons and connecting rods and follow by dismantling the Crankshaft cap bolts. Next, you will have to remove the Crankshaft caps with journal bearings and the Crankshaft. Detach the crank shaft rear oil seal from the housing and take it out. For install, coat and lube in the Crankshaft, then install the Crankshaft with bearings following the proper order. Mount the Crankshaft caps with journal bearings and tighten up to 50+50° nm (36.8+50° lb ft) on main Crankshaft cap bolts. Then add the Crankshaft rear oil seal to the housing and place the Crankshaft rear oil seal. Finally, put in the pistons and connecting rods again.