How to Replace a Power Steering Hose on 2010 Chevrolet Aveo?

The first step to perform Power Steering Pump hose and pipe replacements starts with draining power steering fluid from the reservoir. Detach the pressure line pipe by disconnecting it from the outlet connection on the Power Steering Pump. The air cleaner housing needs removal when changing power steering hoses so refer to proper engine type procedures for the 1.2, 1.4, 1.6, or 1.6 engine models. The next step of the replacement involves removing the pressure pipe retaining clamp bolt by the engine cylinder head and the return pipe retaining clamp nuts (1, 2) at the left side body panel. Detach both the pressure and return inlet line pipes from the steering gear and isolate the return line hose from the reservoir. Export both the Power Steering Pump pressure line and return line from the vehicle. You should put Power Steering Pump pressure line and return line into the vehicle before connecting the return line hose to the reservoir. The fastener safety guidelines must be kept in mind during execution. Tighten the steering gear fitting with a torque of 28 nm (21 lb ft) when attaching pressure and return line inlet pipes to the gear. Position and secure the pressure pipe retaining clamp bolt with a torque of 25 nm (18 lb ft), follow with tightening return pipe retaining clamp nuts (1, 2) to 8 nm (70 lb in). Secure the pressure line pipe to its outlet connection on the Power Steering Pump while tightly screwing the union nut to 28 nm (21 lb ft). You should reattach the air cleaner housing based on engine type guidelines when you put the housing back. Afterward empty power steering fluid from reservoir then bleed the power steering system while filling the reservoir.

OEM 2010 Chevrolet Aveo Power Steering Hose

Power Steering Pressure Hose

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Power Steering Hoses found

View related parts
2010 Chevrolet Aveo Oil Pipe
Part Number: 93742573
$20.14 MSRP: $29.08
You Save: $8.94 (31%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pipe, Power Steering Gear Inlet; Power Steering Hose; Pipe; Pipe, Steering Gear Oil Pressure
- Item Weight: 0.50 Pounds
- Item Dimensions: 15.3 x 4.4 x 2.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 93742573
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2010 Chevrolet Aveo Submodels:
- Base, LS, LT, Special Value | 4 Cyl 1.6 L GAS
View related parts
2010 Chevrolet Aveo Oil Pipe
Part Number: 93742571
$18.76 MSRP: $29.38
You Save: $10.62 (37%)
Product Specifications
- Other Name: Pipe, Power Steering Gear Inlet; Power Steering Hose; Pipe; Pipe, Steering Gear Oil Pressure
- Item Weight: 0.40 Pounds
- Item Dimensions: 10.6 x 4.7 x 2.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 93742571
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2010 Chevrolet Aveo Submodels:
- Base, LS, LT, Special Value | 4 Cyl 1.6 L GAS
View related parts
2010 Chevrolet Aveo Power Steering Return Hose
Part Number: 95047259
Product Specifications
- Other Name: Pipe Assembly, Power Steering Gear Outlet; Power Steering Hose; Suction Tube; Power Steering Suction Hose; Pipe, Steering Gear Oil Return
- Replaces: 95954609, 95949980, 96802850, 95214398
- Item Weight: 1.50 Pounds
- Item Dimensions: 33.4 x 16.8 x 6.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 95047259
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2010 Chevrolet Aveo Submodels:
- LS, LT | 4 Cyl 1.6 L GAS
View related parts
2010 Chevrolet Aveo Power Steering Pressure Hose
Part Number: 95039910
Product Specifications
- Other Name: Pipe Assembly, Power Steering Pump Inlet; Power Steering Hose; Pressure Hose; Pipe, Steering Gear Oil Return
- Replaces: 96943725
- Item Weight: 1.00 Pounds
- Item Dimensions: 28.0 x 3.9 x 1.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 95039910
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2010 Chevrolet Aveo Submodels:
- LS, LT | 4 Cyl 1.6 L GAS
View related parts
2010 Chevrolet Aveo Power Steering Return Hose
Part Number: 95961434
Product Specifications
- Other Name: Hose, Steering Gear Oil Return; Power Steering Hose; Power Steering Suction Hose; Return Tube
- Replaces: 96535360, 96987199
- Item Weight: 1.20 Pounds
- Item Dimensions: 18.9 x 7.8 x 4.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 95961434
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2010 Chevrolet Aveo Submodels:
- Base, LS, LT, Special Value | 4 Cyl 1.6 L GAS
View related parts
2010 Chevrolet Aveo Inlet Pipe
Part Number: 96498797
Product Specifications
- Other Name: Pipe, Steering Gear Oil Return; Power Steering Hose; Outlet Pipe
- Item Weight: 1.00 Pounds
- Item Dimensions: 15.4 x 4.4 x 0.9 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 96498797
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2010 Chevrolet Aveo Submodels:
- Base, LS, LT, Special Value | 4 Cyl 1.6 L GAS

2010 Chevrolet Aveo Power Steering Hose

With a comprehensive array of OEM 2010 Chevrolet Aveo Power Steering Hose, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2010 Chevrolet Aveo Power Steering Hose are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2010 Chevrolet Aveo Power Steering Hose Parts Questions & Experts Answers

Q: How to Replace a Power Steering Hose on 2010 Chevrolet Aveo?
A: The first step to perform Power Steering Pump hose and pipe replacements starts with draining power steering fluid from the reservoir. Detach the pressure line pipe by disconnecting it from the outlet connection on the Power Steering Pump. The air cleaner housing needs removal when changing power steering hoses so refer to proper engine type procedures for the 1.2, 1.4, 1.6, or 1.6 engine models. The next step of the replacement involves removing the pressure pipe retaining clamp bolt by the engine cylinder head and the return pipe retaining clamp nuts (1, 2) at the left side body panel. Detach both the pressure and return inlet line pipes from the steering gear and isolate the return line hose from the reservoir. Export both the Power Steering Pump pressure line and return line from the vehicle. You should put Power Steering Pump pressure line and return line into the vehicle before connecting the return line hose to the reservoir. The fastener safety guidelines must be kept in mind during execution. Tighten the steering gear fitting with a torque of 28 nm (21 lb ft) when attaching pressure and return line inlet pipes to the gear. Position and secure the pressure pipe retaining clamp bolt with a torque of 25 nm (18 lb ft), follow with tightening return pipe retaining clamp nuts (1, 2) to 8 nm (70 lb in). Secure the pressure line pipe to its outlet connection on the Power Steering Pump while tightly screwing the union nut to 28 nm (21 lb ft). You should reattach the air cleaner housing based on engine type guidelines when you put the housing back. Afterward empty power steering fluid from reservoir then bleed the power steering system while filling the reservoir.