OEM 2010 Chevrolet Aveo Tie Rod

2010 Chevrolet Aveo Parts Questions & Experts Answers

• Q: How to replace the outer tie rod in the steering linkage on 2010 Chevrolet Aveo?

  A: The km-507-c ball joint remover serves to remove the outer Tie Rod hex nut from the steering linkage before disconnecting the outer Tie Rod segment from the knuckle. Secure position marking of the Tie Rod lock nut helps with alignment requirements during eventual installation. Remove the outer Tie Rod by first loosening its pair of lock nuts. The installation procedure needs you to observe fastener safety guidelines. Fasten the outer Tie Rod with its lock nuts until they reach 54 nm (40 lb ft) torque. After fixing the outer Tie Rod using the hex nut you must apply a torque of 45 nm or 33 lb ft. Safety checks should follow the installation phase together with basic alignment tests and straight-ahead examinations of the vehicle. You should measure wheel alignment before possibly adjusting the front toe when needed.