OEM 2010 Chevrolet Camaro ABS Control Module

2010 Chevrolet Camaro Parts Questions & Experts Answers

• Q: How to replace the ABS Control Module on 2010 Chevrolet Camaro?

  A: Start the replacement of the ABS Control Module by turning the Ignition Switch off because it prevents damage to equipment. You must clean the surrounding area of the ABS Control Module while removing all contamination before disconnecting the ABS Control Module electrical connector. The ABS Control Module bolts must be taken out using gentle force while avoiding contact with the ABS Control Module. Afterward, pull the ABS Control Module directly away from the brake pressure modulator valve (BPMV) without applying forceful pressure. Before installation the technicians should clean both ABS Control Module and bpmv sealing surfaces with denatured alcohol and allow them to dry completely. You should mount the ABS Control Module onto the bpmv while applying recommended fastener techniques during the process. The ABS Control Module bolts need tightening in a cross pattern to 3 nm (27 lb in) before reattachment of the ABS Control Module electrical connector. The completion depends on programming the ABS Control Module and running the diagnostic system check - vehicle.