How to replace the exhaust heat shield on 2010 Chevrolet Cobalt?

The Exhaust Heat Shield replacement requires removing the Catalytic Converter which can be either an lnf model or lap model. A non-petroleum-based lubricant should be applied to the insulators before pulling them out from both the resonator pipe and Muffler. Lower the Muffler and the resonator pipe with their suitable support stand to gain clearance. The waste heat shield requires removal by drilling out four securing rivets followed by the removal of the heat shield nut and finally extracting the shield. Set the heat shield under the body before installing the heat shield nut which needs to reach 10 nm (89 lb in) torque. Place four brand-new heat shield rivets before using non-petroleum-based lubricant on insulators with installation assistance. Elevate the resonator pipe and Muffler while attaching them to the insulators. Complete the installation by placing the Catalytic Converter either as a lnf or lap model.

OEM 2010 Chevrolet Cobalt Exhaust Heat Shield

Heat Shield

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Exhaust Heat Shields found

View related parts
2010 Chevrolet Cobalt Heat Shield, Upper
Part Number: 12587497
Product Specifications
- Other Name: Shield Assembly-Exhaust Manifold Upper Heat; Exhaust Heat Shield; Exhaust Manifold Heat Shield; Shield, Exhaust Manifold
- Position: Upper
- Replaces: 90537953
- Item Weight: 1.60 Pounds
- Item Dimensions: 14.6 x 8.4 x 6.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 12587497
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2010 Chevrolet Cobalt Submodels:
- Base, LS, LT, LTZ, Sport, SS | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS
View related parts
2010 Chevrolet Cobalt Heat Shield
Part Number: 25862173
Product Specifications
- Other Name: Shield Assembly-Exhaust Heat; Exhaust Heat Shield; Shield, Exhaust Manifold
- Replaces: 22708722, 15923292
- Item Weight: 5.90 Pounds
- Item Dimensions: 62.9 x 14.6 x 9.2 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 25862173
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2010 Chevrolet Cobalt Submodels:
- Base, LS, LT, LTZ, Sport, SS | 4 Cyl 2.0 L GAS, 4 Cyl 2.2 L GAS, 4 Cyl 2.4 L GAS
View related parts
2010 Chevrolet Cobalt Heat Shield, Upper
Part Number: 12612286
Product Specifications
- Other Name: Shield Assembly-Exhaust Manifold Upper Heat; Exhaust Heat Shield; Shield, Exhaust Manifold
- Position: Upper
- Replaces: 12603815
- Item Weight: 1.50 Pounds
- Item Dimensions: 19.4 x 8.1 x 4.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 12612286
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2010 Chevrolet Cobalt Submodels:
- SS | 4 Cyl 2.0 L GAS
View related parts
2010 Chevrolet Cobalt Heat Shield, Upper
Part Number: 12603793
Product Specifications
- Other Name: Shield Assembly-Exhaust Manifold Upper Heat; Exhaust Heat Shield; Shield, Exhaust Manifold
- Position: Upper
- Item Weight: 1.30 Pounds
- Item Dimensions: 14.6 x 8.4 x 4.6 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 12603793
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2010 Chevrolet Cobalt Submodels:
- Base, LS, LT | 4 Cyl 2.2 L GAS

2010 Chevrolet Cobalt Exhaust Heat Shield

With a comprehensive array of OEM 2010 Chevrolet Cobalt Exhaust Heat Shield, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2010 Chevrolet Cobalt Exhaust Heat Shield are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2010 Chevrolet Cobalt Exhaust Heat Shield Parts Questions & Experts Answers

Q: How to replace the exhaust heat shield on 2010 Chevrolet Cobalt?
A: The Exhaust Heat Shield replacement requires removing the Catalytic Converter which can be either an lnf model or lap model. A non-petroleum-based lubricant should be applied to the insulators before pulling them out from both the resonator pipe and Muffler. Lower the Muffler and the resonator pipe with their suitable support stand to gain clearance. The waste heat shield requires removal by drilling out four securing rivets followed by the removal of the heat shield nut and finally extracting the shield. Set the heat shield under the body before installing the heat shield nut which needs to reach 10 nm (89 lb in) torque. Place four brand-new heat shield rivets before using non-petroleum-based lubricant on insulators with installation assistance. Elevate the resonator pipe and Muffler while attaching them to the insulators. Complete the installation by placing the Catalytic Converter either as a lnf or lap model.