OEM 2010 Chevrolet Corvette Brake Caliper Bracket

Caliper Bracket
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Brake Caliper Brackets found

  • 2010 Chevy Corvette Brake Caliper Bracket - 88964166
    2010 Chevy Corvette Brake Caliper Bracket Diagram - 88964166
    View related parts
    Product Specifications
    • Other Name: Bracket, Front Brake Caliper; Brake Caliper Bracket; Bracket, Wheel Brake Cylinder/Caliper
    • Position: Front
    • Item Weight: 3.40 Pounds
    • Item Dimensions: 10.0 x 9.9 x 4.6 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 88964166
    • Warranty: This genuine part is guaranteed by GM's factory warranty.
    More Info
    Fits the following 2010 Chevrolet Corvette Submodels:
    • Base | 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L GAS
  • 2010 Chevy Corvette Brake Caliper Bracket - 88955518
    2010 Chevy Corvette Brake Caliper Bracket Diagram - 88955518
    View related parts
    Product Specifications
    • Other Name: Bracket, Wheel Brake Cylinder/Caliper; Brake Caliper Bracket
    • Position: Front
    • Item Weight: 5.50 Pounds
    • Item Dimensions: 9.5 x 9.8 x 4.2 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • Require Quantity: 2
    • SKU: 88955518
    • Warranty: This genuine part is guaranteed by GM's factory warranty.
    More Info
    Fits the following 2010 Chevrolet Corvette Submodels:
    • 427, Base | 8 Cyl 6.0 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 7.0 L GAS

2010 Chevrolet Corvette Brake Caliper Bracket

With a comprehensive array of OEM 2010 Chevrolet Corvette Brake Caliper Bracket, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2010 Chevrolet Corvette Brake Caliper Bracket are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2010 Chevrolet Corvette Brake Caliper Bracket Parts Questions & Experts Answers

  • Q: How to remove and replace the rear brake caliper bracket on 2010 Chevrolet Corvette?
    A: Support the brake caliper while holding it with heavy mechanics wire after removing it from its mounting bracket and maintain connection between the hydraulic brake flexible hose to avoid damage and leaks. Begin by extracting the brake pads from the Brake Caliper Bracket then extract the Brake Pad retainers. You need new brake caliper mounting bracket bolts each time you remove them or detect any looseness because you cannot reuse them. The Brake Caliper Bracket requires bolt removal followed by discarding them before taking out the Brake Caliper Bracket. Check the brake mounting hardware while examining the Brake Caliper Bracket for damage and cracks then replace it when needed. The installation of a new Brake Caliper Bracket to the suspension knuckle requires the removal of all adhesive residue from both components. Install the 2 new brake caliper mounting bracket bolts along with washers that feature thread-adhesive application before tightening them to 175 nm (129 lb ft). Use high-temperature silicone lubricant to grease brake caliper pin bolts while you install Brake Pad retainers along with brake pads to the Brake Caliper Bracket . Finally, install the brake caliper.

Related 2010 Chevrolet Corvette Parts