OEM 2010 Chevrolet Corvette Throttle Body

2010 Chevrolet Corvette Throttle Body Parts Questions & Experts Answers

• Q: How to replace the throttle body assembly without damaging the electronic throttle control components on 2010 Chevrolet Corvette?

  A: The electronic throttle control components require sensitive handling for protection against damage because cleaning agents must not be used and the area should remain clean. Record the 8-digit part identification number stamped on the Throttle Body casting before moving forward for future identification. Service of the device requires closure or plugging of all access points to stop contamination from entering. Start by disassembling the air cleaner assembly followed by a removal of the air control valve electrical connector. You must remove the 4 Throttle Body bolts to extract both the Throttle Body assembly and its gasket discard the old gasket since it must be replaced. After installing the new Throttle Body Gasket and assembly, utilize a torque wrench to tighten all 4 Throttle Body bolts to 10 nm (89 lb in). After ensuring proper placement of the air control valve electrical connector along with its protective seal free from damage you should reconnect the electrical connector. The throttle learn procedure follows before reinstalling the air cleaner assembly.