How to replace the intermediate steering column seal on 2010 GMC Savana 1500?

In order to change the steering shaft interim seal, must ensure the steering wheel is straightened to avoid breaking the SIR system. Without turning the wheel, disconnect steering column and steering shaft. In case the SIR coil is not centered, the centering procedure is to be used. Fit the seal and bearing and take out the securing tool.

OEM 2010 GMC Savana 1500 Steering Column Seal

Steering Column to Firewall Seal

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Steering Column Seal found

View related parts
2010 GMC Savana 1500 Lower Seal Part Number: 15898223
$17.03 MSRP: $31.98
You Save: $14.95 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Seal, Steering Shaft U Joint; Seal, Steering Column
- Position: Upper
- Item Weight: 0.80 Pounds
- Item Dimensions: 8.7 x 7.0 x 7.4 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 15898223
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2010 GMC Savana 1500 Submodels:
- Base, LS, LT | 6 Cyl 4.3 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS

2010 GMC Savana 1500 Steering Column Seal

With a comprehensive array of OEM 2010 GMC Savana 1500 Steering Column Seal, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2010 GMC Savana 1500 Steering Column Seal are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2010 GMC Savana 1500 Steering Column Seal Parts and Q&A

Q: How to replace the intermediate steering column seal on 2010 GMC Savana 1500?
A: In order to change the steering shaft interim seal, must ensure the steering wheel is straightened to avoid breaking the SIR system. Without turning the wheel, disconnect steering column and steering shaft. In case the SIR coil is not centered, the centering procedure is to be used. Fit the seal and bearing and take out the securing tool.