How to replace the ignition lock cylinder on 2010 GMC Terrain?

In order to change the ignition switch lock cylinder, undo the battery negative cable, and take off the steering column shroud. Put the key in the ignition switch lock cylinder and position it to RUN, and press the retainer with a tool. Detach and replace the new cylinder and re-connect the battery.

OEM 2010 GMC Terrain Ignition Lock Cylinder

Ignition Key Lock Cylinder

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

1 Ignition Lock Cylinder found

View related parts
2010 GMC Terrain Ignition Lock Cylinder Part Number: 20766607
$32.35 MSRP: $60.76
You Save: $28.41 (47%)
ADD TO CART
Product Specifications
- Other Name: Cylinder Kit, Ignition Lock (Uncoded); Lock Cylinder; Ignition Cylinder; Cylinder Kit, Ignition Switch
- Item Weight: 0.70 Pounds
- Item Dimensions: 9.7 x 1.7 x 9.8 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 20766607
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2010 GMC Terrain Submodels:
- Denali, SL, SLE, SLT | 4 Cyl 2.4 L FLEX, 4 Cyl 2.4 L GAS, 6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS

2010 GMC Terrain Ignition Lock Cylinder

With a comprehensive array of OEM 2010 GMC Terrain Ignition Lock Cylinder, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2010 GMC Terrain Ignition Lock Cylinder are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2010 GMC Terrain Ignition Lock Cylinder Parts and Q&A

Q: How to replace the ignition lock cylinder on 2010 GMC Terrain?
A: In order to change the ignition switch lock cylinder, undo the battery negative cable, and take off the steering column shroud. Put the key in the ignition switch lock cylinder and position it to RUN, and press the retainer with a tool. Detach and replace the new cylinder and re-connect the battery.