OEM 2010 GMC Yukon Steering Knuckle

Front Steering Knuckle
  • Select Vehicle by Model
  • Select Vehicle by VIN
Select Vehicle by Model
Make
Model
Year
or
Select Vehicle by VIN
For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Steering Knuckles found

  • 2010 GMC Yukon Steering Knuckle Diagram - 22912208
    View related parts

    2010 GMC Yukon Knuckle, Driver Side Part Number: 22912208

    $306.71 MSRP: $490.06
    You Save: $183.35 (38%)
    Ships in 1-2 Business Days
    ADD TO CART
    Product Specifications
    • Other Name: Knuckle, Steering
    • Position: Driver Side
    • Replaces: 15942236, 15125944
    • Item Weight: 19.30 Pounds
    • Item Dimensions: 14.4 x 14.4 x 8.2 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 22912208
    • Warranty: This genuine part is guaranteed by GM's factory warranty.
    More Info
    Fits the following 2010 GMC Yukon Submodels:
    • Denali, Denali Hybrid, Hybrid, SLE, SLT | 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L FULL HYBRID EV-FLEX (FHEV), 8 Cyl 6.0 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
  • 2010 GMC Yukon Steering Knuckle Diagram - 22912209
    View related parts

    2010 GMC Yukon Knuckle, Passenger Side Part Number: 22912209

    $282.59 MSRP: $458.62
    You Save: $176.03 (39%)
    Ships in 1-2 Business Days
    ADD TO CART
    Product Specifications
    • Other Name: Knuckle, Steering
    • Position: Passenger Side
    • Replaces: 15125945, 15942237
    • Item Weight: 17.50 Pounds
    • Item Dimensions: 6.5 x 13.4 x 13.3 inches
    • Condition: New
    • Fitment Type: Direct Replacement
    • SKU: 22912209
    • Warranty: This genuine part is guaranteed by GM's factory warranty.
    More Info
    Fits the following 2010 GMC Yukon Submodels:
    • Denali, Denali Hybrid, Hybrid, SLE, SLT | 8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L FULL HYBRID EV-FLEX (FHEV), 8 Cyl 6.0 L FULL HYBRID EV-GAS (FHEV), 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS

2010 GMC Yukon Steering Knuckle

With a comprehensive array of OEM 2010 GMC Yukon Steering Knuckle, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2010 GMC Yukon Steering Knuckle are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2010 GMC Yukon Steering Knuckle Parts and Q&A

  • Q: How to replace the steering knuckle on a 1500 on 2010 GMC Yukon?
    A: A driver must elevate their vehicle for maintenance before removing the wheel and tire to replace a Steering Knuckle in a 1500. The wheel drive shaft must be taken out of the vehicle when it is present in models 1500. Follow the procedure to eliminate the Wheel Bearing and hub assembly (2500). First disconnect the outer tie rod from the knuckle before unfastening the upper Control Arm together with the lower Control Arm from the knuckle. When servicing the lower Ball Joint exclude disconnecting the brake hose as well as all electrical components but keep the knuckle assembly secured to the side during knuckle removal from the vehicle. Ball joints must be installed at their proper positions beginning with the lower joint into the knuckle then the upper one. You should install the outer tie rod onto the knuckle before putting on the Wheel Bearing with hub assembly for 2500 models. Proceed with wheel drive shaft installation (1500) after which add the tire along with the wheel. Complete the installation by taking away the support system and dropping the vehicle before conducting a wheel alignment test.

Related 2010 GMC Yukon Parts