How to replace the camshaft on the right side on Buick Enclave?

The right side Camshaft replacement requires two essential tools consisting of en-48313 Timing Chain retention tool (EN-48313) and en 46111 Crankshaft rotation socket (EN 46111). Start the procedure by taking out the lower Intake Manifold then proceeding with removal of the Camshaft cover together with Camshaft sensors and intake Camshaft position actuator solenoid. First obtain the en 46111 Crankshaft rotation socket (EN 46111) to rotate the Crankshaft while following the instructions until both camshafts are in a neutral position with the Camshaft flats parallel to the Camshaft cover rail. Loosen the Camshaft position actuator bolt using an open-end wrench applied to the hex at the Camshaft. Insert the en-48313 between the Camshaft actuators with its top line positioned next to the cylinder head after retracting its legs through unscrewing the en-48313. Turn the t-shaped handle of the en-48313 clockwise to expand its legs partially thus the feet will reach the Timing Chain until they securely enter link pockets to stop the chain from slipping. Secure the en-48313 with hand torque then fasten the hex with an open-end wrench. To attain proper loosening of the chain path the operator should pivot Camshaft components together while writing the marks for successful installation alignment. Begin by removing the Camshaft position actuator bolt after which you can extract the Camshaft bearing caps along with the Camshaft itself. After proper alignment of marks on Camshaft position actuators with the Timing Chain you can install the Camshaft actuators onto the camshafts and assemble bearing caps with camshafts. Put on the en-48313 before installing the Crankshaft balancer while applying an open-end wrench to both Camshaft hexes to block their rotation. The order for final installation includes Camshaft position actuators then intake Camshaft position actuator solenoid and Camshaft sensors and Camshaft cover and lower Intake Manifold.

OEM Buick Enclave Camshaft

Cam

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

13 Camshafts found

View related parts
Buick Enclave Camshaft Part Number: 12625984
$227.64 MSRP: $309.00
You Save: $81.36 (27%)
ADD TO CART
Product Specifications
- Other Name: Camshaft, Engine
- Replaced by: 19433783
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2009-2011 Buick Enclave | CX, CXL | 6 Cyl 3.6 L GAS
View related parts
Buick Enclave Camshaft Part Number: 12625988
$258.67 MSRP: $406.90
You Save: $148.23 (37%)
ADD TO CART
Product Specifications
- Other Name: Camshaft, Engine
- Replaced by: 19431714
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2008-2011 Buick Enclave | CX, CXL | 6 Cyl 3.6 L GAS
View related parts
Buick Enclave Camshaft Part Number: 12638172
$79.23 MSRP: $124.09
You Save: $44.86 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Camshaft, Engine
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2011-2017 Buick Enclave | Base, Convenience, CX, CXL, Leather, Premium | 6 Cyl 3.6 L GAS
View related parts
Buick Enclave Camshaft Part Number: 12638173
$108.62 MSRP: $148.73
You Save: $40.11 (27%)
ADD TO CART
Product Specifications
- Other Name: Camshaft, Engine
- Replaced by: 12638406
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2011-2017 Buick Enclave | Base, Convenience, CX, CXL, Leather, Premium | 6 Cyl 3.6 L GAS
View related parts
Buick Enclave Camshaft Part Number: 19431713
$268.36 MSRP: $422.26
You Save: $153.90 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Camshaft Assembly, Intake; Camshaft, Engine
- Replaces: 12603535, 12609252, 12625989, 19420582, 12603545, 12604374, 12632195, 19420031
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2008-2011 Buick Enclave | CX, CXL | 6 Cyl 3.6 L GAS
View related parts
Buick Enclave Camshaft Part Number: 12666075
$87.96 MSRP: $137.78
You Save: $49.82 (37%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Camshaft Assembly-Intake; Camshaft, Engine
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2018-2021 Buick Enclave | Avenir, Base, Essence, Preferred, Premium | 6 Cyl 3.6 L GAS
View related parts
Buick Enclave Camshaft Part Number: 12666074
$96.29 MSRP: $150.81
You Save: $54.52 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Camshaft, Engine
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2018-2021 Buick Enclave | Avenir, Base, Essence, Preferred, Premium | 6 Cyl 3.6 L GAS
View related parts
Buick Enclave Camshaft Part Number: 12666073
$66.76 MSRP: $104.55
You Save: $37.79 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Camshaft Assembly-Intake; Camshaft, Engine
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2018-2021 Buick Enclave | Avenir, Base, Essence, Preferred, Premium | 6 Cyl 3.6 L GAS
View related parts
Buick Enclave Camshaft Part Number: 12666072
$91.07 MSRP: $142.65
You Save: $51.58 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Camshaft, Engine
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2018-2021 Buick Enclave | Avenir, Base, Essence, Preferred, Premium | 6 Cyl 3.6 L GAS
View related parts
Buick Enclave Camshaft, Driver Side Part Number: 12638399
$94.44 MSRP: $147.98
You Save: $53.54 (37%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Camshaft Assembly-Exhaust (Left-Hand); Camshaft, Engine
- Position: Driver Side
- Replaces: 12638171
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2011-2017 Buick Enclave | Base, Convenience, CX, CXL, Leather, Premium | 6 Cyl 3.6 L GAS
View related parts
Buick Enclave Camshaft Part Number: 12625991
$13.70 MSRP: $21.46
You Save: $7.76 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Camshaft, Engine
- Replaces: 12583314, 12620449, 12609249
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2008 Buick Enclave | CX, CXL | 6 Cyl 3.6 L GAS
View related parts
Buick Enclave Camshaft Part Number: 12625986
$28.90 MSRP: $45.26
You Save: $16.36 (37%)
Product Specifications
- Other Name: Camshaft Assembly-Intake; Camshaft, Engine
- Replaces: 12632193, 12604377, 12603544, 12609250
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2008-2011 Buick Enclave | CX, CXL | 6 Cyl 3.6 L GAS
View related parts
Buick Enclave Camshaft Part Number: 12632274
Product Specifications
- Other Name: Camshaft, Engine
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2011-2017 Buick Enclave | Base, Convenience, CX, CXL, Leather, Premium | 6 Cyl 3.6 L GAS

Buick Enclave Camshaft

Want to cut long-term maintenance and repair costs? Choose OEM Camshaft. Those parts deliver top durability you can trust. On our site, you'll find a huge catalog of genuine Buick Enclave parts. Prices are unbeatable, so you can keep more in your pocket. Every OEM Buick Enclave Camshaft includes a manufacturer's warranty. You can also get an easy return policy that keeps buying risk free. Fast delivery, get your car on the road quickly. It's simple to search, compare, and order. Stop guessing about quality or fit. Order today and save with parts that last.

In Buick enclave automobiles, Camshaft professionally regulates the operations of the intake as well as the exhaust valves with regard to the burning system of the cars. Camshafts in Enclave models include the Over Head Valve (OHV), Single Over Head Cam (SOHC), and the Double Over Head Cam (DOHC) to enhance on engine performance. Some of the parameters that are easily variable to arrive at the target include lift, duration, and lobe separation angle, where the camshaft proves useful in the manipulation of the output power and RPM range. For further improved performance of an automobile engine, an enhanced performance camshaft can be installed to meet particular objectives like, more miles per gallon or towing capacity. In general, camshaft plays a critical role in the enhancement of the Buick enclave engine performance.

Buick Enclave Camshaft Parts Questions & Experts Answers

Camshaft
12625988
Q: How to replace the camshaft on the right side on Buick Enclave?
A:
The right side Camshaft replacement requires two essential tools consisting of en-48313 Timing Chain retention tool (EN-48313) and en 46111 Crankshaft rotation socket (EN 46111). Start the procedure by taking out the lower Intake Manifold then proceeding with removal of the Camshaft cover together with Camshaft sensors and intake Camshaft position actuator solenoid. First obtain the en 46111 Crankshaft rotation socket (EN 46111) to rotate the Crankshaft while following the instructions until both camshafts are in a neutral position with the Camshaft flats parallel to the Camshaft cover rail. Loosen the Camshaft position actuator bolt using an open-end wrench applied to the hex at the Camshaft. Insert the en-48313 between the Camshaft actuators with its top line positioned next to the cylinder head after retracting its legs through unscrewing the en-48313. Turn the t-shaped handle of the en-48313 clockwise to expand its legs partially thus the feet will reach the Timing Chain until they securely enter link pockets to stop the chain from slipping. Secure the en-48313 with hand torque then fasten the hex with an open-end wrench. To attain proper loosening of the chain path the operator should pivot Camshaft components together while writing the marks for successful installation alignment. Begin by removing the Camshaft position actuator bolt after which you can extract the Camshaft bearing caps along with the Camshaft itself. After proper alignment of marks on Camshaft position actuators with the Timing Chain you can install the Camshaft actuators onto the camshafts and assemble bearing caps with camshafts. Put on the en-48313 before installing the Crankshaft balancer while applying an open-end wrench to both Camshaft hexes to block their rotation. The order for final installation includes Camshaft position actuators then intake Camshaft position actuator solenoid and Camshaft sensors and Camshaft cover and lower Intake Manifold.