Make sure this part fits

GM 19431713
Camshaft

2007-2011 GM

Customer Questions & Expert Answers (20)
GM 19431713 Camshaft
  • Part Description
    Camshaft Assembly, Intake
  • Replaces
    12603535, 12609252, 12625989, 19420582, 12603545, 12604374, 12632195, 19420031
  • Manufacturer
    General Motors
Make sure this part fits
$263.10 MSRP: $413.98
You Save: $150.88 (37%)
Ships in 1-3 Business Days
1
ADD TO CART
  • Related Parts
  • Product Specifications
  • Vehicle Fitment
  • Customer Questions & Expert Answers
  • Product Specifications

    BrandGenuine GM
    Manufacturer Part Number19431713
    Part DescriptionCamshaft Assembly, Intake
    Other NamesCamshaft, Engine
    Item Dimensions30.6 x 2.1 x 2.1 inches
    Item Weight5.40 Pounds
    ConditionNew
    Replaces12603535, 12609252, 12625989, 19420582, 12603545, 12604374, 12632195, 19420031
    ManufacturerGeneral Motors
    SKU19431713
    WarrantyThis genuine GM part is guaranteed by GM's factory warranty.
    Shipping & ReturnShipping Policy Return Policy
    Warning: California's Proposition 65
  • Vehicle Fitment

    Year Make Model Trim Engine
    2008-2011 Buick EnclaveCX, CXL6 Cyl 3.6 L GAS
    2010-2011, 2008 Buick LaCrosseCX, CXL, CXS6 Cyl 3.0 L GAS, 6 Cyl 3.6 L GAS
    2008-2011 Cadillac CTSBase, Luxury, Performance, Premium6 Cyl 3.0 L GAS, 6 Cyl 3.6 L GAS
    2007-2011 Cadillac SRXBase, Luxury, Performance, Premium6 Cyl 3.0 L GAS, 6 Cyl 3.6 L GAS
    2008-2011 Cadillac STSBase, Platinum6 Cyl 3.6 L GAS
    2010-2011 Chevrolet CamaroLS, LT6 Cyl 3.6 L GAS
    2008-2011 Chevrolet EquinoxLT, LTZ, Sport6 Cyl 3.0 L FLEX, 6 Cyl 3.0 L GAS, 6 Cyl 3.6 L GAS
    2008-2011 Chevrolet MalibuLT, LTZ6 Cyl 3.6 L GAS
    2009-2011 Chevrolet TraverseLS, LT, LTZ6 Cyl 3.6 L GAS
    2007-2011 GMC AcadiaDenali, SL, SLE, SLT6 Cyl 3.6 L GAS
    View More
  • Customer Questions & Expert Answers

    Q:
    Is this 19431713 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 19431713 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    How do you secure the EN-48313 tool for the 2008 Buick LaCrosse? Posted by Customer
    A:
    Partially expand the legs of the EN-48313 by turning the T-shaped handle clockwise until the feet contact the timing chain, ensuring the foot is engaged in a link pocket to prevent slippage. Hand tighten the EN-48313 and use an open-end wrench on its hex to secure it.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Camshaft
    Q:
    How do you prevent rotation during the installation of the camshaft position actuators for the 2008 Buick Enclave? Posted by Customer
    A:
    Use an open-end wrench at the camshaft hex.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Camshaft
    Q:
    How should the camshafts be installed for the 2009 Buick Enclave? Posted by Customer
    A:
    Align the marks on the camshaft position actuator and timing chain, then locate the camshafts to the cylinder head and assemble the camshaft actuators.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Camshaft
    Q:
    How do you prevent the camshaft from rotating while loosening the actuator bolt for the 2009 Cadillac CTS? Posted by Customer
    A:
    Use an open-end wrench at the camshaft hex.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Camshaft
    Q:
    What components need to be removed after creating slack in the chain for the 2008 Cadillac CTS? Posted by Customer
    A:
    The camshaft position actuator bolt, camshaft bearing caps, and the camshaft.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Camshaft
    Q:
    What should be removed after the intake manifolds for the 2008 Cadillac SRX? Posted by Customer
    A:
    Take off the camshaft cover and the camshaft sensors.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Camshaft
    Q:
    What should be done after securing the EN-48313 for the 2009 Cadillac SRX? Posted by Customer
    A:
    Rotate the camshafts towards each other to create slack in the chain, confirming the EN-48313 is properly installed.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Camshaft
    Q:
    What are the final steps in the process for the 2008 Cadillac STS? Posted by Customer
    A:
    Reinstall the intake camshaft position actuator solenoid, camshaft sensors, camshaft cover, and the upper intake manifold with the lower intake manifold.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Camshaft
    Q:
    What is the first step to replace the camshaft on the right side (LP1, LY7) (3.6L) for the 2009 Cadillac STS? Posted by Customer
    A:
    First, remove the upper intake manifold along with the lower intake manifold, then take off the camshaft cover.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Camshaft
    Q:
    How do you prevent the camshaft from rotating while loosening the bolt for the 2010 Chevrolet Camaro? Posted by Customer
    A:
    Use an open-end wrench at the camshaft hex to prevent rotation and loosen the camshaft position actuator bolt.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Camshaft
    Q:
    What should be done while installing and tightening the camshaft position actuators for the 2010 Chevrolet Camaro? Posted by Customer
    A:
    Use an open-end wrench at the camshaft hex to prevent rotation.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Camshaft
    Q:
    What is the procedure for installing the camshaft bearing caps for the 2010 Chevrolet Equinox? Posted by Customer
    A:
    Install the camshaft bearing caps and hand tighten the cap bolts, taking care to tighten the bearing cap bolts in increments of 3 turns until seated, reaching a final torque of 10 Nm (89 lb in).
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Camshaft
    Q:
    How should the bearing cap bolts be removed for the 2008 Chevrolet Malibu? Posted by Customer
    A:
    Carefully remove each bolt on the bearing caps one turn at a time to relieve spring tension on the camshaft, then mark the bearing caps for proper reinstallation.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Camshaft
    Q:
    How should the roller followers be positioned for the 2008 Chevrolet Malibu? Posted by Customer
    A:
    Position the roller followers on the valve stem tips and lash adjusters, applying the same lubricant.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Camshaft
    Q:
    What is the final step in the process for the 2007 GMC Acadia? Posted by Customer
    A:
    Install and tighten the camshaft position actuators, followed by the intake camshaft position actuator solenoid, camshaft sensors, camshaft cover, and lower intake manifold.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Camshaft
    Q:
    What is the next step after locating the camshafts to the cylinder head for the 2007 GMC Acadia? Posted by Customer
    A:
    Assemble the camshaft actuators, then install the camshafts and camshaft bearing caps.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Camshaft
    Q:
    How should the camshaft be installed for the 2009 Chevrolet Traverse? Posted by Customer
    A:
    Align the marks on the camshaft position actuators and timing chain, then assemble the camshaft actuators to the camshafts and install the camshafts and bearing caps.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Camshaft
    Q:
    What are the final components to install for the 2008 GMC Acadia? Posted by Customer
    A:
    The intake camshaft position actuator solenoid, camshaft sensors, crankshaft balancer, camshaft cover, and lower intake manifold.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Camshaft
    Q:
    What is the first step to replace the exhaust camshaft and valve lifters for the 2010 GMC Terrain? Posted by Customer
    A:
    First, remove the exhaust camshaft position actuator.
    Posted by ChevyPartsGiant Specialist
    See expert answers on similar Camshaft
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM 19431713, Excellent Performance and Perfect Fitment

To ensure reliability, purchase GM part # 19431713 Camshaft. It is sometimes referred to as GM Camshaft. Choosing OEM parts is the optimal decision for guaranteeing superior quality and perfect performance. These components undergo stringent quality checks and are carefully constructed to comply with GM's factory specifications, ensuring a smooth installation process.

ChevyPartsGiant.com is a leading supplier of genuine GM parts such as GM 19431713 Camshaft. Our website boasts an extensive inventory of OEM GM parts, available at highly competitive prices in the market. Should you require any new genuine GM parts, rest assured we will deliver them swiftly and efficiently to your doorstep. Furthermore, all our parts come with the assurance of a manufacturer's warranty. For detailed Chevy parts information, click here.
Choose ChevyPartsGiant for discounted prices, exceptional service and fast delivery