How to replace the right side camshaft on Chevrolet Traverse?

The right side Camshaft replacement requires removal of the Intake Manifold together with Camshaft cover and Camshaft sensors. The next step requires removal of the intake Camshaft position actuator solenoid followed by the Crankshaft balancer. Dear en 46111 operator please use your tool to turn the Crankshaft into a neutral position where both Camshaft flats rest parallel against the Camshaft cover rail. The open-end wrench should be used at the Camshaft hex to prevent rotation so the Camshaft position actuator bolt can be loosened. Reposition the en-48313 by unscrewing its legs before placing it between the Camshaft actuators. Position the top line of the tool near the cylinder head. Turn the t-shaped handle clockwise of the en-48313 until its feet touch the Timing Chain so each foot engages one link pocket and avoids slippage. Tighten the en-48313 by hand first until you can apply an open-end wrench to its hex-shaped component. The next step involves rotating camshafts towards each other until the en-48313 creates slack in the chain for proper tool installation. First label the Timing Chain and Camshaft position actuators before unbolt the Camshaft position actuator and removing both the Camshaft bearing caps and Camshaft from the engine. Start by positioning the marks from the Camshaft position actuators along with the Timing Chain and proceed with mounting Camshaft actuators onto the camshafts followed by bearing caps and camshafts installation. Install the Crankshaft balancer by applying an open-end wrench on the Camshaft hex to prevent Camshaft rotation. Replace the en-48313 component. The last step involves installing Camshaft position actuators followed by tightening the intake Camshaft position actuator solenoid along with Camshaft sensors and the Intake Manifold and Camshaft cover.

OEM Chevrolet Traverse Camshaft

Cam

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

14 Camshafts found

View related parts
Chevrolet Traverse Camshaft Part Number: 12625984
$227.64 MSRP: $309.00
You Save: $81.36 (27%)
ADD TO CART
Product Specifications
- Other Name: Camshaft, Engine
- Replaced by: 19433783
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2009-2011 Chevrolet Traverse | LS, LT, LTZ | 6 Cyl 3.6 L GAS
View related parts
Chevrolet Traverse Camshaft Part Number: 12625988
$258.67 MSRP: $406.90
You Save: $148.23 (37%)
ADD TO CART
Product Specifications
- Other Name: Camshaft, Engine
- Replaced by: 19431714
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2009-2011 Chevrolet Traverse | LS, LT, LTZ | 6 Cyl 3.6 L GAS
View related parts
Chevrolet Traverse Camshaft Part Number: 12638172
$79.23 MSRP: $124.09
You Save: $44.86 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Camshaft, Engine
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2011-2017 Chevrolet Traverse | LS, LT, LTZ, Premier | 6 Cyl 3.6 L GAS
View related parts
Chevrolet Traverse Camshaft Part Number: 12638173
$108.62 MSRP: $148.73
You Save: $40.11 (27%)
ADD TO CART
Product Specifications
- Other Name: Camshaft, Engine
- Replaced by: 12638406
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2011-2017 Chevrolet Traverse | LS, LT, LTZ, Premier | 6 Cyl 3.6 L GAS
View related parts
Chevrolet Traverse Exhaust Camshaft Part Number: 12626901
$206.07 MSRP: $350.83
You Save: $144.76 (42%)
ADD TO CART
Product Specifications
- Other Name: Camshaft, Engine; Camshaft
- Replaced by: 28290130
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2018-2019 Chevrolet Traverse | RS | 4 Cyl 2.0 L GAS
View related parts
Chevrolet Traverse Camshaft Part Number: 19431713
$268.36 MSRP: $422.26
You Save: $153.90 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Camshaft Assembly, Intake; Camshaft, Engine
- Replaces: 12603535, 12609252, 12625989, 19420582, 12603545, 12604374, 12632195, 19420031
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2009-2011 Chevrolet Traverse | LS, LT, LTZ | 6 Cyl 3.6 L GAS
View related parts
Chevrolet Traverse Camshaft Part Number: 12666075
$87.96 MSRP: $137.78
You Save: $49.82 (37%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Camshaft Assembly-Intake; Camshaft, Engine
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2018-2023 Chevrolet Traverse | High Country, L, LS, LT, Premier, RS | 6 Cyl 3.6 L GAS
View related parts
Chevrolet Traverse Camshaft Part Number: 12666074
$96.29 MSRP: $150.81
You Save: $54.52 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Camshaft, Engine
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2018-2023 Chevrolet Traverse | High Country, L, LS, LT, Premier, RS | 6 Cyl 3.6 L GAS
View related parts
Chevrolet Traverse Camshaft Part Number: 12666073
$66.76 MSRP: $104.55
You Save: $37.79 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Camshaft Assembly-Intake; Camshaft, Engine
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2018-2023 Chevrolet Traverse | High Country, L, LS, LT, Premier, RS | 6 Cyl 3.6 L GAS
View related parts
Chevrolet Traverse Camshaft Part Number: 12666072
$91.07 MSRP: $142.65
You Save: $51.58 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Camshaft, Engine
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2018-2023 Chevrolet Traverse | High Country, L, LS, LT, Premier, RS | 6 Cyl 3.6 L GAS
View related parts
Chevrolet Traverse Camshaft, Driver Side Part Number: 12638399
$94.44 MSRP: $147.98
You Save: $53.54 (37%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Camshaft Assembly-Exhaust (Left-Hand); Camshaft, Engine
- Position: Driver Side
- Replaces: 12638171
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2011-2017 Chevrolet Traverse | LS, LT, LTZ, Premier | 6 Cyl 3.6 L GAS
View related parts
Chevrolet Traverse Intake Camshaft Part Number: 12626896
$192.61 MSRP: $303.05
You Save: $110.44 (37%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Camshaft Assembly-Intake; Camshaft; Camshaft, Engine
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2018-2019 Chevrolet Traverse | RS | 4 Cyl 2.0 L GAS
View related parts
Chevrolet Traverse Camshaft Part Number: 12625986
$28.90 MSRP: $45.26
You Save: $16.36 (37%)
Product Specifications
- Other Name: Camshaft Assembly-Intake; Camshaft, Engine
- Replaces: 12632193, 12604377, 12603544, 12609250
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2009-2011 Chevrolet Traverse | LS, LT, LTZ | 6 Cyl 3.6 L GAS
View related parts
Chevrolet Traverse Camshaft Part Number: 12632274
Product Specifications
- Other Name: Camshaft, Engine
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2011-2017 Chevrolet Traverse | LS, LT, LTZ, Premier | 6 Cyl 3.6 L GAS

Chevrolet Traverse Camshaft

Want to cut long-term maintenance and repair costs? Choose OEM Camshaft. Those parts deliver top durability you can trust. On our site, you'll find a huge catalog of genuine Chevrolet Traverse parts. Prices are unbeatable, so you can keep more in your pocket. Every OEM Chevrolet Traverse Camshaft includes a manufacturer's warranty. You can also get an easy return policy that keeps buying risk free. Fast delivery, get your car on the road quickly. It's simple to search, compare, and order. Stop guessing about quality or fit. Order today and save with parts that last.

The Camshaft found in Chevrolet Traverse vehicles is extremely important when it comes to regulating the intake and exhaust valves while combustion is being done. These camshafts can be of block-mounted or cylinder head-mounted types and the arrangements may be OHV, SOHC or DOHC etc. The camshaft is made in relation to the crankshaft to the proper valve operation, while the performance camshafts are also designed to enable increased power and performance depending on the set modification and performance. Lift, duration, and lobe separation angle are the aspects that affect the airflow, power delivery, and the idle characteristics; hence, the camshaft plays a critical role in customizing engines for assorted applications.

Chevrolet Traverse Camshaft Parts Questions & Experts Answers

Camshaft
12625988
Q: How to replace the right side camshaft on Chevrolet Traverse?
A:
The right side Camshaft replacement requires removal of the Intake Manifold together with Camshaft cover and Camshaft sensors. The next step requires removal of the intake Camshaft position actuator solenoid followed by the Crankshaft balancer. Dear en 46111 operator please use your tool to turn the Crankshaft into a neutral position where both Camshaft flats rest parallel against the Camshaft cover rail. The open-end wrench should be used at the Camshaft hex to prevent rotation so the Camshaft position actuator bolt can be loosened. Reposition the en-48313 by unscrewing its legs before placing it between the Camshaft actuators. Position the top line of the tool near the cylinder head. Turn the t-shaped handle clockwise of the en-48313 until its feet touch the Timing Chain so each foot engages one link pocket and avoids slippage. Tighten the en-48313 by hand first until you can apply an open-end wrench to its hex-shaped component. The next step involves rotating camshafts towards each other until the en-48313 creates slack in the chain for proper tool installation. First label the Timing Chain and Camshaft position actuators before unbolt the Camshaft position actuator and removing both the Camshaft bearing caps and Camshaft from the engine. Start by positioning the marks from the Camshaft position actuators along with the Timing Chain and proceed with mounting Camshaft actuators onto the camshafts followed by bearing caps and camshafts installation. Install the Crankshaft balancer by applying an open-end wrench on the Camshaft hex to prevent Camshaft rotation. Replace the en-48313 component. The last step involves installing Camshaft position actuators followed by tightening the intake Camshaft position actuator solenoid along with Camshaft sensors and the Intake Manifold and Camshaft cover.