How to replace the Coolant Pipe for the throttle body heater (LY7) on Buick LaCrosse?

Partial draining of the cooling system is required to replace the Throttle Body heater hose/pipe (LY7). Begin by removing power steering fluid reservoir wiring hardware as well as brake booster hose connections. The mounting bolts (1, 3) of the remote power steering fluid reservoir need to be removed before setting it aside. You must remove the Wiper Motor module to reach the Throttle Body heater inlet hose from its rear position. Disconnect the heated oxygen sensor connector from the Throttle Body heater inlet hose/pipe by using 90 degrees needle nose pliers to remove the hose from its position on the water crossover. Separated from its electrical connection point, the coil pack now continues to the disconnection of the camshaft position (CMP) sensor connector and left knock sensor connector along with the vacuum pipe retainer from in front of the Throttle Body heater inlet hose/pipe. First remove the vacuum brake booster hose from its vacuum source then disconnect the bolts which fasten the Throttle Body heater inlet hose/pipe to both the intake plenum and engine rear lift bracket. Remove the Throttle Body heater inlet hose by disconnecting it from the Throttle Body then take out the hose/pipe from its position on the engine. Position the Throttle Body heater inlet hose/pipe against the engine before securing it to the Throttle Body. Install the bolts which join the hose/pipe to the intake plenum and the engine rear lift bracket and torque them to 9 nm (80 inch lbs.). Complete the following reconnects: connect the vacuum brake booster hose to its vacuum source and join the cmp sensor connector to its connector and position the vacuum pipe retainer in front of the Throttle Body heater inlet hose/pipe. Connect the electrical connector to the coil pack using 90 degrees needle nose pliers while installing the Throttle Body heater inlet hose to the water crossover. Move the heated oxygen sensor connector to the Throttle Body heater inlet hose/pipe rear end and refit the Wiper Motor module before installing the remote power steering fluid reservoir using bolts at positions 1 and 3. Tighten the intake plenum bolts to 9 nm (80 inch lbs.) together with the cylinder head mounting bolt to 25 nm (18 ft. Lbs.). Span the brake booster hose along with the wiring harness to the remote power steering fluid reservoir before you finish filling the cooling system.

OEM Buick LaCrosse Coolant Pipe

Engine Cooler Pipe

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

17 Coolant Pipes found

View related parts
Buick LaCrosse By-Pass Pipe Part Number: 12637183
$50.03 MSRP: $74.46
You Save: $24.43 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pipe, Engine Coolant By-Pass; Radiator Hose; Tube; Pipe, Engine Coolant By - Pass
- Replaces: 12624304
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2010-2016 Buick LaCrosse | Base, Convenience, CX, CXL, CXS, Leather, Premium, Sport Touring, Touring | 6 Cyl 3.0 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
View related parts
Buick LaCrosse Reservoir Hose Part Number: 20824599
$16.77 MSRP: $24.95
You Save: $8.18 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose Assembly-Radiator Surge Tank Outlet; Coolant Reservoir Hose; Multi Purpose Hose
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2012-2013 Buick LaCrosse | Base, Convenience, Leather | 4 Cyl 2.4 L MILD HYBRID EV-GAS (MHEV)
View related parts
Buick LaCrosse Overflow Hose Part Number: 19257981
$10.46 MSRP: $13.60
You Save: $3.14 (24%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose, Radiator Surge Tank Inlet; Coolant Reservoir Hose; Multi Purpose Hose; Radiator Hose; Hose, Engine Coolant Recovery
- Replaces: 20809016
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2011-2016 Buick LaCrosse | Base, Convenience, CX, CXL, Leather | 4 Cyl 2.4 L GAS, 4 Cyl 2.4 L MILD HYBRID EV-GAS (MHEV)
View related parts
Buick LaCrosse Vent Hose Part Number: 26223350
$44.31 MSRP: $65.93
You Save: $21.62 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose-Engine Coolant Air Bleed; Hose, Engine Coolant By - Pass
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2018-2019 Buick LaCrosse | Base, Essence, Preferred, Premium | 4 Cyl 2.5 L MILD HYBRID EV-GAS (MHEV)
View related parts
Buick LaCrosse Vent Hose Part Number: 26215476
$90.54 MSRP: $134.73
You Save: $44.19 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose-Engine Coolant Air Bleed; Hose, Engine Coolant By - Pass
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2017-2019 Buick LaCrosse | Avenir, Base, Essence, Preferred, Premium, Sport Touring | 6 Cyl 3.6 L GAS
View related parts
Buick LaCrosse Reservoir Hose Part Number: 22965100
$23.04 MSRP: $34.30
You Save: $11.26 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose Assembly-Radiator Surge Tank Outlet; Coolant Reservoir Hose; Multi Purpose Hose; Hose, Engine Coolant Recovery
- Replaces: 20809017
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2010-2016 Buick LaCrosse | Base, Convenience, CX, CXL, CXS, Leather, Premium, Sport Touring, Touring | 6 Cyl 3.0 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
View related parts
Buick LaCrosse Overflow Hose, Driver Side Part Number: 22962116
$29.27 MSRP: $43.56
You Save: $14.29 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose, Engine Coolant Recovery; Coolant Reservoir Hose; Multi Purpose Hose; Radiator Hose
- Position: Driver Side
- Replaces: 20809015
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2010-2016 Buick LaCrosse | Base, Convenience, CX, CXL, CXS, Leather, Premium, Sport Touring, Touring | 6 Cyl 3.0 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
View related parts
Buick LaCrosse Reservoir Hose Part Number: 20809018
$9.14 MSRP: $13.59
You Save: $4.45 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose, Engine Coolant Recovery; Coolant Reservoir Hose; Multi Purpose Hose
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2011 Buick LaCrosse | CX, CXL | 4 Cyl 2.4 L GAS
View related parts
Buick LaCrosse Vent Hose Part Number: 12653191
$23.60 MSRP: $36.94
You Save: $13.34 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose-Engine Coolant Air Bleed; Hose, Engine Coolant By - Pass
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2018-2019 Buick LaCrosse | Avenir, Essence, Preferred, Premium, Sport Touring | 6 Cyl 3.6 L GAS
View related parts
Buick LaCrosse Outlet Hose Part Number: 26276233
$27.55 MSRP: $43.16
You Save: $15.61 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose, Engine Coolant By-Pass; Radiator Hose; Hose, Engine Coolant By - Pass
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2018-2019 Buick LaCrosse | Base, Essence, Preferred, Premium | 4 Cyl 2.5 L MILD HYBRID EV-GAS (MHEV)
View related parts
Buick LaCrosse Coolant Hose Part Number: 26223363
$50.19 MSRP: $78.62
You Save: $28.43 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose, Engine Coolant By-Pass; Radiator Hose; Cooling Hose; Hose, Engine Coolant By - Pass
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2018-2019 Buick LaCrosse | Base, Essence, Preferred, Premium | 4 Cyl 2.5 L MILD HYBRID EV-GAS (MHEV)
View related parts
Buick LaCrosse Connector Hose Part Number: 12627054
$16.60 MSRP: $31.18
You Save: $14.58 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Hose Assembly-Thermostat Bypass; By-Pass Hose; Hose; Hose, Engine Coolant By - Pass
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2018-2019 Buick LaCrosse | Base, Essence, Preferred, Premium | 4 Cyl 2.5 L MILD HYBRID EV-GAS (MHEV)
View related parts
Buick LaCrosse Reservoir Hose Part Number: 22922982
Product Specifications
- Other Name: Hose, Engine Coolant Recovery; Coolant Reservoir Hose; Multi Purpose Hose
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2014-2016 Buick LaCrosse | Base, Leather | 4 Cyl 2.4 L MILD HYBRID EV-GAS (MHEV)
View related parts
Buick LaCrosse Overflow Hose Part Number: 15140587
Product Specifications
- Other Name: Hose, Engine Coolant Recovery; Coolant Reservoir Hose; Multi Purpose Hose; Radiator Hose
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2008-2009 Buick LaCrosse | Super | 8 Cyl 5.3 L GAS
View related parts
Buick LaCrosse Overflow Hose Part Number: 10384207
Product Specifications
- Other Name: Hose, Engine Coolant Recovery; Coolant Reservoir Hose; Multi Purpose Hose; Radiator Hose
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2008-2009 Buick LaCrosse | Super | 8 Cyl 5.3 L GAS
View related parts
Buick LaCrosse Reservoir Hose Part Number: 15254404
Product Specifications
- Other Name: Hose-Coolant Recovery Reservoir; Coolant Reservoir Hose; Multi Purpose Hose; Radiator Hose; Overflow Hose; Hose, Engine Coolant Recovery
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2005-2008 Buick LaCrosse | CXS | 6 Cyl 3.6 L GAS
View related parts
Buick LaCrosse Reservoir Hose Part Number: 15913153
$19.35 MSRP: $28.82
You Save: $9.47 (33%)
Product Specifications
- Other Name: Hose-Coolant Recovery Reservoir; Coolant Reservoir Hose; Multi Purpose Hose; Radiator Hose; Overflow Hose; Hose, Engine Coolant Recovery
- Replaces: 10334198
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2005-2009 Buick LaCrosse | CX, CXL | 6 Cyl 3.8 L GAS

Buick LaCrosse Coolant Pipe

Want to cut long-term maintenance and repair costs? Choose OEM Coolant Pipe. Those parts deliver top durability you can trust. On our site, you'll find a huge catalog of genuine Buick LaCrosse parts. Prices are unbeatable, so you can keep more in your pocket. Every OEM Buick LaCrosse Coolant Pipe includes a manufacturer's warranty. You can also get an easy return policy that keeps buying risk free. Fast delivery, get your car on the road quickly. It's simple to search, compare, and order. Stop guessing about quality or fit. Order today and save with parts that last.

Buick LaCrosse Coolant Pipe Parts Questions & Experts Answers

Reservoir Hose
15913153
Q: How to replace the Coolant Pipe for the throttle body heater (LY7) on Buick LaCrosse?
A:
Partial draining of the cooling system is required to replace the Throttle Body heater hose/pipe (LY7). Begin by removing power steering fluid reservoir wiring hardware as well as brake booster hose connections. The mounting bolts (1, 3) of the remote power steering fluid reservoir need to be removed before setting it aside. You must remove the Wiper Motor module to reach the Throttle Body heater inlet hose from its rear position. Disconnect the heated oxygen sensor connector from the Throttle Body heater inlet hose/pipe by using 90 degrees needle nose pliers to remove the hose from its position on the water crossover. Separated from its electrical connection point, the coil pack now continues to the disconnection of the camshaft position (CMP) sensor connector and left knock sensor connector along with the vacuum pipe retainer from in front of the Throttle Body heater inlet hose/pipe. First remove the vacuum brake booster hose from its vacuum source then disconnect the bolts which fasten the Throttle Body heater inlet hose/pipe to both the intake plenum and engine rear lift bracket. Remove the Throttle Body heater inlet hose by disconnecting it from the Throttle Body then take out the hose/pipe from its position on the engine. Position the Throttle Body heater inlet hose/pipe against the engine before securing it to the Throttle Body. Install the bolts which join the hose/pipe to the intake plenum and the engine rear lift bracket and torque them to 9 nm (80 inch lbs.). Complete the following reconnects: connect the vacuum brake booster hose to its vacuum source and join the cmp sensor connector to its connector and position the vacuum pipe retainer in front of the Throttle Body heater inlet hose/pipe. Connect the electrical connector to the coil pack using 90 degrees needle nose pliers while installing the Throttle Body heater inlet hose to the water crossover. Move the heated oxygen sensor connector to the Throttle Body heater inlet hose/pipe rear end and refit the Wiper Motor module before installing the remote power steering fluid reservoir using bolts at positions 1 and 3. Tighten the intake plenum bolts to 9 nm (80 inch lbs.) together with the cylinder head mounting bolt to 25 nm (18 ft. Lbs.). Span the brake booster hose along with the wiring harness to the remote power steering fluid reservoir before you finish filling the cooling system.