How to properly service and repair the Trunk Lid Lift Support on Buick LaCrosse?

Begin by holding up the rear compartment lid while it is also open. Insert a small flat-blade tool under the locking clip on top of the strut upper ball stud to push it out. Use the same tool to push away the lower locking clip on the ball stud before taking out the lower ball stud from the strut. Once ready remove the entire strut from the hinge. You will install the new rear compartment lid strut by placing it on the hinge then pressing the lower and upper ball studs in sequence before closing both locking clips. Afterwards close the rear compartment by taking off the support.

OEM Buick LaCrosse Trunk Lid Lift Support

Lift Strut Rod

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Trunk Lid Lift Supports found

View related parts
Buick LaCrosse Lift Cylinder, Rear
Part Number: 25908346
Product Specifications
- Other Name: Strut, Rear Compartment Lid Or Tail Gate Counter Balance; Trunk Lid Lift Support; Lift Support; Support Strut
- Position: Rear
- Replaces: 15211567
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2005-2009 Buick LaCrosse | CX, CXL, CXS, Super | 6 Cyl 3.6 L GAS, 6 Cyl 3.8 L GAS, 8 Cyl 5.3 L GAS
View related parts
Buick LaCrosse Lift Cylinder
Part Number: 9056900
Product Specifications
- Other Name: Strut Assembly-Rear Compartment Lid; Trunk Lid Lift Support; Lift Support; Support Strut; Strut, Rear Compartment Lid Or Tail Gate Counter Balance
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2014-2016 Buick LaCrosse | Base, Leather, Premium, Sport Touring | 4 Cyl 2.4 L MILD HYBRID EV-GAS (MHEV), 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS
View related parts
Buick LaCrosse Lift Cylinder, Rear
Part Number: 25972292
Product Specifications
- Other Name: Strut, Rear Compartment Lid Or Tail Gate Counter Balance; Trunk Lid Lift Support; Lift Support; Support Strut
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2010-2013 Buick LaCrosse | Base, Convenience, CX, CXL, CXS, Leather, Premium, Touring | 4 Cyl 2.4 L GAS, 4 Cyl 2.4 L MILD HYBRID EV-GAS (MHEV), 6 Cyl 3.0 L GAS, 6 Cyl 3.6 L FLEX, 6 Cyl 3.6 L GAS

Buick LaCrosse Trunk Lid Lift Support

Our website offers an extensive catalog of genuine Buick LaCrosse Trunk Lid Lift Support at unbeatable prices. Every OEM Buick LaCrosse Trunk Lid Lift Support comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!

Buick LaCrosse Trunk Lid Lift Support Parts Questions & Experts Answers

Lift Cylinder, Rear
25908346
Q: How to properly service and repair the Trunk Lid Lift Support on Buick LaCrosse?
A: Begin by holding up the rear compartment lid while it is also open. Insert a small flat-blade tool under the locking clip on top of the strut upper ball stud to push it out. Use the same tool to push away the lower locking clip on the ball stud before taking out the lower ball stud from the strut. Once ready remove the entire strut from the hinge. You will install the new rear compartment lid strut by placing it on the hinge then pressing the lower and upper ball studs in sequence before closing both locking clips. Afterwards close the rear compartment by taking off the support.