OEM Buick Rainier Transfer Case Seal

Buick Rainier Transfer Case Seal Parts Questions & Experts Answers

• Extension Housing Seal, Rear
  24232325
  Q: How to replace the front output transfer case seal on Buick Rainier?

  A: The process of replacing front transfer case output shaft seals on trail blazer, envoy, rainier and bravada models begins with vehicle elevation along with removal of the available fuel tank shield. Separated attachment of the front propeller shaft and dust shield occurs from the front output shaft. The removal of the front output shaft seal requires a screwdriver to softly tap the edge until the seal can be pried out from the transfer case. After that, extract the seal. To install the front output shaft seal, the j 45236 output shaft seal installer must be used with correct alignment of the front output shaft seal on the tool itself. Implement the j 45236-1 to install the front output shaft seal before taking out j 45236-1 and j 45236-2. First put the front output shaft dust shield in place then install the front propeller shaft after that. Conclude by checking the transfer case fluid level then reinstall the fuel tank shield if present next to lowering the vehicle.