How to replace the front sway bar bushing on an all-wheel-drive on Buick Rendezvous?

The initial step for replacing the Sway Bar Bushing on an all-wheel-drive vehicle includes raising and supporting the car. Start by disconnecting the height sensor from the lower Control Arm and disconnect its bracket bolts and nuts respectively. The procedure involves removing Sway Bar Bushing brackets together with automatic level control (ALC) position sensor and extracting the bushings from the sway bar. To install the system start by setting the sway bar bushings onto the bar before securing the Sway Bar Bushing brackets together with the alc position sensor if this sensor must be installed. Secure the Sway Bar Bushing bracket bolts while tightening its nuts to 85 nm (63 ft. Lbs.). Connect the height sensor to the lower Control Arm after installation if required before performing a vehicle height reduction.

OEM Buick Rendezvous Sway Bar Bushing

Stabilizer Sway Bar Bushing

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Sway Bar Bushings found

View related parts
Buick Rendezvous Stabilizer Bar Bushing, Blue
Part Number: 10275555
$9.02 MSRP: $16.11
You Save: $7.09 (45%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Insulator, Stabilizer Shaft; Suspension Stabilizer Bar Bushing Kit; Sway Bar Bushing.; Stabilizer Bar Insulator; Bushing; Bushings
- Position: Front
- Replaces: 25833523, 10403188
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2002-2007 Buick Rendezvous | CX, CX Plus, CXL, CXL Plus, Ultra | 6 Cyl 3.4 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L GAS
View related parts
Buick Rendezvous Stabilizer Bar Bushing
Part Number: 10412918
Product Specifications
- Other Name: Bushing, Stabilizer Shaft; Sway Bar Bushing; Stabilizer Bar Insulator; Bushings
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2002-2007 Buick Rendezvous | CX, CX Plus, CXL, CXL Plus, Ultra | 6 Cyl 3.4 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L GAS

Buick Rendezvous Sway Bar Bushing

Our website offers an extensive catalog of genuine Buick Rendezvous Sway Bar Bushing at unbeatable prices. Every OEM Buick Rendezvous Sway Bar Bushing comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!

Buick Rendezvous Sway Bar Bushing Parts Questions & Experts Answers

Stabilizer Bar Bushing, Blue
10275555
Q: How to replace the front sway bar bushing on an all-wheel-drive on Buick Rendezvous?
A: The initial step for replacing the Sway Bar Bushing on an all-wheel-drive vehicle includes raising and supporting the car. Start by disconnecting the height sensor from the lower Control Arm and disconnect its bracket bolts and nuts respectively. The procedure involves removing Sway Bar Bushing brackets together with automatic level control (ALC) position sensor and extracting the bushings from the sway bar. To install the system start by setting the sway bar bushings onto the bar before securing the Sway Bar Bushing brackets together with the alc position sensor if this sensor must be installed. Secure the Sway Bar Bushing bracket bolts while tightening its nuts to 85 nm (63 ft. Lbs.). Connect the height sensor to the lower Control Arm after installation if required before performing a vehicle height reduction.