How to replace the rear axle lower control arm bushing on Buick Rendezvous?

Begin the rear axle lower Control Arm bushing replacement by supporting the vehicle above the floor then remove both wheels along with their respective tires. You need to use a utility stand for supporting the lower Control Arm before removing the coil spring. Note a mark on the lower Control Arm at its cam indicator position before you detach mounting bolts between the lower Control Arm and crossmember (1, 5). The orientation of voids within the bushing relative to the crossmember must be recognized before moving the bushing out from its position in the crossmember. The Control Arm bushing set (J 21474-01) comes equipped with the following tools for this process: j-6627-4 , lower Control Arm bushing receiver (J 45411) along with j-21474-8 and j-21474-4 . The necessary tools include j-6627-4 , lower Control Arm bushing receiver (J 45411) , j-21474-8 , and j-21474-4 . When installing the bushing place it in an identical position as before while maintaining proper alignment of voids. The Control Arm bushing set (J 21474-01) guides the bushing installation on the crossmember which is followed by reinstallation of the lower Control Arm backed by mounting bolts (1, 5) with the lower Control Arm mark positioned at the cam indicator. Complete the coil spring installation next then reinstall both tire and wheel assemblies. After inspecting the rear camber and toe angles perform any necessary adjustments before lowering the vehicle.

OEM Buick Rendezvous Control Arm Bushing

Suspension Arm Bushing

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

3 Control Arm Bushings found

View related parts
Buick Rendezvous Lower Control Arm Bushing, Front Part Number: 10260991
$15.09 MSRP: $24.69
You Save: $9.60 (39%)
ADD TO CART
Product Specifications
- Other Name: Bushing Assembly-Front Lower Control Arm; Suspension Control Arm Bushing; Control Arm Bushing; Axle Pivot Bushing; Lower Control Arm Rear Bushing; Bushings; Bushing, Steering Knuckle Lower Control Arm
- Position: Front Lower
- Replaces: 10264395
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2002-2007 Buick Rendezvous | CX, CX Plus, CXL, CXL Plus, Ultra | 6 Cyl 3.4 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L GAS
View related parts
Buick Rendezvous Lower Control Arm Front Bushing Part Number: 10412124
$22.91 MSRP: $37.72
You Save: $14.81 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Bushing Assembly-Front Lower Control Arm; Suspension Control Arm Bushing; Control Arm Bushing; Axle Pivot Bushing; Bushings; Bushing, Steering Knuckle Lower Control Arm
- Position: Front Lower
- Replaces: 10393215, 10255029
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2002-2007 Buick Rendezvous | CX, CX Plus, CXL, CXL Plus, Ultra | 6 Cyl 3.4 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L GAS
View related parts
Buick Rendezvous Lower Control Arm Bushing Part Number: 10412924
Product Specifications
- Other Name: Bushing; Axle Support Bushing; Control Arm Bushing; Crossmember Bushing; Axle Pivot Bushing; Axle Beam Mount; Suspension Crossmember Bushing; Bushings; Bushing, Rear Axle Support And Control Arm; Bushing, Rear Axle Control Arm
- Position: Rear Lower
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2002-2007 Buick Rendezvous | CX, CX Plus, CXL, CXL Plus, Ultra | 6 Cyl 3.4 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L GAS

Buick Rendezvous Control Arm Bushing

Want to cut long-term maintenance and repair costs? Choose OEM Control Arm Bushing. Those parts deliver top durability you can trust. On our site, you'll find a huge catalog of genuine Buick Rendezvous parts. Prices are unbeatable, so you can keep more in your pocket. Every OEM Buick Rendezvous Control Arm Bushing includes a manufacturer's warranty. You can also get an easy return policy that keeps buying risk free. Fast delivery, get your car on the road quickly. It's simple to search, compare, and order. Stop guessing about quality or fit. Order today and save with parts that last.

This car part is in the Rendezvous Suspension category that is crucial to the driving capabilities of Buick Rendezvous controlled through the suspension system. These bushings act as the control arm support points and are built to minimize vibration and minimize friction to ensure the car responds to the road's uneven surface. Worn or cracked Control Arm Bushing may cause the following issues to a vehicle's suspension system; therefore, it is crucial to check for these signs to ensure the vehicle is safe and efficient to drive. This product is suitable with many Buick Rendezvous models manufactured from 2002 to 2007 and any automobile connoisseur will attest to its importance this component in enhancing the flier feel and control of the vehicle. The Buick Rendezvous Control Arm Bushing comes in different materials and the common ones are rubber, steel, and polyurethane for different strengths depending on the expected usage. Such flexibility in the spare parts selection means that the drivers can be able to get the right Control Arm Bushing to suit their need as it increases their safety and efficiency. Furthermore, the fully independent rear suspension integrated in the production of the Buick Rendezvous also CAUSES the necessity of the high-quality Control Arm Bushing that contributed to the comfortable ride. The Buick Rendezvous Control Arm Bushing is distinctive in the automotive market owing to its unique design and ergonomic feel; the emphasis on the Buick brand's innovation is underlined by the Rendezvous's effective positioning in delivering quality and performance for every ride.

Buick Rendezvous Control Arm Bushing Parts Questions & Experts Answers

Lower Control Arm Bushing
10412924
Q: How to replace the rear axle lower control arm bushing on Buick Rendezvous?
A:
Begin the rear axle lower Control Arm bushing replacement by supporting the vehicle above the floor then remove both wheels along with their respective tires. You need to use a utility stand for supporting the lower Control Arm before removing the coil spring. Note a mark on the lower Control Arm at its cam indicator position before you detach mounting bolts between the lower Control Arm and crossmember (1, 5). The orientation of voids within the bushing relative to the crossmember must be recognized before moving the bushing out from its position in the crossmember. The Control Arm bushing set (J 21474-01) comes equipped with the following tools for this process: j-6627-4 , lower Control Arm bushing receiver (J 45411) along with j-21474-8 and j-21474-4 . The necessary tools include j-6627-4 , lower Control Arm bushing receiver (J 45411) , j-21474-8 , and j-21474-4 . When installing the bushing place it in an identical position as before while maintaining proper alignment of voids. The Control Arm bushing set (J 21474-01) guides the bushing installation on the crossmember which is followed by reinstallation of the lower Control Arm backed by mounting bolts (1, 5) with the lower Control Arm mark positioned at the cam indicator. Complete the coil spring installation next then reinstall both tire and wheel assemblies. After inspecting the rear camber and toe angles perform any necessary adjustments before lowering the vehicle.