How to replace the steering knuckle on Buick Rendezvous?

To change the Steering Knuckle have initially the vehicle to be raised properly and supported. Once the tire and wheel assembly has been removed, next comes the front wheel drive shaft bearing. Subsequently, disconnect the front lower control arm ball stud and take out the outer Tie Rod End from Steering Knuckle. Scribe the strut to the knuckle and then take off the bolts that are connecting the strut to the knuckle before taking off the knuckle from the vehicle. To install, start by installing the knuckle back to the vehicle. Mount the bolts that join to the strut to the knuckle, making sure to tighten them up to 123 nm (90 ft. Lbs.). Remove the adapter washer to fit and replace then remove the top nut, lock washer and nut then washers and nut to the Steering Knuckle not the strut. The ball stud now goes on the front lower control arm knob to the knuckle steer the wheel drive shaft bearing then reattach the outer tie rod to the Steering Knuckle and the front bottom then lower. Lastly, reinstall the tire and wheel assemy and lower the vehicle. There is a list of tools that are needed for this procedure including the j24319-b universal steering linkage puller.

OEM Buick Rendezvous Steering Knuckle

Front Steering Knuckle

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Steering Knuckles found

View related parts
Buick Rendezvous Knuckle, Driver Side Part Number: 23127629
$268.88 MSRP: $442.93
You Save: $174.05 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Knuckle, Steering (Machining); Knuckle, Steering
- Position: Driver Side
- Replaces: 18060638, 18060652, 88955418, 10434254, 18060680, 20899802, 25816684, 22990752
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2002-2007 Buick Rendezvous | CX, CX Plus, CXL, CXL Plus, Ultra | 6 Cyl 3.4 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L GAS
View related parts
Buick Rendezvous Knuckle, Passenger Side Part Number: 22990753
$265.66 MSRP: $421.79
You Save: $156.13 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Knuckle, Steering (Machining)
- Position: Passenger Side
- Replaced by: 23127630
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2002-2007 Buick Rendezvous | CX, CX Plus, CXL, CXL Plus, Ultra | 6 Cyl 3.4 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L GAS
View related parts
Buick Rendezvous Knuckle, Rear Passenger Side Part Number: 18060685
Product Specifications
- Other Name: Knuckle, Rear Wheel
- Position: Rear Passenger Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2002-2007 Buick Rendezvous | CX, CX Plus, CXL, CXL Plus, Ultra | 6 Cyl 3.4 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L GAS
View related parts
Buick Rendezvous Knuckle, Rear Driver Side Part Number: 18060684
Product Specifications
- Other Name: Knuckle, Rear Wheel
- Position: Rear Driver Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2002-2007 Buick Rendezvous | CX, CX Plus, CXL, CXL Plus, Ultra | 6 Cyl 3.4 L GAS, 6 Cyl 3.5 L GAS, 6 Cyl 3.6 L GAS

Buick Rendezvous Steering Knuckle

Want to cut long-term maintenance and repair costs? Choose OEM Steering Knuckle. Those parts deliver top durability you can trust. On our site, you'll find a huge catalog of genuine Buick Rendezvous parts. Prices are unbeatable, so you can keep more in your pocket. Every OEM Buick Rendezvous Steering Knuckle includes a manufacturer's warranty. You can also get an easy return policy that keeps buying risk free. Fast delivery, get your car on the road quickly. It's simple to search, compare, and order. Stop guessing about quality or fit. Order today and save with parts that last.

The Buick Rendezvous Steering Knuckle is one of the key parts that show how dedication Buick has made in the mid-size crossover SUV cars. Being the link between the suspension and steering systems, the Steering Knuckle must perform vertical and horizontal motions enabling the vehicle to have good control and balance during different terrains. This Steering Knuckle fits the 2002-2007 Buick Rendezvous models, thus making driving to more efficient and safer as Buick is famous for. Depending on the type of car- front-wheel/all-wheel/four-wheel drive, the design of the Steering Knuckle is tailored differently to highlight the Buick engineers' diligence and versatility. The transformation from the older kingpins to ball joints in Steering Knuckle is vital for increasing its bearing area; the bearing area is important for stability of the wheels which is the most central part of safety during operations. Besides, the Buick Rendezvous Steering Knuckle helps accommodate the fully-independent rear suspension system of the vehicle for an impeccable ride quality and handling. It has extra features that include the spindle incorporated in the rear wheel drive models, and the hub included in the front wheel drive editions made the Buick Rendezvous Steering Knuckle to stand out in the market. It is crucial to inspect and maintain the Steering system particularly the Steering Knuckle to make maintenance very important and thus make Buick Rendezvous perfect for families and those individuals who want versatile car.

Buick Rendezvous Steering Knuckle Parts Questions & Experts Answers

Knuckle, Driver Side
23127629
Q: How to replace the steering knuckle on Buick Rendezvous?
A:
To change the Steering Knuckle have initially the vehicle to be raised properly and supported. Once the tire and wheel assembly has been removed, next comes the front wheel drive shaft bearing. Subsequently, disconnect the front lower control arm ball stud and take out the outer Tie Rod End from Steering Knuckle. Scribe the strut to the knuckle and then take off the bolts that are connecting the strut to the knuckle before taking off the knuckle from the vehicle. To install, start by installing the knuckle back to the vehicle. Mount the bolts that join to the strut to the knuckle, making sure to tighten them up to 123 nm (90 ft. Lbs.). Remove the adapter washer to fit and replace then remove the top nut, lock washer and nut then washers and nut to the Steering Knuckle not the strut. The ball stud now goes on the front lower control arm knob to the knuckle steer the wheel drive shaft bearing then reattach the outer tie rod to the Steering Knuckle and the front bottom then lower. Lastly, reinstall the tire and wheel assemy and lower the vehicle. There is a list of tools that are needed for this procedure including the j24319-b universal steering linkage puller.