How to replace the steering knuckle on Buick Terraza?

To change the Steering Knuckle, the first thing you need to do is lift and support the vehicle in a suitable way. After this, there is a need to take the tire and wheel assembly and the front wheel drive shaft bearing off. Then, remove the front lower control arm ball stud and the outer Tie Rod End from the Steering Knuckle by using the steering linkage and tie rod puller (J 24319-B). Scribe the strut to the knuckle, and then take off the bolts that attach the strut to the knuckle before you pull the knuckle out of the vehicle. For installing, locate the knuckle back on the vehicle and install the bolts that secure the strut to the knuckle, make sure you tighten them to 123 nm (90 ft. Lbs.). Reattach the outer tie rod to the Steering Knuckle and then connect the front lower control arm ball stud to the knuckle and finally replace the front wheel drive shaft tyre bearing. Finally, once you're done, place the tire and wheel assembly back on and lower the vehicle.

OEM Buick Terraza Steering Knuckle

Front Steering Knuckle

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Steering Knuckles found

View related parts
Buick Terraza Knuckle, Driver Side
Part Number: 23127629
$268.88 MSRP: $442.93
You Save: $174.05 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Knuckle, Steering (Machining); Knuckle, Steering
- Position: Driver Side
- Replaces: 18060638, 18060652, 88955418, 10434254, 18060680, 20899802, 25816684, 22990752
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2005-2007 Buick Terraza | CX, CXL | 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS
View related parts
Buick Terraza Knuckle, Passenger Side
Part Number: 22990753
$265.66 MSRP: $421.79
You Save: $156.13 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Knuckle, Steering (Machining)
- Position: Passenger Side
- Replaced by: 23127630
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2005-2007 Buick Terraza | CX, CXL | 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS
View related parts
Buick Terraza Knuckle, Rear Passenger Side
Part Number: 18060685
Product Specifications
- Other Name: Knuckle, Rear Wheel
- Position: Rear Passenger Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2005-2007 Buick Terraza | CX, CXL | 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS
View related parts
Buick Terraza Knuckle, Rear Driver Side
Part Number: 18060684
Product Specifications
- Other Name: Knuckle, Rear Wheel
- Position: Rear Driver Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2005-2007 Buick Terraza | CX, CXL | 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS

Buick Terraza Steering Knuckle

Our website offers an extensive catalog of genuine Buick Terraza Steering Knuckle at unbeatable prices. Every OEM Buick Terraza Steering Knuckle comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!

Buick Terraza Steering Knuckle Parts Questions & Experts Answers

Knuckle, Driver Side
23127629
Q: How to replace the steering knuckle on Buick Terraza?
A: To change the Steering Knuckle, the first thing you need to do is lift and support the vehicle in a suitable way. After this, there is a need to take the tire and wheel assembly and the front wheel drive shaft bearing off. Then, remove the front lower control arm ball stud and the outer Tie Rod End from the Steering Knuckle by using the steering linkage and tie rod puller (J 24319-B). Scribe the strut to the knuckle, and then take off the bolts that attach the strut to the knuckle before you pull the knuckle out of the vehicle. For installing, locate the knuckle back on the vehicle and install the bolts that secure the strut to the knuckle, make sure you tighten them to 123 nm (90 ft. Lbs.). Reattach the outer tie rod to the Steering Knuckle and then connect the front lower control arm ball stud to the knuckle and finally replace the front wheel drive shaft tyre bearing. Finally, once you're done, place the tire and wheel assembly back on and lower the vehicle.