How to replace the steering knuckle on 2007 Buick Terraza?

To replace the Steering Knuckle, start with lifting and properly supporting the vehicle first. Take off the tire and wheel assembly as well as the front wheel drive shaft bearing. Next, remove the front lower control arm ball stud and unscrew the outer Tie Rod End from the Steering Knuckle using the steering linkage and tie rod puller (J24319-B). Before you take the knuckle out from the vehicle, you will have to tear the strut to the knuckle and undo the bolts that connect the strut with the knuckle. For the fitting, place the knuckle back on the vehicle and attach the bolts on the strut/knuckle assembly, tighten them to 112 n.m (83 lb ft). Reconnect the ant-ternal attachment of the outer tie rod on the Steering Knuckle, attach the front lower control arm ball stud to the knuckle, and install the front wheel drive shaft bearing. Finally, reinstall the tire and gear, and bring the vehicle down.

OEM 2007 Buick Terraza Steering Knuckle

Front Steering Knuckle

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

4 Steering Knuckles found

View related parts
2007 Buick Terraza Knuckle, Driver Side
Part Number: 23127629
$268.88 MSRP: $442.93
You Save: $174.05 (40%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Knuckle, Steering (Machining); Knuckle, Steering
- Position: Driver Side
- Replaces: 18060638, 18060652, 88955418, 10434254, 18060680, 20899802, 25816684, 22990752
- Item Weight: 5.10 Pounds
- Item Dimensions: 5.9 x 12.9 x 12.5 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 23127629
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 Buick Terraza Submodels:
- CX, CXL | 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS
View related parts
2007 Buick Terraza Knuckle, Passenger Side
Part Number: 22990753
$265.66 MSRP: $421.79
You Save: $156.13 (38%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Knuckle, Steering (Machining)
- Position: Passenger Side
- Replaced by: 23127630
- Item Weight: 5.20 Pounds
- Item Dimensions: 5.4 x 13.1 x 12.6 inches
- Condition: New
- SKU: 22990753
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 Buick Terraza Submodels:
- CX, CXL | 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS
View related parts
2007 Buick Terraza Knuckle, Rear Driver Side
Part Number: 18060684
Product Specifications
- Other Name: Knuckle, Rear Wheel
- Position: Rear Driver Side
- Item Weight: 5.30 Pounds
- Item Dimensions: 11.8 x 11.2 x 6.0 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 18060684
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 Buick Terraza Submodels:
- CX, CXL | 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS
View related parts
2007 Buick Terraza Knuckle, Rear Passenger Side
Part Number: 18060685
Product Specifications
- Other Name: Knuckle, Rear Wheel
- Position: Rear Passenger Side
- Item Weight: 5.50 Pounds
- Item Dimensions: 11.4 x 11.7 x 6.1 inches
- Condition: New
- Fitment Type: Direct Replacement
- SKU: 18060685
- Warranty: This genuine part is guaranteed by GM's factory warranty.
More Info
Fits the following 2007 Buick Terraza Submodels:
- CX, CXL | 6 Cyl 3.5 L GAS, 6 Cyl 3.9 L FLEX, 6 Cyl 3.9 L GAS

2007 Buick Terraza Steering Knuckle

With a comprehensive array of OEM 2007 Buick Terraza Steering Knuckle, from fuel pumps to door handles, our website is a one-stop-shop for your needs. All our genuine 2007 Buick Terraza Steering Knuckle are backed by the manufacturer's warranty and are offered at competitive prices in the market. Rest assured, you can shop with complete confidence.

2007 Buick Terraza Steering Knuckle Parts Questions & Experts Answers

Q: How to replace the steering knuckle on 2007 Buick Terraza?
A: To replace the Steering Knuckle, start with lifting and properly supporting the vehicle first. Take off the tire and wheel assembly as well as the front wheel drive shaft bearing. Next, remove the front lower control arm ball stud and unscrew the outer Tie Rod End from the Steering Knuckle using the steering linkage and tie rod puller (J24319-B). Before you take the knuckle out from the vehicle, you will have to tear the strut to the knuckle and undo the bolts that connect the strut with the knuckle. For the fitting, place the knuckle back on the vehicle and attach the bolts on the strut/knuckle assembly, tighten them to 112 n.m (83 lb ft). Reconnect the ant-ternal attachment of the outer tie rod on the Steering Knuckle, attach the front lower control arm ball stud to the knuckle, and install the front wheel drive shaft bearing. Finally, reinstall the tire and gear, and bring the vehicle down.