How to replace the rear side door striker on Cadillac Catera?

The process of changing the rear side door lock striker begins by marking its position followed by unscrewing the striker along with spokeswoman components if present. Installation requires you to replace all removed spacers before correctly positioning the rear door striker against the matchmark. Loosening and then tightening the rear door striker screws to 20 Nm (15 lb ft) should be done after cleaning off the matchmark. A proper alignment of the rear door can be achieved by adjusting the striker as needed.

OEM Cadillac Catera Door Striker

Door Lock Striker

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

2 Door Strikers found

View related parts
Cadillac Catera Striker
Part Number: 90494202
Product Specifications
- Other Name: Lock, Rear Compartment Lid Or Tail Gate Latch
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1997-2001 Cadillac Catera | Base, Sport | 6 Cyl 3.0 L GAS
View related parts
Cadillac Catera Door Striker
Part Number: 9175115
Product Specifications
- Other Name: Striker, Front Side Door Lock; Striker; Striker, Door Lock Striker
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1997-2001 Cadillac Catera | Base, Sport | 6 Cyl 3.0 L GAS

Cadillac Catera Door Striker

Our website offers an extensive catalog of genuine Cadillac Catera Door Striker at unbeatable prices. Every OEM Cadillac Catera Door Striker comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!

Cadillac Catera Door Striker Parts Questions & Experts Answers

Door Striker
9175115
Q: How to replace the rear side door striker on Cadillac Catera?
A: The process of changing the rear side door lock striker begins by marking its position followed by unscrewing the striker along with spokeswoman components if present. Installation requires you to replace all removed spacers before correctly positioning the rear door striker against the matchmark. Loosening and then tightening the rear door striker screws to 20 Nm (15 lb ft) should be done after cleaning off the matchmark. A proper alignment of the rear door can be achieved by adjusting the striker as needed.