OEM Cadillac Catera Door Check

Cadillac Catera Door Check Parts and Q&A

• Door Check
  90563486
  Q: How to replace the front side door check link on Cadillac Catera?

  A:

  The replacement of front side door check links must begin by disabling the SIR system when the vehicle includes SIR side impact system equipment. After removing the front door trim panel you should remove the front door water deflector. Remove the Inflatable restraint side impact sensor mounting plate if it exists. The assembly procedure begins by discarding the links from the front door check to pillar bolt and nut before removing them from the front door check to inner door bolts to finish with disconnecting the front door check link from the door. To install the front door check link begins with attaching it to the door before you secure both inner door bolts and tighten the front door to check link bolt to 5 Nm (45 lb in). Secure both ends of the front door check link to pillar nut and bolt while torqueing them to 5 Nm (45 lb in). You should reattach the Inflatable restraint side impact sensor mounting plate before inserting the front door water deflector followed by the front door trim panel. Users should enable their SIR system only when their vehicle has the SIR side impact system.
• Door Check
  90564478
  Q: How to replace the rear side door check link on Cadillac Catera?

  A:

  Before installing the rear side door check you must remove the door trim panel together with the water deflector. Begin by detaching the check from the pin located at the center pillar followed by removal of the screw found inside the door. Seam the check through the access opening at the inner door panel area. Fitting the check requires passing it through the opening in the inner panel while tightening screws to 5 Nm (45 lb in). First install the pin then add the water deflector before putting on the door trim panel.