How to replace the Electronic Suspension Control Module on Cadillac Escalade ESV?

You should start by removing the right side interior trim panel when you need to replace the Electronic Suspension Control Module in Tahoe, Yukon or Escalade models. Start by removing the module from the bracket after disconnecting its electrical connectors along with removing its screw. Put the new module inside the bracket then fasten the screw before tightening it to 1.6 Nm (14 inch lbs.). You should reattach all electrical connectors to their corresponding location on the module. Module replacement requires special calibration through a scan tool connected to the data link connector and activation of the ignition ON while the engine rests followed by module selection under SPECIAL FUNCTIONS. Follow the instructions on the scan tool alongside techline terminal to complete RTD module programming from the SPECIAL FUNCTIONS choice on Recalibration. Users should access SPECIAL FUNCTIONS from the scan tool after programming where they must perform the ALC trimset following the instructions displayed on the screen. Complete the right side interior trim panel installation at the end of the procedure.

OEM Cadillac Escalade ESV Suspension Control Module

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

8 Suspension Control Modules found

View related parts
Cadillac Escalade ESV Control Module
Part Number: 84215186
$282.81 MSRP: $507.28
You Save: $224.47 (45%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Module Assembly-Electronic Suspension Control; Suspension Control Module; Module, Electronic Control Suspension
- Replaces: 84072358
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2017-2020 Cadillac Escalade ESV | Base, Luxury, Platinum, Premium, Premium Luxury | 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
View related parts
Cadillac Escalade ESV Control Module
Part Number: 25971218
$417.04 MSRP: $748.05
You Save: $331.01 (45%)
ADD TO CART
Product Specifications
- Other Name: Module Assembly-Electronic Suspension Control; Suspension Control Module; Module, Electronic Control Suspension
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2009-2014 Cadillac Escalade ESV | Base, Luxury, Platinum, Premium | 8 Cyl 6.2 L FLEX
View related parts
Cadillac Escalade ESV Control Module
Part Number: 25971217
$473.30 MSRP: $852.80
You Save: $379.50 (45%)
ADD TO CART
Product Specifications
- Other Name: Module Assembly-Electronic Suspension Control; Suspension Control Module; Module, Electronic Control Suspension
- Replaces: 15893732
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2008-2014 Cadillac Escalade ESV | Base, Luxury, Platinum, Premium | 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
View related parts
Cadillac Escalade ESV Control Module
Part Number: 23201680
$322.74 MSRP: $578.90
You Save: $256.16 (45%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Module Assembly-Electronic Suspension Control; Suspension Control Module; Module, Electronic Control Suspension
- Replaces: 23201678
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2015-2016 Cadillac Escalade ESV | Base, Luxury, Platinum, Premium | 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
View related parts
Cadillac Escalade ESV Control Module
Part Number: 15095294
$398.68 MSRP: $773.76
You Save: $375.08 (49%)
ADD TO CART
Product Specifications
- Other Name: Module, Electronic Control Suspension; Suspension Control Module
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2007 Cadillac Escalade ESV | Base | 8 Cyl 6.2 L GAS
View related parts
Cadillac Escalade ESV Auto Level Control
Part Number: 86827857
$824.34 MSRP: $1485.30
You Save: $660.96 (45%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Module Assembly-Auto Level Control; Compressor; Module, Electronic Control Suspension
- Replaced by: 85648138
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2022-2023 Cadillac Escalade ESV | Luxury, Premium Luxury, Premium Luxury Platinum, Sport, Sport Platinum, V | 6 Cyl 3.0 L DIESEL, 8 Cyl 6.2 L GAS
View related parts
Cadillac Escalade ESV Auto Level Control
Part Number: 84951816
$783.22 MSRP: $1411.20
You Save: $627.98 (45%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Module Assembly, Auto Level Control; Air Suspension Compressor; Compressor; Module, Electronic Control Suspension
- Replaced by: 85648139
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2021 Cadillac Escalade ESV | Luxury, Premium Luxury, Premium Luxury Platinum, Sport, Sport Platinum | 6 Cyl 3.0 L DIESEL, 8 Cyl 6.2 L GAS
View related parts
Cadillac Escalade ESV Control Module
Part Number: 15189546
Product Specifications
- Other Name: Module, Electronic Control Suspension
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2003-2006 Cadillac Escalade ESV | Base | 8 Cyl 6.0 L GAS

Cadillac Escalade ESV Suspension Control Module

Our website offers an extensive catalog of genuine Cadillac Escalade ESV Suspension Control Module at unbeatable prices. Every OEM Cadillac Escalade ESV Suspension Control Module comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!

Cadillac Escalade ESV Suspension Control Module Parts Questions & Experts Answers

Control Module
15189546
Q: How to replace the Electronic Suspension Control Module on Cadillac Escalade ESV?
A: You should start by removing the right side interior trim panel when you need to replace the Electronic Suspension Control Module in Tahoe, Yukon or Escalade models. Start by removing the module from the bracket after disconnecting its electrical connectors along with removing its screw. Put the new module inside the bracket then fasten the screw before tightening it to 1.6 Nm (14 inch lbs.). You should reattach all electrical connectors to their corresponding location on the module. Module replacement requires special calibration through a scan tool connected to the data link connector and activation of the ignition ON while the engine rests followed by module selection under SPECIAL FUNCTIONS. Follow the instructions on the scan tool alongside techline terminal to complete RTD module programming from the SPECIAL FUNCTIONS choice on Recalibration. Users should access SPECIAL FUNCTIONS from the scan tool after programming where they must perform the ALC trimset following the instructions displayed on the screen. Complete the right side interior trim panel installation at the end of the procedure.