Menu
×
Search Bar
Search by Part Number, Part Name, or Vehicle
My Garage
Cart
Help Center Contact Us
Make sure this part fits

GM 15189546
Control Module

2002-2006 GM

Customer Questions & Expert Answers (5)
GM 15189546 Control Module
  • Part Description
    Module, Electronic Control Suspension
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits

  • 15189546 Control Module is Ref No. 1 in the diagram below

    2005 Cadillac Escalade Control Module Diagram for 15189546
    The diagram listed above is for your reference. View diagram for your vehicle

    Related Parts for 15189546

  • Vehicle Fitment

    Year Make Model Trim Engine
    2004-2006 Cadillac EscaladeBase8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2003-2006 Cadillac Escalade ESVBase8 Cyl 6.0 L GAS
    2002-2006 Chevrolet Suburban 1500Base, LS, LT, LTZ, Z718 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2002-2006 Chevrolet Suburban 2500LS, LT8 Cyl 6.0 L GAS, 8 Cyl 8.1 L GAS
    2004-2006 Chevrolet TahoeBase, LS, LT, Z718 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS
    2004-2006 GMC YukonDenali, SL, SLE, SLT8 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2002-2006 GMC Yukon XL 1500Denali, SL, SLE, SLT8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2002-2006 GMC Yukon XL 2500SLE, SLT8 Cyl 6.0 L GAS, 8 Cyl 8.1 L GAS
    Warning: California's Proposition 65

  • Customer Questions & Expert Answers

    Q:
    Is this 15189546 designed for my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 15189546 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the Electronic Suspension Control Module on Cadillac Escalade ESV? Posted by Customer
    A:
    You should start by removing the right side interior trim panel when you need to replace the Electronic Suspension Control Module in Tahoe, Yukon or Escalade models. Start by removing the module from the bracket after disconnecting its electrical connectors along with removing its screw. Put the new module inside the bracket then fasten the screw before tightening it to 1.6 Nm (14 inch lbs.). You should reattach all electrical connectors to their corresponding location on the module. Module replacement requires special calibration through a scan tool connected to the data link connector and activation of the ignition ON while the engine rests followed by module selection under SPECIAL FUNCTIONS. Follow the instructions on the scan tool alongside techline terminal to complete RTD module programming from the SPECIAL FUNCTIONS choice on Recalibration. Users should access SPECIAL FUNCTIONS from the scan tool after programming where they must perform the ALC trimset following the instructions displayed on the screen. Complete the right side interior trim panel installation at the end of the procedure.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the Electronic Suspension Control Module on Chevrolet Suburban 1500? Posted by Customer
    A:
    The procedure for replacing the Electronic Suspension Control Module in Tahoe, Yukon and Escalade vehicles starts by removing right side interior trim panel then disconnecting electrical connectors from the module. Slide the module out of the bracket by removing the screw followed by taking it fully from the vehicle. Install the new module by placing it into the bracket followed by screw tightening at 1.6 Nm (14 inch lbs.) while paying attention to the Fastener Notice in Service Precautions. Attached the electrical connectors to their corresponding ports on the module. The procedure for recalibrating a replaced module includes connecting a scan tool to the Data Link Connector (DLC) while keeping the ignition ON with the engine OFF then selecting the SPECIAL FUNCTIONS for RTD module programming based on display instructions. Follow the displayed instructions on the scan tool under SPECIAL FUNCTIONS to execute the ALC trimset after the programming concludes. Reinstall the right side interior trim panel as the last step.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the Electronic Suspension Control Module on GMC Yukon XL 2500? Posted by Customer
    A:
    You should start by removing the right side interior trim panel when you need to replace the Electronic Suspension Control Module in Tahoe, Yukon or Escalade models. Start by removing the module from the bracket after disconnecting its electrical connectors along with removing its screw. Put the new module inside the bracket then fasten the screw before tightening it to 1.6 Nm (14 inch lbs.). You should reattach all electrical connectors to their corresponding location on the module. Module replacement requires special calibration through a scan tool connected to the data link connector and activation of the ignition ON while the engine rests followed by module selection under SPECIAL FUNCTIONS. Follow the instructions on the scan tool alongside techline terminal to complete RTD module programming from the SPECIAL FUNCTIONS choice on Recalibration. Users should access SPECIAL FUNCTIONS from the scan tool after programming where they must perform the ALC trimset following the instructions displayed on the screen. Complete the right side interior trim panel installation at the end of the procedure.
    Posted by ChevyPartsGiant Specialist
    Q:
    How to replace the Electronic Suspension Control Module on GMC Yukon? Posted by Customer
    A:
    You should start by removing the right side interior trim panel when you need to replace the Electronic Suspension Control Module in Tahoe, Yukon or Escalade models. Start by removing the module from the bracket after disconnecting its electrical connectors along with removing its screw. Put the new module inside the bracket then fasten the screw before tightening it to 1.6 Nm (14 inch lbs.). You should reattach all electrical connectors to their corresponding location on the module. Module replacement requires special calibration through a scan tool connected to the data link connector and activation of the ignition ON while the engine rests followed by module selection under SPECIAL FUNCTIONS. Follow the instructions on the scan tool alongside techline terminal to complete RTD module programming from the SPECIAL FUNCTIONS choice on Recalibration. Users should access SPECIAL FUNCTIONS from the scan tool after programming where they must perform the ALC trimset following the instructions displayed on the screen. Complete the right side interior trim panel installation at the end of the procedure.
    Posted by ChevyPartsGiant Specialist
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Control Module 15189546 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 15189546 Control Module is available in the market under the name GM Suspension Control Module. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 15189546 Control Module fits certain Chevrolet Tahoe, Suburban 1500, Suburban 2500 models, as well as GMC Yukon, Yukon XL 1500, Yukon XL 2500. Additionally, it is compatible with Cadillac Escalade, Escalade ESV models.
The original GM component designated by manufacturer part number 15189546 maintains top performance when functioning as the Module, Electronic Control Suspension unit. The component 15189546 is constructed from durable material and its dimensions span 10.7 x 7.3 x 3.3 inches while weighing 1.30 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. The part 15189546 has available replacement options. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.