How to replace the Turn Signal Switch on Cadillac Escalade ESV?

The first step for replacing a turn signal switch requires turning off the SIR system. Before working on the steering column wire harness assembly you must detach its abrasion sleeve's connector yet keep track of this part for reinstallation. Disconnect the wire harness assembly (Wire Harness Assembly) from the wire harness strap (Wire Harness Strap) before disassembling the turn signal and multifunction switch assembly connector from the SIR system coil connector. Pull out the Turn Signal and Multifunction Switch Assembly connectors from their position within the Bulkhead Connector. Extract the turn signal and multifunction switch assembly (Turn Signal and Multifunction Switch Assembly) from the steering column tilt head assembly by removing two pan head tapping screws (Pan Head Tapping Screw). When installing the turn signal and multifunction switch assembly (Turn Signal and Multifunction Switch Assembly) position it on the steering column tilt head assembly so the electrical contact touches the turn signal cancel cam assembly. Secure the assembly with the two pan head tapping screws (Pan Head Tapping Screw), tightening the top screw to 3 Nm (27 inch lbs.) Secure the two pan head tapping screws using 7 Nm torque (62 inch lbs.) for the side screw and 3 Nm (27 inch lbs.) for the top screw. Insert both connectors (Turn Signal and Multifunction Switch Assembly) into the Bulkhead Connector before connecting the turn signal and multifunction switch assembly connector to the SIR coil connector. Reposition the steering column wire harness assembly within the abrasion sleeve by aligning wires from the ignition lock cylinder case in their proper position before reinstalling the sleeve. Reinstall the wire harness assembly (Wire Harness Assembly) into the wire harness strap (Wire Harness Strap) before putting back upper and lower trim covers and activating the SIR system.

OEM Cadillac Escalade ESV Turn Signal Switch

Turn Signal Indicator Switch

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

9 Turn Signal Switches found

View related parts
Cadillac Escalade ESV Turn Signal Switch
Part Number: 15849314
$44.19 MSRP: $64.90
You Save: $20.71 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch, Headlamp/Fog Lamp/Turn Signal; Multi Purpose Switch; Combination Switch; Switch, Windshield Wiper & Washer Control; Switch, Turn Signal Lamp; Switch, Headlamp Dimmer
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2007-2014 Cadillac Escalade ESV | Base, Luxury, Platinum, Premium | 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
View related parts
Cadillac Escalade ESV Turn Signal Switch
Part Number: 12450067
$145.12 MSRP: $298.20
You Save: $153.08 (52%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch, Headlamp Dimmer; Multi-Function Switch; Multi Purpose Switch; Multifunction Switch; Combination Switch; Switch, Windshield Wiper & Washer Control; Switch, Turn Signal Lamp
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2003-2006 Cadillac Escalade ESV | Base | 8 Cyl 6.0 L GAS
View related parts
Cadillac Escalade ESV Turn Signal Switch
Part Number: 84441461
$36.29 MSRP: $53.29
You Save: $17.00 (32%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch Assembly-Turn Signal; Multi Purpose Switch; Signal Lever; Switch, Turn Signal Lamp
- Replaces: 23163205, 23381960
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2015-2020 Cadillac Escalade ESV | Base, Luxury, Platinum, Premium, Premium Luxury | 8 Cyl 6.2 L FLEX, 8 Cyl 6.2 L GAS
View related parts
Cadillac Escalade ESV Signal Switch
Part Number: 13552605
$9.95 MSRP: $14.80
You Save: $4.85 (33%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch Assembly-Turn Signal; Switch, Turn Signal Lamp
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2023 Cadillac Escalade ESV | Luxury, Premium Luxury, Premium Luxury Platinum, Sport, Sport Platinum, V | 6 Cyl 3.0 L DIESEL, 8 Cyl 6.2 L GAS
View related parts
Cadillac Escalade ESV Turn Signal Switch
Part Number: 13550285
$39.65 MSRP: $59.01
You Save: $19.36 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch Assembly-Turn Signal; Switch, Turn Signal Lamp
- Replaces: 13545938
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2022-2023 Cadillac Escalade ESV | Luxury, Premium Luxury, Premium Luxury Platinum, Sport, Sport Platinum, V | 6 Cyl 3.0 L DIESEL, 8 Cyl 6.2 L GAS
View related parts
Cadillac Escalade ESV Turn Signal Switch
Part Number: 13545218
$31.00 MSRP: $46.14
You Save: $15.14 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch Assembly-Turn Signal; Multi Purpose Switch; Multifunction Switch; Signal Switch; Switch, Turn Signal Lamp
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2021 Cadillac Escalade ESV | Luxury, Premium Luxury, Premium Luxury Platinum, Sport, Sport Platinum | 6 Cyl 3.0 L DIESEL, 8 Cyl 6.2 L GAS
View related parts
Cadillac Escalade ESV Turn Signal Switch
Part Number: 13539318
$31.00 MSRP: $46.14
You Save: $15.14 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch Assembly-Turn Signal; Multi Purpose Switch; Multifunction Switch; Signal Switch; Switch, Turn Signal Lamp
- Replaced by: 13545218
- Replaces: 13533355
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2021 Cadillac Escalade ESV | Luxury, Premium Luxury, Premium Luxury Platinum, Sport, Sport Platinum | 6 Cyl 3.0 L DIESEL, 8 Cyl 6.2 L GAS
View related parts
Cadillac Escalade ESV Audio Switch
Part Number: 13540156
$50.25 MSRP: $89.74
You Save: $39.49 (44%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch, Radio Control; Multi Purpose Switch; Signal Switch; Switch
- Replaced by: 13553602
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2021-2023 Cadillac Escalade ESV | Luxury, Premium Luxury, Premium Luxury Platinum, Sport, Sport Platinum, V | 6 Cyl 3.0 L DIESEL, 8 Cyl 6.2 L GAS
View related parts
Cadillac Escalade ESV Turn Signal Switch
Part Number: 12450066
$131.50 MSRP: $246.94
You Save: $115.44 (47%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Switch Assembly, Turn Signal & Headlamp Dimmer, Wiper & Washer (W/Lever); Multi Purpose Switch; Combination Switch; Switch, Windshield Wiper & Washer Control; Switch, Turn Signal Lamp; Switch, Headlamp Dimmer
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2003-2006 Cadillac Escalade ESV | Base | 8 Cyl 6.0 L GAS

Cadillac Escalade ESV Turn Signal Switch

Our website offers an extensive catalog of genuine Cadillac Escalade ESV Turn Signal Switch at unbeatable prices. Every OEM Cadillac Escalade ESV Turn Signal Switch comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!

Cadillac Escalade ESV Turn Signal Switch Parts Questions & Experts Answers

Turn Signal Switch
12450067
Q: How to replace the Turn Signal Switch on Cadillac Escalade ESV?
A: The first step for replacing a turn signal switch requires turning off the SIR system. Before working on the steering column wire harness assembly you must detach its abrasion sleeve's connector yet keep track of this part for reinstallation. Disconnect the wire harness assembly (Wire Harness Assembly) from the wire harness strap (Wire Harness Strap) before disassembling the turn signal and multifunction switch assembly connector from the SIR system coil connector. Pull out the Turn Signal and Multifunction Switch Assembly connectors from their position within the Bulkhead Connector. Extract the turn signal and multifunction switch assembly (Turn Signal and Multifunction Switch Assembly) from the steering column tilt head assembly by removing two pan head tapping screws (Pan Head Tapping Screw). When installing the turn signal and multifunction switch assembly (Turn Signal and Multifunction Switch Assembly) position it on the steering column tilt head assembly so the electrical contact touches the turn signal cancel cam assembly. Secure the assembly with the two pan head tapping screws (Pan Head Tapping Screw), tightening the top screw to 3 Nm (27 inch lbs.) Secure the two pan head tapping screws using 7 Nm torque (62 inch lbs.) for the side screw and 3 Nm (27 inch lbs.) for the top screw. Insert both connectors (Turn Signal and Multifunction Switch Assembly) into the Bulkhead Connector before connecting the turn signal and multifunction switch assembly connector to the SIR coil connector. Reposition the steering column wire harness assembly within the abrasion sleeve by aligning wires from the ignition lock cylinder case in their proper position before reinstalling the sleeve. Reinstall the wire harness assembly (Wire Harness Assembly) into the wire harness strap (Wire Harness Strap) before putting back upper and lower trim covers and activating the SIR system.

Related Cadillac Escalade ESV Parts

Browse Cadillac Escalade ESV Turn Signal Switch by Years

2023 2022 2021 2020 2019 2018 2017 2016 2015 2014 2013 2012 2011 2010 2009 2008 2007 2006 2005 2004 2003