OEM Chevrolet Astro Door Lock Switch

Chevrolet Astro Door Lock Switch Parts Questions & Experts Answers

• Lock Switch
  15151430
  Q: How to service and repair the power door lock switch on Chevrolet Astro?

  A: A proper repair or servicing of the power Door Lock Switch requires initial removal of the armrest screws and the armrest (YC5) followed by its detachment. Remove the first component before starting the Door Lock Switch service procedure. The lock lever escutcheon will become accessible after pulling out the escutcheon from its front edge position. The upper corner trim needs to be pulled from the top edge before pivoting it downward to escape the trim panel tab (YC6 and YC7). Start the process by extracting the screws under the assist handle caps before removing the handle screws to detach it from the door. Separate and remove the screw at the front access of the accessory switch mount plate before extracting the plate from the trim panel. When working on the switches disconnect their electrical connectors from the plate as required. To install the accessory switch mount plate first plug electrical connectors to their respective switches then attach the plate onto the trim panel while fastening the front edge screw to 5 n.m (44 lb in). Place the assist handle onto the door followed by installation of its screws while tightening them to 5 n.m (44 lb in). The assist handle installation requires replacing the screw caps and placing the tab into the door trim panel slot before setting the fastener into position at the top corner (YC6 and YC7). Mount the lock lever escutcheon beginning at its back part before putting in the optional window handle. Insert and tighten the armrest screws (YC5) to 5 n.m (44 lb in).