How to replace the Cup Holder in a luxury car on Chevrolet Avalanche 1500?

The first step to replace a Cup Holder in luxury vehicles requires removing upper trim bezels from the Center Console. A flatbladed tool should be used to separate the console from the Cup Holder assembly through clipping while removing the assembly. Start by taking off the wire connector from the Cup Holder followed by removing the Cup Holder from the console assembly. You should position the Cup Holder assembly on top of the console and connect the wire connector for installation. Complete the set up of retaining clips by pushing on each assembly corner before installing the upper trim bezel.

OEM Chevrolet Avalanche 1500 Cup Holder

Drink Holder

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Cup Holders found

View related parts
Chevrolet Avalanche 1500 Cup Holder
Part Number: 88986676
Product Specifications
- Other Name: Holder, Seat Separator Console; Rear Cupholder
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2003-2006 Chevrolet Avalanche 1500 | Base, LS, LT, North Face, On Road Edition, WBH, Z66, Z71 | 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS
View related parts
Chevrolet Avalanche 1500 Cup Holder
Part Number: 88986674
Product Specifications
- Other Name: Holder, Seat Separator Console; Rear Cupholder
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2003-2006 Chevrolet Avalanche 1500 | Base, LS, LT, North Face, On Road Edition, WBH, Z66, Z71 | 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS
View related parts
Chevrolet Avalanche 1500 Cup Holder Insert
Part Number: 88979020
Product Specifications
- Other Name: Liner, Seat Cushion; Liner
- Position: Driver Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2002-2006 Chevrolet Avalanche 1500 | Base, LS, LT, North Face, On Road Edition, WBH, Z66, Z71 | 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS
View related parts
Chevrolet Avalanche 1500 Cup Holder
Part Number: 88938361
Product Specifications
- Other Name: Holder, Seat Cushion
- Position: Front Center
- Replaces: 12474260
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2003-2006 Chevrolet Avalanche 1500 | Base, LS, LT, North Face, On Road Edition, WBH, Z66, Z71 | 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS
View related parts
Chevrolet Avalanche 1500 Cup Holder
Part Number: 88938356
Product Specifications
- Other Name: Holder, Seat Belt; Holder, Seat Cushion
- Position: Front Center
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2002-2006 Chevrolet Avalanche 1500 | Base, LS, LT, North Face, On Road Edition, WBH, Z66, Z71 | 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS
View related parts
Chevrolet Avalanche 1500 Cup Holder
Part Number: 88938355
Product Specifications
- Other Name: Holder, Seat Cushion
- Position: Front Center
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2002 Chevrolet Avalanche 1500 | Base, North Face, On Road Edition, Z71 | 8 Cyl 5.3 L GAS

Chevrolet Avalanche 1500 Cup Holder

Our website offers an extensive catalog of genuine Chevrolet Avalanche 1500 Cup Holder at unbeatable prices. Every OEM Chevrolet Avalanche 1500 Cup Holder comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!

Chevrolet Avalanche 1500 Cup Holder Parts Questions & Experts Answers

Cup Holder
88938356
Q: How to replace the Cup Holder in a luxury car on Chevrolet Avalanche 1500?
A: The first step to replace a Cup Holder in luxury vehicles requires removing upper trim bezels from the Center Console. A flatbladed tool should be used to separate the console from the Cup Holder assembly through clipping while removing the assembly. Start by taking off the wire connector from the Cup Holder followed by removing the Cup Holder from the console assembly. You should position the Cup Holder assembly on top of the console and connect the wire connector for installation. Complete the set up of retaining clips by pushing on each assembly corner before installing the upper trim bezel.