Make sure this part fits

GM 88979020
Cup Holder Insert

2000-2007 GM

Customer Questions & Expert Answers (15)
GM 88979020 Cup Holder Insert
  • Part Description
    Liner, Seat Cushion
  • Position
    Driver Side
  • Manufacturer
    General Motors
  • Manufacturer's Notes
    This part is discontinued.
Make sure this part fits
  • Vehicle Fitment

    Year Make Model Trim Engine
    2002-2006 Cadillac EscaladeBase8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2003-2006 Cadillac Escalade ESVBase8 Cyl 6.0 L GAS
    2002-2006 Cadillac Escalade EXTBase8 Cyl 6.0 L GAS
    2002-2006 Chevrolet Avalanche 1500Base, LS, LT, North Face, On Road Edition, WBH, Z66, Z718 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS
    2002-2006 Chevrolet Avalanche 2500Base, LS, LT8 Cyl 8.1 L GAS
    2005-2006 Chevrolet Silverado 1500Hybrid8 Cyl 5.3 L FULL HYBRID EV-GAS (FHEV)
    2007 Chevrolet Silverado 1500 ClassicHybrid8 Cyl 5.3 L FULL HYBRID EV-GAS (FHEV)
    2002-2006 Chevrolet Suburban 1500Base, LS, LT, LTZ, Z718 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS, 8 Cyl 6.0 L GAS
    2002-2006 Chevrolet Suburban 2500LS, LT8 Cyl 6.0 L GAS, 8 Cyl 8.1 L GAS
    2000-2006 Chevrolet TahoeBase, LS, LT, Z718 Cyl 4.8 L GAS, 8 Cyl 5.3 L FLEX, 8 Cyl 5.3 L GAS
    View More
    Warning: California's Proposition 65
  • Customer Questions & Expert Answers

    Q:
    Is 88979020 compatible with my car? Posted by ChevyPartsGiant Specialist
    A:
    Please Select Your Vehicle model to see if part number 88979020 is suitable before ordering.
    Posted by ChevyPartsGiant Specialist
    Q:
    What is the first step to replace the front seat cupholder for the 2002 Cadillac Escalade? Posted by Customer
    A:
    First, remove the center seat while ensuring eye protection is worn to prevent personal injury during the drilling of rivets.
    Posted by ChevyPartsGiant Specialist
    See vehicle specific detailed answers for this Cup Holder
    Q:
    What is the first step for installation of the new cupholder for the 2004 Cadillac Escalade ESV? Posted by Customer
    A:
    Place one of the hinges in the opening in the panel.
    Posted by ChevyPartsGiant Specialist
    See vehicle specific detailed answers for this Cup Holder
    Q:
    What is the first step to replace the front seat cupholder for the 2006 Cadillac Escalade EXT? Posted by Customer
    A:
    First, remove the center seat while ensuring eye protection is worn to prevent personal injury during the drilling of rivets.
    Posted by ChevyPartsGiant Specialist
    See vehicle specific detailed answers for this Cup Holder
    Q:
    How do you install the new cupholder for the 2003 Chevrolet Avalanche 1500? Posted by Customer
    A:
    Begin by placing the new cupholder in position, then secure it by installing the rivets that hold the cupholder to the bottom of the center seat.
    Posted by ChevyPartsGiant Specialist
    See vehicle specific detailed answers for this Cup Holder
    Q:
    What should be done after removing the center seat for the 2006 Chevrolet Avalanche 2500? Posted by Customer
    A:
    Take out the rivets that secure the cupholder from the bottom of the center seat and then remove the cupholder itself.
    Posted by ChevyPartsGiant Specialist
    See vehicle specific detailed answers for this Cup Holder
    Q:
    What should be done after removing the center seat for the 2007 Chevrolet Silverado 1500 Classic? Posted by Customer
    A:
    Take out the rivets that secure the cupholder from the bottom of the center seat and then remove the cupholder itself.
    Posted by ChevyPartsGiant Specialist
    See vehicle specific detailed answers for this Cup Holder
    Q:
    What is the final step after installing the new cupholder for the 2005 Chevrolet Silverado 1500? Posted by Customer
    A:
    Reinstall the center seat.
    Posted by ChevyPartsGiant Specialist
    See vehicle specific detailed answers for this Cup Holder
    Q:
    How do you replace the rear cupholder for the 2004 Chevrolet Suburban 1500? Posted by Customer
    A:
    First lower the cupholder, then insert a flat bladed tool between the cupholder hinge and the end panel to pry off the cupholder from the console.
    Posted by ChevyPartsGiant Specialist
    See vehicle specific detailed answers for this Cup Holder
    Q:
    How do you install the new cup holder for the 2002 Chevrolet Suburban 2500? Posted by Customer
    A:
    Position the cup holder back into the vehicle and snap the tabs to secure it to the floor console.
    Posted by ChevyPartsGiant Specialist
    See vehicle specific detailed answers for this Cup Holder
    Q:
    How do you open the cup holder for replacement for the 2000 Chevrolet Tahoe? Posted by Customer
    A:
    Pull down from the rear of the floor console.
    Posted by ChevyPartsGiant Specialist
    See vehicle specific detailed answers for this Cup Holder
    Q:
    What should you do after installing the cupholder for the 2007 GMC Sierra 1500 Classic? Posted by Customer
    A:
    Inspect the assembly to ensure correct operation.
    Posted by ChevyPartsGiant Specialist
    See vehicle specific detailed answers for this Cup Holder
    Q:
    How do you install the new cupholder for the 2004 GMC Yukon? Posted by Customer
    A:
    Place the new cupholder in position, secure it with the rivets at the bottom of the center seat, and finally reinstall the center seat.
    Posted by ChevyPartsGiant Specialist
    See vehicle specific detailed answers for this Cup Holder
    Q:
    What is the final step after installing the new cupholder for the 2005 GMC Sierra 1500? Posted by Customer
    A:
    Reinstall the center seat.
    Posted by ChevyPartsGiant Specialist
    See vehicle specific detailed answers for this Cup Holder
    Q:
    What should be done after removing the center seat for the 2004 GMC Yukon XL 2500? Posted by Customer
    A:
    Take out the rivets that secure the cupholder from the bottom of the center seat and then remove the cupholder itself.
    Posted by ChevyPartsGiant Specialist
    See vehicle specific detailed answers for this Cup Holder
    If you have any questions about this product, please don't hesitate to ask us. We will be happy to help you!

OEM GM Cup Holder Insert 88979020 Designed for Proper Fit and Performance

Original OEM GM parts deliver superior quality and meet all performance standards needed for optimal automotive operation. The authentic part identified by 88979020 Cup Holder Insert is available in the market under the name GM Cup Holder. This genuine product has a full warranty coverage from the manufacturer available at all authorized GM dealers throughout the United States. This part 88979020 Cup Holder Insert fits certain Chevrolet Tahoe, Silverado 1500, Suburban 1500 models, as well as GMC Sierra 1500, Yukon, Yukon XL 1500. Additionally, it is compatible with Cadillac Escalade, Escalade ESV, Escalade EXT models.
The original GM component designated by manufacturer part number 88979020 maintains top performance when functioning as the Liner, Seat Cushion unit at its Driver Side. The component 88979020 is constructed from durable material and its dimensions span 4.3 x 4.1 x 4.2 inches while weighing 0.40 Pounds. The Direct Replacement component is ready in New condition to ensure full compatibility with your vehicle system. This component receives the designation of Liner. The part 88979020 has available replacement options. GM manufacturer provides a warranty that ensures reliable operation of this product. The Shipping Policy and Return Policy pages outline complete details regarding shipping procedures and return processes.
If you want to save money in the long run on maintenance and repairs, you should choose OEM products because they're of the top level of durability. Are you on the quest of finding GM parts, our site is worth a visit. We stock an endless selection of high-quality GM components including things like ignition coils all the way through to fan shrouds and all at prices that can not be matched. You have nothing to worry about because all our OEM parts are covered with a manufacturer warranty, which guarantees superior quality and value.