OEM Chevrolet Avalanche 2500 Antenna Cable

Chevrolet Avalanche 2500 Antenna Cable Parts Questions & Experts Answers

• Antenna Cable
  15829166
  Q: How to replace the radio antenna cable from the radio to the module on Chevrolet Avalanche 2500?

  A: To replace the radio antenna module cable from the radio to the module, start by removing the I/P trim panel, and after that, lower the headliner. Disconnect the electrical connector by loosening the bolt that retains the radio antenna module and disconnect cable from radio antenna module. Then remove cable clips from the roof and A-pillar, followed by cable disconnecting cable from the radio and the electrical wire connector . Once the radio cable has been removed from the vehicle, cable clips can be put back on the A-pillar and attachment of electrical wire connector is made. Next, connect cable to the radio and reinstall cable clips to the roof. Connect the cable to the radio antenna module and then attach a wire connector to the radio antenna module. Finally, install the bolt to hold the radio antenna module to the roof and tighten it to 9 N.m (80 lb in), then reinstall the headliner as well as the I/P trim panel.