OEM Chevrolet Avalanche 2500 Brake Pad

Chevrolet Avalanche 2500 Brake Pad Parts Questions & Experts Answers

• Brake Pads, Front
  19432941
  Q: How to replace the front brake pads on Chevrolet Avalanche 2500?

  A: Begin by checking the brake master cylinder reservoir for fluid level before starting front Brake Pad replacement. The fluid level should be situated midway between markings on the brake master cylinder reservoir tank to avoid removal yet relocate it towards the midway if the level becomes excessive. Lift your vehicle while supporting its frame and remove the tire and wheel assembly from beneath the vehicle. When the hydraulic flexible brake hose stays connected to the caliper mount during service the technician needs to support the brake caliper with heavy mechanic's wire or equivalent until it separates from its mount to avoid damaging or leaking components. Separate the caliper from the mounting bracket keeping the hydraulic brake flexible hose intact before removing the brake pads from the caliper mounting bracket and eliminating the anti-rattle clips. The installation of anti-rattle clips must begin inside the caliper mounting bracket as well as inside the new brake pads while placing the inner pad-1 wear indicator and outer pad-2 wear indicators. After installing the brake caliper place the tire and wheel assembly back on then remove the safety stands before lowering the vehicle. Use the brake pedal gradually until you reach two-thirds of its extent and slowly let go of the pedal before repeating this procedure to achieve proper Brake Caliper Piston and Brake Pad seat. The last step involves adding pristine brake fluid at its specified measurements followed by rotor and Brake Pad surface smoothening.