How to replace the Release Hood Cable on Chevrolet Aveo?

The first step to replace the Hood Cable requires removing the hood release handle until you can access the screws which permit the removal of both handle and screws from the instrument panel. You need to raise the vehicle and securely support it by following all instructions in the vehicle lifting and jacking notice. Start by taking out the front wheeled and screws mounting the splash shield after which lift the hood. Begin by detaching the hood secondary latch by removing its screws and breaking the cable connection to the hood release handle before removing the cable from within the vehicle compartment. Begin cable installation by inserting it inside the vehicle before routing it to the hood release handle while following the fastener notice. Fasten the screws that hold the hood secondary latch before tightening the hood latch screws to 8 n.m (71 lb in). Install the front wheel after securing the splash shield with screws which should be tightened to 1.5 n.m (13 lb in). The hood release installation ends with screwing the hood component into the instrument panel at 1.5 n.m (13 lb in).

OEM Chevrolet Aveo Hood Cable

Hood Release Cable

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

6 Hood Cables found

View related parts
Chevrolet Aveo Release Handle, Black
Part Number: 96476604
$15.89 MSRP: $23.65
You Save: $7.76 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Handle, Hood Latch
- Replaces: 96449523
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2007-2011 Chevrolet Aveo | LS, LT | 4 Cyl 1.6 L GAS
View related parts
Chevrolet Aveo Release Handle, Beige
Part Number: 96476607
$7.44 MSRP: $14.95
You Save: $7.51 (51%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Handle, Hood Primary Latch Release Cable *Beige; Handle, Hood Latch
- Replaces: 96615275
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2007-2011 Chevrolet Aveo | LS, LT | 4 Cyl 1.6 L GAS
View related parts
Chevrolet Aveo Release Cable
Part Number: 96649313
$48.75 MSRP: $72.56
You Save: $23.81 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Cable, Hood Latch; Hood Release Cable
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2007-2011 Chevrolet Aveo | LS, LT | 4 Cyl 1.6 L GAS
View related parts
Chevrolet Aveo Release Cable
Part Number: 96540930
Product Specifications
- Other Name: Cable Assembly, Hood Primary Latch Release; Hood Release Cable; Cable, Hood Latch
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2004-2008 Chevrolet Aveo | Base, LS, LT, Special Value | 4 Cyl 1.6 L GAS
View related parts
Chevrolet Aveo Release Handle
Part Number: 96494275
Product Specifications
- Other Name: Handle, Hood Latch
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2004-2005 Chevrolet Aveo | Base, LS, LT, Special Value | 4 Cyl 1.6 L GAS
View related parts
Chevrolet Aveo Release Handle
Part Number: 96442498
Product Specifications
- Other Name: Handle, Hood Latch
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2006 Chevrolet Aveo | LS, LT, Special Value | 4 Cyl 1.6 L GAS

Chevrolet Aveo Hood Cable

Our website offers an extensive catalog of genuine Chevrolet Aveo Hood Cable at unbeatable prices. Every OEM Chevrolet Aveo Hood Cable comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!

Chevrolet Aveo Hood Cable Parts Questions & Experts Answers

Release Cable
96540930
Q: How to replace the Release Hood Cable on Chevrolet Aveo?
A: The first step to replace the Hood Cable requires removing the hood release handle until you can access the screws which permit the removal of both handle and screws from the instrument panel. You need to raise the vehicle and securely support it by following all instructions in the vehicle lifting and jacking notice. Start by taking out the front wheeled and screws mounting the splash shield after which lift the hood. Begin by detaching the hood secondary latch by removing its screws and breaking the cable connection to the hood release handle before removing the cable from within the vehicle compartment. Begin cable installation by inserting it inside the vehicle before routing it to the hood release handle while following the fastener notice. Fasten the screws that hold the hood secondary latch before tightening the hood latch screws to 8 n.m (71 lb in). Install the front wheel after securing the splash shield with screws which should be tightened to 1.5 n.m (13 lb in). The hood release installation ends with screwing the hood component into the instrument panel at 1.5 n.m (13 lb in).