How to replace the rear brake pads on Chevrolet Blazer?

Before replacing the rear brake pads check the brake fluid level in the master cylinder reservoir. When the level is at or near the middle mark between max and min values no fluid need be removed but when the level surpasses that point use a brake fluid extractor to bring the fluid down. Lift the vehicle and take off the tire wheel unit. Secure the c-clamp on top of the brake caliper housing over the backside of the outboard pad. Gradually build pressure until the piston reaches the caliper bore then remove the clamp. After detaching the brake caliper assembly from its mounting bracket clean both the brake pads and parts with denatured alcohol followed by drying them using filtered non-lubricated compressed air. Check the brake caliper for any issues after taking off the rear brake pads and anti/rattle spring pair along with springs from both mounting blocked and the brake caliper. Replace the old anti/rattle springs and install the new brake pads along with new anti/rattle springs onto the mounting bracket. Connect the brake caliper anti/rattle spring then reinstall the brake caliper unit on its mounting bracket. Bring down your car and refill the Brake Master Cylinder to the right amount. Depress the Brake Pedal from rest gradually until it reaches 2/3 of its total range then lift up slowly. Press the Brake Pedal twice for 15 seconds to push the brake caliper pistons correctly into place. Finally, burnish the new brake pads.

OEM Chevrolet Blazer Brake Pad

Disc Brake Pad Set

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

7 Brake Pads found

View related parts
Chevrolet Blazer Brake Pads
Part Number: 84769879
$88.29 MSRP: $172.85
You Save: $84.56 (49%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pad Kit, Brake; Disc Brake Hardware Kit; Rear Pads
- Position: Rear
- Replaces: 23344214, 84757793
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2019-2020 Chevrolet Blazer | Base, L, LT, Premier, RS | 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.6 L GAS
View related parts
Chevrolet Blazer Brake Pads
Part Number: 85520396
$118.99 MSRP: $230.94
You Save: $111.95 (49%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pad Kit, Brake; Disc Brake Hardware Kit; Front Pads
- Position: Front
- Replaced by: 85619135
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2021-2024 Chevrolet Blazer | L, LT, Premier, RS | 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.6 L GAS
View related parts
Chevrolet Blazer Brake Pads
Part Number: 84794110
$70.94 MSRP: $137.70
You Save: $66.76 (49%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Pad Kit, Brake; Disc Brake Hardware Kit; Rear Pads
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2021-2024 Chevrolet Blazer | L, LT, Premier, RS | 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.6 L GAS
View related parts
Chevrolet Blazer Brake Pads
Part Number: 85153469
$99.53 MSRP: $208.44
You Save: $108.91 (53%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Pad Kit, Brake; Front Pads
- Replaces: 22972580, 84323140, 84822406
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2019-2020 Chevrolet Blazer | Base, L, LT, Premier, RS | 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.6 L GAS
View related parts
Chevrolet Blazer Brake Pads, Front
Part Number: 19152030
Product Specifications
- Other Name: Pad Kit, Front Disc Brake; Disc Brake Hardware Kit; Front Pads; Pad Kit, Brake; Pad, Brake
- Position: Front
- Replaces: 18040199, 12376257, 18024836, 18026296, 18019389
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1995-2005 Chevrolet Blazer | Base, LS, LT, Trailblazer, Xtreme, ZR2 | 6 Cyl 4.3 L GAS
View related parts
Chevrolet Blazer Brake Pads, Front
Part Number: 18029863
Product Specifications
- Other Name: Pad Kit, Front Disc Brake; Disc Brake Hardware Kit; Front Pads; Pad Kit, Brake
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1998-2005 Chevrolet Blazer | Base, LS, LT, Trailblazer, Xtreme, ZR2 | 6 Cyl 4.3 L GAS
View related parts
Chevrolet Blazer Brake Pads
Part Number: 18026156
Product Specifications
- Other Name: Pad Kit, Brake; Disc Brake Hardware Kit; Rear Pads
- Position: Rear
- Replaces: 18025475
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1995-2005 Chevrolet Blazer | Base, LS, LT, Trailblazer, Xtreme, ZR2 | 6 Cyl 4.3 L GAS

Chevrolet Blazer Brake Pad

Our website offers an extensive catalog of genuine Chevrolet Blazer Brake Pad at unbeatable prices. Every OEM Chevrolet Blazer Brake Pad comes with a manufacturer's warranty, an easy return policy, and rapid delivery service. Don't miss out on this great opportunity!

Chevrolet Blazer Brake Pad Parts Questions & Experts Answers

Brake Pads
18026156
Q: How to replace the rear brake pads on Chevrolet Blazer?
A: Before replacing the rear brake pads check the brake fluid level in the master cylinder reservoir. When the level is at or near the middle mark between max and min values no fluid need be removed but when the level surpasses that point use a brake fluid extractor to bring the fluid down. Lift the vehicle and take off the tire wheel unit. Secure the c-clamp on top of the brake caliper housing over the backside of the outboard pad. Gradually build pressure until the piston reaches the caliper bore then remove the clamp. After detaching the brake caliper assembly from its mounting bracket clean both the brake pads and parts with denatured alcohol followed by drying them using filtered non-lubricated compressed air. Check the brake caliper for any issues after taking off the rear brake pads and anti/rattle spring pair along with springs from both mounting blocked and the brake caliper. Replace the old anti/rattle springs and install the new brake pads along with new anti/rattle springs onto the mounting bracket. Connect the brake caliper anti/rattle spring then reinstall the brake caliper unit on its mounting bracket. Bring down your car and refill the Brake Master Cylinder to the right amount. Depress the Brake Pedal from rest gradually until it reaches 2/3 of its total range then lift up slowly. Press the Brake Pedal twice for 15 seconds to push the brake caliper pistons correctly into place. Finally, burnish the new brake pads.