OEM Chevrolet Blazer Fuel Pump Strainer

Chevrolet Blazer Fuel Pump Strainer Parts Questions & Experts Answers

• Fuel Strainer
  25314928
  Q: How to replace the Fuel Pump Strainer on Chevrolet Blazer?

  A: The replacement of a Fuel Pump Strainer requires users to disconnect the negative Battery Cable followed by fuel system pressure relief operations before removing the Fuel Tank together with the fuel sender assembly. Before you start remember to note down the position of the Fuel Pump Strainer on the fuel sender because you will need to support the assembly with one hand and remove it from the strainer with your other hand to check it. After inspection throw out the strainer because it needs replacement if damaged. The strainer replacement requires cleaning of the Fuel Tank if it shows signs of contamination. To install a new Fuel Pump Strainer, mount it correctly on the bottom of the fuel sender before reinstalling both the fuel sender assembly along with the Fuel Tank. The necessary procedure includes refueling the tank and then installing the fuel filler cap followed by negative Battery Cable restoration. Look for fuel leaks while conducting the check by turning on ignition for 2 seconds followed by 10 seconds off then turning ignition on again.