How to replace the Tailgate Lift Support on Chevrolet Blazer?

Begin your tailgate shock/support replacement process by opening and supporting the endgate. The endgate struts' retainer clips need to be lifted using a small flat-bladed tool before removing the upper end from the Ball Joint then the lower end. The next step involves taking out the endgate struts from the endgate assembly. To install the new endgate struts simply place them onto the endgate then push the upper end into the Ball Joint before fully seating it followed by securing the lower end. The installation process ends when both ends of the endgate struts reach their secure position. At that point, remove the support fixture from the endgate for closure.

OEM Chevrolet Blazer Tailgate Lift Support

Liftgate Strut

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

10 Tailgate Lift Supports found

View related parts
Chevrolet Blazer Strut Part Number: 15678975
$50.98 MSRP: $79.83
You Save: $28.85 (37%)
Ships in 1-2 Business Days
ADD TO CART
Product Specifications
- Other Name: Strut, End Gate Window; Back Glass Lift Support; Lift Support; Strut, End Gate Support
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1995-2005 Chevrolet Blazer | Base, LS, LT, Xtreme, ZR2 | 6 Cyl 4.3 L GAS
View related parts
Chevrolet Blazer Lift Cylinder, Passenger Side Part Number: 84829194
$22.24 MSRP: $34.83
You Save: $12.59 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Strut, Lift Gate; Strut, Rear Compartment Lid Or Tail Gate Counter Balance
- Position: Passenger Side
- Replaces: 42439813
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2019-2024 Chevrolet Blazer | Base, L, LT, Premier, RS | 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.6 L GAS
View related parts
Chevrolet Blazer Lift Cylinder, Driver Side Part Number: 84829193
$23.31 MSRP: $36.50
You Save: $13.19 (37%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Strut, Lift Gate; Strut, Rear Compartment Lid Or Tail Gate Counter Balance
- Position: Driver Side
- Replaced by: 85612546
- Replaces: 42439811
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2019-2024 Chevrolet Blazer | Base, L, LT, Premier, RS | 4 Cyl 2.0 L GAS, 4 Cyl 2.5 L GAS, 6 Cyl 3.6 L GAS
View related parts
Chevrolet Blazer Strut, Rear Part Number: 15708521
Product Specifications
- Other Name: Strut, Rear Compartment Lid Or Tail Gate Counter Balance; Back Glass Lift Support; Liftgate Lift Support; Lift Support; Strut, End Gate Support
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1997-2004 Chevrolet Blazer | Base, LS, LT, Trailblazer, Xtreme, ZR2 | 6 Cyl 4.3 L GAS
View related parts
Chevrolet Blazer Support Strut, Passenger Side Part Number: 15003616
Product Specifications
- Other Name: Strut, End Gate Support; Liftgate Lift Support; Door Lift Support; Lift Support
- Position: Passenger Side
- Replaces: 15149360
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1997-2004 Chevrolet Blazer | Base, LS, LT, Trailblazer, Xtreme, ZR2 | 6 Cyl 4.3 L GAS
View related parts
Chevrolet Blazer Support Strut, Driver Side Part Number: 15003615
Product Specifications
- Other Name: Strut Assembly-Lift Gate; Liftgate Lift Support; Door Lift Support; Lift Support; Strut, End Gate Support
- Position: Driver Side
- Replaces: 15149359
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1997-2004 Chevrolet Blazer | Base, LS, LT, Trailblazer, Xtreme, ZR2 | 6 Cyl 4.3 L GAS
View related parts
Chevrolet Blazer Strut Part Number: 15030549
$46.49 MSRP: $72.80
You Save: $26.31 (37%)
Product Specifications
- Other Name: Strut, End Gate Window; Back Glass Lift Support; Lift Support; Strut, End Gate Support
- Replaces: 15977110
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1995-1997 Chevrolet Blazer | Base, LS, LT | 6 Cyl 4.3 L GAS
View related parts
Chevrolet Blazer Support Strut, Rear Passenger Side Part Number: 15692318
Product Specifications
- Other Name: Strut, Rear Compartment Lid Or Tail Gate Counter Balance; Back Glass Lift Support; Liftgate Lift Support; Lift Support; Support Cylinder; Strut, End Gate Support
- Position: Rear Passenger Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1992-1994 Chevrolet Blazer | Base, Cheyenne, Silverado, Silverado Sport | 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL
View related parts
Chevrolet Blazer Support Strut, Rear Driver Side Part Number: 15692317
Product Specifications
- Other Name: Strut, Rear Compartment Lid Or Tail Gate Counter Balance; Back Glass Lift Support; Liftgate Lift Support; Lift Support; Support Cylinder; Strut, End Gate Support
- Position: Rear Driver Side
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1992-1994 Chevrolet Blazer | Base, Cheyenne, Silverado, Silverado Sport | 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL
View related parts
Chevrolet Blazer Support Strut, Rear Part Number: 15692316
Product Specifications
- Other Name: Strut, Rear Compartment Lid Or Tail Gate Counter Balance; Back Glass Lift Support; Liftgate Lift Support; Lift Support; Support Cylinder; Strut, End Gate Support
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1992-1994 Chevrolet Blazer | Base, Cheyenne, Silverado, Silverado Sport | 8 Cyl 5.7 L GAS, 8 Cyl 6.5 L DIESEL

Chevrolet Blazer Tailgate Lift Support

Want to cut long-term maintenance and repair costs? Choose OEM Tailgate Lift Support. Those parts deliver top durability you can trust. On our site, you'll find a huge catalog of genuine Chevrolet Blazer parts. Prices are unbeatable, so you can keep more in your pocket. Every OEM Chevrolet Blazer Tailgate Lift Support includes a manufacturer's warranty. You can also get an easy return policy that keeps buying risk free. Fast delivery, get your car on the road quickly. It's simple to search, compare, and order. Stop guessing about quality or fit. Order today and save with parts that last.

The Tailgate Lift Support in Chevrolet Blazer helps at those occasions when the rear lid needs to be opened so as to access the boot or trunk while at the same time, not having to let go of anything or use any hand to support the lid. This involves using charged cylinders of gas to press on the lid to open it gently and once lifted, the lid does not slam back again. There have been different types of lift support fitted over the Chevrolet Blazer years, with most designs concentrating on the weight of the flipper and the pressure applied by the support struts. Lift supports have to work correctly, since the signs of mechanical wear or the general issue with some of the parts might result in frequent shutdown and dangerous consequences. In order to maintain continued convenience and safety to users of this model of automobile, it is important to conduct frequent servicing or replacement of these Tailgate Lift Supports.

Chevrolet Blazer Tailgate Lift Support Parts and Q&A

Strut
15678975
Q: How to replace the Tailgate Lift Support on Chevrolet Blazer?
A:
Begin your tailgate shock/support replacement process by opening and supporting the endgate. The endgate struts' retainer clips need to be lifted using a small flat-bladed tool before removing the upper end from the Ball Joint then the lower end. The next step involves taking out the endgate struts from the endgate assembly. To install the new endgate struts simply place them onto the endgate then push the upper end into the Ball Joint before fully seating it followed by securing the lower end. The installation process ends when both ends of the endgate struts reach their secure position. At that point, remove the support fixture from the endgate for closure.