How to Ensure Proper Installation of a Bumper on Chevrolet Camaro?

Changing the rear bumper fascia on a Chevrolet begins with vehicle elevation while providing adequate support. Begin the process by removing push-in retainers that are underneath the fascia, then proceed with unfastening the bumper fascia nuts and bolts. Start by decreasing the vehicle height and afterward eliminate the components including rear end finish panel and spare tire and jack. Begin by removing the upper push-in retainers on the fascia top then unfastening the harness connector rosebud clip and disconnecting the rear body wiring harness connector from the fascia wiring harness connector. The technician must now detach the rear bumper fascia from the actual vehicle. You should begin the installation process by applying the rear bumper fascia and connecting the rear body wiring harness connector to the rear fascia wiring harness connector followed by harness connector rosebud clip attachment to the fascia. After installing the upper push-in retainers, spare tire and jack, replace the rear end finish panel. After raising the vehicle for the second time install the bumper fascia bolts while tightening them to 2 N.m (18 lb in). First tighten all bumper fascia nuts to 6 N.m (53 lb in) while removing these nuts after installing push-in retainers that sit underneath the fascia.

How to replace the rear bumper fascia on Chevrolet Camaro?

A Chevrolet owner must raise and support their vehicle before they begin replacement of the rear bumper fascia. The first step is to remove fasteners and push-in retainers found beneath the fascia before removing the bumper fascia nuts and bolts. Start by lowering the vehicle and then proceed to detached the rear end finish panel along with the spare tire and jack. The first step is to remove the upper push-in retainers situated at the fascia top and detach the harness connector rosebud clip followed by disconnecting the rear body wiring harness connector from the fascia wiring harness connector. Next move on to remove the rear bumper fascia that sits on the vehicle. Start installation by mounting the rear bumper fascia on the vehicle while also joining the rear body wiring harness connector with the fascia wiring harness connector and then add the harness connector rosebud clip and put in the upper push-in retainers. Secure the spare tire first before installing the rear end finish panel together with the jack. Securely reposition the automobile after elevation then fasten the bumper fascia bolts with torque at 2 N.m (18 lb in). You should start by tightening the bumper fascia nuts to 6 N.m (53 lb in) and proceed to install the push-in retainers located underneath the fascia before lowering the vehicle.

OEM Chevrolet Camaro Bumper

Bumper Fascia

Select Vehicle by Model
Select Vehicle by VIN

Select Vehicle by Model

Make

Model

Year

Select Vehicle by VIN

For the most accurate results, select vehicle by your VIN (Vehicle Identification Number).

72 Bumpers found

View related parts
Chevrolet Camaro Bumper Cover, Front Part Number: 22997719
$512.86 MSRP: $767.85
You Save: $254.99 (34%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Fascia Assembly-Front Bumper *Service Primer; Fascia, Front And Rear Bumper/Fascia Face
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2014-2015 Chevrolet Camaro | SS | 8 Cyl 6.2 L GAS
View related parts
Chevrolet Camaro Bumper Cover, Rear Upper Part Number: 84144493
$537.73 MSRP: $805.19
You Save: $267.46 (34%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Fascia Assembly-Rear Bumper Upper *Service Primer; Fascia, Front And Rear Bumper/Fascia Face
- Position: Rear Upper
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2017-2018 Chevrolet Camaro | ZL1 | 8 Cyl 6.2 L GAS
View related parts
Chevrolet Camaro Bumper Cover, Front Part Number: 22997721
$519.70 MSRP: $778.12
You Save: $258.42 (34%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Fascia Assembly-Front Bumper *Service Primer; Fascia, Front And Rear Bumper/Fascia Face
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2014-2015 Chevrolet Camaro | SS | 8 Cyl 6.2 L GAS
View related parts
Chevrolet Camaro Bumper Cover Part Number: 84676732
$576.30 MSRP: $863.12
You Save: $286.82 (34%)
ADD TO CART
Product Specifications
- Other Name: Fascia Assembly-Rear Bumper Upper *Service Primary; Fascia, Front And Rear Bumper/Fascia Face
- Replaces: 84574472, 84509966, 84626378
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2019-2024 Chevrolet Camaro | ZL1 | 8 Cyl 6.2 L GAS
View related parts
Chevrolet Camaro Bumper Cover, Front Part Number: 84380528
$721.40 MSRP: $1081.03
You Save: $359.63 (34%)
ADD TO CART
Product Specifications
- Other Name: Fascia Package-Front Bumper *Service Primer; Fascia Package, Front And Rear Bumper/Fascia Face; Fascia, Front And Rear Bumper/Fascia Face
- Position: Front
- Replaces: 84280755
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2017-2024 Chevrolet Camaro | ZL1 | 8 Cyl 6.2 L GAS
View related parts
Chevrolet Camaro Bumper Cover, Rear Part Number: 12335527
$326.39 MSRP: $487.98
You Save: $161.59 (34%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Fascia, Rear Bumper (Primed); Fascia, Front And Rear Bumper/Fascia Face
- Position: Rear
- Replaces: 12335512
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1993-2002 Chevrolet Camaro | Base, Indianapolis 500 Pace Car, RS, Z28, Z28 SS | 6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS, 8 Cyl 5.7 L GAS
View related parts
Chevrolet Camaro Bumper Cover Part Number: 22894196
$526.81 MSRP: $791.16
You Save: $264.35 (34%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Fascia, Front And Rear Bumper/Fascia Face
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2012-2013 Chevrolet Camaro | ZL1 | 8 Cyl 6.2 L GAS
View related parts
Chevrolet Camaro Bumper Cover, Rear Upper Part Number: 23164145
$518.00 MSRP: $775.57
You Save: $257.57 (34%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Fascia Assembly-Rear Bumper Upper *Service Primer; Fascia, Front And Rear Bumper/Fascia Face
- Position: Rear Upper
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2014-2015 Chevrolet Camaro | LS, LT, SS, ZL1 | 6 Cyl 3.6 L GAS, 8 Cyl 6.2 L GAS
View related parts
Chevrolet Camaro Bumper Cover, Rear Upper Part Number: 23404808
$544.83 MSRP: $815.86
You Save: $271.03 (34%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Fascia Assembly-Rear Bumper Upper *Service Primer; Fascia, Front And Rear Bumper/Fascia Face
- Position: Rear Upper
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2016-2018 Chevrolet Camaro | LS, LT, SS | 4 Cyl 2.0 L GAS, 6 Cyl 3.6 L GAS, 8 Cyl 6.2 L GAS
View related parts
Chevrolet Camaro Bumper Cover Part Number: 84209672
$339.43 MSRP: $505.12
You Save: $165.69 (33%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Fascia, Front And Rear Bumper/Fascia Face
- Position: Front
- Replaces: 84016730, 84058370
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2017-2018 Chevrolet Camaro | LS, LT | 4 Cyl 2.0 L GAS, 6 Cyl 3.6 L GAS
View related parts
Chevrolet Camaro Lower Cover Part Number: 22829478
$206.65 MSRP: $306.59
You Save: $99.94 (33%)
ADD TO CART
Product Specifications
- Other Name: Fascia, Front And Rear Bumper/Fascia Face
- Position: Rear Lower
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2014-2015 Chevrolet Camaro | ZL1 | 8 Cyl 6.2 L GAS
View related parts
Chevrolet Camaro Lower Cover Part Number: 84306917
$296.45 MSRP: $440.85
You Save: $144.40 (33%)
ADD TO CART
Product Specifications
- Other Name: Fascia, Front And Rear Bumper/Fascia Face
- Position: Rear Lower
- Replaces: 84144494
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2017-2024 Chevrolet Camaro | ZL1 | 8 Cyl 6.2 L GAS
View related parts
Chevrolet Camaro Bumper Cover, Rear Upper Part Number: 23164146
$452.01 MSRP: $676.47
You Save: $224.46 (34%)
Ships in 1-3 Business Days
ADD TO CART
Product Specifications
- Other Name: Fascia Assembly-Rear Bumper Upper *Service Primer; Fascia, Front And Rear Bumper/Fascia Face
- Position: Rear Upper
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2014-2015 Chevrolet Camaro | LS, LT, SS, Z/28 | 6 Cyl 3.6 L GAS, 8 Cyl 6.2 L GAS, 8 Cyl 7.0 L GAS
View related parts
Chevrolet Camaro Cover Part Number: 16503496
$334.27 MSRP: $499.75
You Save: $165.48 (34%)
Product Specifications
- Other Name: Fascia, Front And Rear Bumper/Fascia Face; Fascia, Front End/Bumper Filler
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1985-1992 Chevrolet Camaro | Base, Iroc-Z, RS, RS Heritage Edition, Z28, Z28 Heritage Edition | 6 Cyl 2.8 L GAS, 6 Cyl 3.1 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS
View related parts
Chevrolet Camaro Front Spoiler Part Number: 22997432
Product Specifications
- Other Name: Fascia, Front And Rear Bumper/Fascia Face; Fascia, Front End
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2014-2015 Chevrolet Camaro | LS, LT, SS | 6 Cyl 3.6 L GAS, 8 Cyl 6.2 L GAS
View related parts
Chevrolet Camaro Front Spoiler, Black Part Number: 22745060
Product Specifications
- Other Name: Fascia Assembly-Front Bumper *Black; Fascia, Front Bumper
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 2011-2013 Chevrolet Camaro | SS | 8 Cyl 6.2 L GAS
View related parts
Chevrolet Camaro Bumper Cover, Front Part Number: 10248139
$281.08 MSRP: $420.23
You Save: $139.15 (34%)
Product Specifications
- Other Name: Fascia-Front Bumper; Fascia, Front And Rear Bumper/Fascia Face
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1993-1997 Chevrolet Camaro | Base, Indianapolis 500 Pace Car, RS, Z28 | 6 Cyl 3.4 L GAS, 6 Cyl 3.8 L GAS, 8 Cyl 5.7 L GAS
View related parts
Chevrolet Camaro Cover, Rear Part Number: 5972941
Product Specifications
- Other Name: Fascia, Rear Bumper; Fascia, Front And Rear Bumper/Fascia Face
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1985-1987 Chevrolet Camaro | Berlinetta, LT, Sport | 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 8 Cyl 5.0 L GAS
View related parts
Chevrolet Camaro Cover, Front Part Number: 16503478
Product Specifications
- Other Name: Fascia, Front End/Bumper Filler
- Position: Front
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1985-1987 Chevrolet Camaro | Berlinetta, LT, Sport | 4 Cyl 2.5 L GAS, 6 Cyl 2.8 L GAS, 8 Cyl 5.0 L GAS
View related parts
Chevrolet Camaro Cover Part Number: 16503484
Product Specifications
- Other Name: Fascia, Front And Rear Bumper/Fascia Face
- Position: Rear
- Warranty: This genuine part is guaranteed by GM's factory warranty.
Fits the following Vehicles:
- 1985-1990 Chevrolet Camaro | Base, Iroc-Z, RS, Z28 | 6 Cyl 2.8 L GAS, 6 Cyl 3.1 L GAS, 8 Cyl 5.0 L GAS, 8 Cyl 5.7 L GAS

| Page 1 of 4 |Next >

1-20 of 72 Results

Chevrolet Camaro Bumper

Want to cut long-term maintenance and repair costs? Choose OEM Bumper. Those parts deliver top durability you can trust. On our site, you'll find a huge catalog of genuine Chevrolet Camaro parts. Prices are unbeatable, so you can keep more in your pocket. Every OEM Chevrolet Camaro Bumper includes a manufacturer's warranty. You can also get an easy return policy that keeps buying risk free. Fast delivery, get your car on the road quickly. It's simple to search, compare, and order. Stop guessing about quality or fit. Order today and save with parts that last.

Chevrolet Camaro Bumper Parts and Q&A

Bumper Cover
12335525
Q: How to Ensure Proper Installation of a Bumper on Chevrolet Camaro?
A:
Changing the rear bumper fascia on a Chevrolet begins with vehicle elevation while providing adequate support. Begin the process by removing push-in retainers that are underneath the fascia, then proceed with unfastening the bumper fascia nuts and bolts. Start by decreasing the vehicle height and afterward eliminate the components including rear end finish panel and spare tire and jack. Begin by removing the upper push-in retainers on the fascia top then unfastening the harness connector rosebud clip and disconnecting the rear body wiring harness connector from the fascia wiring harness connector. The technician must now detach the rear bumper fascia from the actual vehicle. You should begin the installation process by applying the rear bumper fascia and connecting the rear body wiring harness connector to the rear fascia wiring harness connector followed by harness connector rosebud clip attachment to the fascia. After installing the upper push-in retainers, spare tire and jack, replace the rear end finish panel. After raising the vehicle for the second time install the bumper fascia bolts while tightening them to 2 N.m (18 lb in). First tighten all bumper fascia nuts to 6 N.m (53 lb in) while removing these nuts after installing push-in retainers that sit underneath the fascia.
Bumper Cover, Rear
12335527
Q: How to replace the rear bumper fascia on Chevrolet Camaro?
A:
A Chevrolet owner must raise and support their vehicle before they begin replacement of the rear bumper fascia. The first step is to remove fasteners and push-in retainers found beneath the fascia before removing the bumper fascia nuts and bolts. Start by lowering the vehicle and then proceed to detached the rear end finish panel along with the spare tire and jack. The first step is to remove the upper push-in retainers situated at the fascia top and detach the harness connector rosebud clip followed by disconnecting the rear body wiring harness connector from the fascia wiring harness connector. Next move on to remove the rear bumper fascia that sits on the vehicle. Start installation by mounting the rear bumper fascia on the vehicle while also joining the rear body wiring harness connector with the fascia wiring harness connector and then add the harness connector rosebud clip and put in the upper push-in retainers. Secure the spare tire first before installing the rear end finish panel together with the jack. Securely reposition the automobile after elevation then fasten the bumper fascia bolts with torque at 2 N.m (18 lb in). You should start by tightening the bumper fascia nuts to 6 N.m (53 lb in) and proceed to install the push-in retainers located underneath the fascia before lowering the vehicle.